Genesis Advanced Technologies 1.1 owner manual Imaging and Soundstage

Page 15

~ÄëçäìíÉ=ÑáÇÉäáíó

2.2Imaging and Soundstage

One great advantage of a true line-source is that good imaging and soundstage is a given. However, it is possible to fine-tune the system for ultimate enjoyment.

If your vocal selection is a well-recorded audiophile CD or LP with good soundstaging information, the performer should appear to come from behind the loudspeakers and be at the appropriate height for a standing person.

If the vocal appears to be larger than life, you should first check the system volume. Is it a volume that would be appropriate for someone actually singing in your room? If there is too much volume the artist will appear too big, and the opposite is true for too little volume.

If the volume is set correctly and the image is still too big, place the woofer towers closer together or closer to the midrange/ tweeter wings and re-listen. Repeat this process till you have it right. Having the woofer towers inside of the midrange/tweeter wings is rarely the correct solution. If the image is still too large, try moving the midrange/tweeter wings closer together.

If the voice is too low in height, turn the Midrange Control to the next higher position and the image of the voice will move upward slightly.

If you have the speakers only 20% away from the front wall, and you are not getting enough front to back depth (the singer not appearing behind the speaker enough), pull the midrange tweeter panels away from the front wall a little bit at a time. If you do not have them pulled far enough away, you may not have enough front to back depth. If you get the speakers much beyond 1/3 of the way into the room (or 27 ft), it is unlikely that pulling them further away will have any further effect.

Find the best compromise for your room, your tastes and your space requirements. If the speakers are too far apart you will lose the side image and if they are too close together you will have too small a center stage. We recommend you begin with the midrange/tweeter wings six to eight feet apart as measured from tweeter to tweeter. If you are not getting proper focus on the voice, you may angle the midrange panels about 5 to 10 degrees towards your seating position until you have a properly defined center image.

Ver 2.0

15

 

Page 14 Page 16
Image 15
Page 14 Page 16
Contents ~ÄëçäìíÉ=ÑáÇÉäáíó Details Message from Genesis ~ÄëçäìíÉ=ÑáÇÉäáíó Unpacking Set-up Guide~ÄëçäìíÉ=ÑáÇÉäáíó ~ÄëçäìíÉ=ÑáÇÉäáíó Placement of the Genesis 1.1 Loudspeaker Woofer Connections Servo-controlled Bass Amplifier Connections Crossover Connections Remote Control Crossover Controls Tuning the systemBegin with the bass level Imaging and Soundstage Phase Control Running-in the System Make One Change at a Time Further adjustmentsAppropriate Mid-bass Balance Defining the SoundstageRoom Treatment Mastering the Refinements of the system Design Philosophy Dipolar Line Source TechnologyGenesis Ribbon Tweeter Servo-bass Advantage 75-inch midrange ribbonWoofer Tower Crossover Servo-controlled Amplifier/CrossoverSummary Corian Baffle, Wings and BasesSpecifications

1.1 specifications

Genesis Advanced Technologies 1.1 represents a significant leap forward in the realm of advanced audio technologies. This innovative product line is renowned for its uncompromising sound quality and cutting-edge design, catering to audiophiles and music enthusiasts who demand the best from their audio systems.

One of the standout features of Genesis Advanced Technologies 1.1 is its proprietary driver technology. These drivers are meticulously engineered to produce an incredibly accurate and detailed sound stage, allowing listeners to experience music as it was intended by the artists. The advanced materials used in the drivers ensure exceptional linearity and reduced distortion, even at high volume levels. This attention to detail means that every note, from the softest piano keys to the most vigorous orchestral crescendos, is rendered with clarity and fidelity.

In addition to its bespoke drivers, Genesis Advanced Technologies 1.1 incorporates advanced crossover networks. These crossover systems intelligently distribute frequencies between drivers, optimizing performance and ensuring seamless integration across the entire frequency spectrum. This results in a rich and immersive listening experience, making it easy for users to pick out subtle background details in their favorite tracks.

Another significant aspect of Genesis Advanced Technologies 1.1 is its elegant design. The enclosures are not only aesthetically pleasing but are also constructed from high-quality materials designed to minimize resonances and vibrations. The use of innovative dampening techniques enhances the overall audio performance, creating a solid foundation for sound reproduction.

The technology behind Genesis Advanced Technologies also includes sophisticated tuning processes, which calibrate each unit for optimal acoustic performance in various listening environments. Users can often customize settings to suit their room dynamics, achieving a perfectly balanced sound tailored to their individual preferences.

In terms of connectivity, Genesis Advanced Technologies 1.1 supports a variety of options, catering to both traditional and modern audio systems. This versatility ensures compatibility with a wide range of sources, including high-resolution digital formats, vinyl, and streaming services.

Overall, Genesis Advanced Technologies 1.1 embodies a commitment to excellence in audio performance. With its blend of state-of-the-art technology, meticulous craftsmanship, and user-centric design, it continues to set the standard in the high-end audio market. Whether for casual listening or critical evaluation, Genesis Advanced Technologies 1.1 delivers an unparalleled auditory experience that is sure to delight even the most discerning audiophiles.
Top Page Image Contents