
CAUTION: POTENTIALLY HAZARDOUS SITUATION! If not avoided, MAY RESULT in minor or moderate injury. It may also be used to alert against unsafe practices.
NOTATIONS
NOTE: General reference information for proper operation and maintenance practices.
IMPORTANT: Specific procedures or information required to prevent damage to unit or attachment.
PRACTICES AND LAWS
Practice usual and customary safe working precautions, for the benefit of yourself and others. Understand and follow all safety messages. Be alert to unsafe conditions and the possibility of minor, moderate, or serious injury or death. Learn applicable rules and laws in your area.
REQUIRED OPERATOR TRAINING
If unit is to be used by someone other than original purchaser, loaned, rented or sold, ALWAYS provide this manual and any needed safety training before operation.
SAFETY DECALS AND
LOCATIONS
ALWAYS replace missing or damaged Safety Decals. Refer to (Figure 2) below for Safety Decal locations.
1
OX0115
Figure 2
1.DANGER! TO AVOID SERIOUS INJURY OR DEATH
Read the Operator’s Manual.
OL1801
Always wear protective glasses, goggles or a face shield.
Always wear adequate OL4740 hearing protection.
Do not operate when children or others are
around.
OL4370
Remove objects that could be thrown by the cutter line.
OL0910
Keep body parts away from rotating cutter line.
OL4620
Go across slopes, not up and down.
OL4610
•Keep safety devices (guards, shields, switches, etc.) in place and working.
•Look down and behind before and while moving backwards.
•Do not let debris accumulate. Debris could become a fire hazard or cause engine to overheat.
SAFETY RULES
If unit is to be used by someone other than original purchaser; loaned, rented or sold, ALWAYS provide this manual and any needed safety training before operation.
Read, understand and follow all safety practices in Owner/Operator Manual before beginning assembly. Failure to follow instructions could result in personal injury and/ or damage to unit.
GB - 4