ASSEMBLY
WARNING: AVOID INJURY. Read and understand the entire Safety section before proceeding.
TOOLS REQUIRED
• Box knife to cut carton
TO REMOVE UNIT FROM CARTON
1.Cut off top of box.
2.Remove packing material.
3.Remove literature pack, safety glasses and bottle of oil from box.
4.Cut out back of box and pull the unit out.
5.Remove protective packaging materials from trimming head and around unit.
ASSEMBLY |
|
| |
| 3 |
| 4 |
| 6 |
|
|
|
|
| 5 |
2 |
|
|
|
1 |
|
|
|
| 4 |
|
|
|
|
| OX0014 |
1. | Lower Handle | 3. | Carriage Bolt |
| Bar | 4. | Wing Knobs |
2. | Upper Handle | 5. | Bolt Holes |
| Bar | 6. | Control Bail |
| Figure 3 |
| |
Handlebar Assembly
1.Loosen handlebar wing knobs. Do not remove them.
2.Unfold handlebar to operating position.
NOTE: Adjust handlebar to a height comfortable for the operator. Be sure cable is clear of pinch points. Refer to Handlebars in Service and Adjustments.
3.Tighten handlebar wing knobs to secure upper handlebar.
Engine Crankcase Oil
Fill engine crankcase with proper amount and viscosity of oil. Refer to Engine Manual for specific information.
CHECKLIST
Please complete the following checklist before proceeding:
•All assembly instructions have been completed.
•No remaining loose parts in carton.
•Handlebar is adjusted comfortably and tightened securely.
While learning how to use your unit, pay extra attention to the following important items:
•Trimming line is fastened securely in holder.
•Fuel tank is filled with proper fuel.
•Engine crankcase is filled with oil.
•Become familiar with all controls – their location and function. Operate them before you start the engine.
GB - 7