Snapper LT145H38HBV, LT180H33IBV Mower Blade Replacement, Traction Drive Belt Replacement

Page 26

Section 4 - ADJUSTMENT & REPAIR

4.4.5. 33" MOWER BLADE REPLACEMENT (Continued)

6.Install new blade, part number 3-4168, onto blade mounting bar.

7.Torque 30 to 40 ft lbs.

4.4.6 TRACTION DRIVE BELT REPLACEMENT

It is necessary to remove deck in order to replace belts. Remove deck as follows:

1.Place tractor on a firm, level surface such as a driveway or garage floor and set the park brake.

2.Turn engine “OFF”. Remove key.

3.Lower the deck to lowest setting.

4.Disconnect the deck lift rod from the front lift arm. See Figure 4.22.

FRONT LIFT

ARM

FRONT LIFT

ROD

WASHER

HAIR PIN

FIGURE 4.22

WARNING

DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug. Engine and components can be extremely hot. Avoid burns by allowing engine and components sufficient time to cool.

4.4.6TRACTION DRIVE BELT REPLACEMENT Mower Deck Removal

5.Remove hair pins from the front deck hanger

rod. See Figure 4.23.

RIGHT

SIDE

SHOWN

FRONT

AXLE

FRONT DECK

HANGER ROD

FRONT LIFT ARM

HAIR PIN

6. Hold front of deck "UP" and slide the front deck

FIGURE 4.23

hanger rod to the right and out then lower the front of deck to the ground.

26

7.Remove hair pin and flat washer from rear deck hanger bracket on both sides of tractor.

8.Make note of hole used in sector plates.

9.Slide sector plates off of rear deck hanger brackets.

10.Slide deck forward.

Remove deck drive belt from engine pulley bottom groove. See Figure 4.24.

33” BELT GUIDES SHOWN

ENGINE PULLEY

BOTTOM GROOVE

FIGURE 4.24

12.Slide deck back and disconnect spring from tension idler.

13.Pull deck from under tractor from R.H. side.

Traction drive belt removal

1.Remove two belt guide mounting bolts from each side of tractor frame. See Figure 4.25.

BELT GUIDE

MOUNTING

BOLTS (2 EACH

SIDE)

BELT

GUIDE

FIGURE 4.25

Image 26
Contents European Lawn Tractor Hydrostatic Drive Series H Model Number ExplanationImportant Safety Instructions Operation From PreviousTable of Contents Familiarization Components ControlsFamiliarization Decals / Symbols Lights on Engine OFF Engine on Start PRE-START Checklist OPERATOR’S Seat Adjustment Front to Rear AdjustmentStarting & Operation Starting Engine OFFStopping ENGINE, BLADE, Wheel Drive Stopping Engine Starting & Operation 2.3.2. Starting Wheel DriveStarting Mower Blade Stopping Wheel DriveStopping Stopping Mower Blade Setting Park BrakeCutting Height Adjustment Releasing Park BrakeRolling Tractor with Engine OFF Rolling Hydro Models Reverse Lockout Mechanism Reverse Lockout Mechanism OverrideChange Engine OIL Service After First 5 HoursIntroduction Check Blade BrakeMower Components Service Every 25 Operating Hours Check EngineCheck 33 Deck Drive Belt Tractor Lubrication Annually END of Each Season Fuel FilterAnnually END of Each Season 3.4.2. Fuel Filter Spark Plug Hydrostatic Transmission OILDeck Blade Brake Adjustment Engine Adjustments & RepairBlade Brake Adjustment On nextBlade Belt Adjustment 33 Deck from previous Adjusting Mower Blade 33 Decks OnlySide View of Deck Deck Level Adjustment Side to Side Deck Level Adjustment Front to Rear Sector Plates Deck Level Adjustment Front to Rear Front Lift RODShifter Adjustment Tractor Drive Components 4.3.1. Brake AdjustmentSteering Adjustment Mower Blade Service Standard Blade Wear Limits Standard Blade Sharpening Mower Blade ReplacementNinja Blade Wear Limits Ninja Blade SharpeningTraction Drive Belt Replacement Mower Deck Removal Mower Blade ReplacementTraction Drive Belt Replacement Traction drive belt removalMower Deck Removal Traction drive belt replacementTraction drive belt removal from previous View from Underneath TractorDeck Belt Removal & Replacement 33 Deck Drive Belt Traction drive belt replacement from previousDeck Belt Removal & Replacement Deck Drive BeltBattery Service Battery Battery RemovalBattery Installation Battery StorageBattery Testing NEW Battery PreparationAvailable Accessories Electrical System Electrical System Troubleshooting Guide Uneven tire pressure Bring to proper pressure Ninja Tractor Drive Belts Mower BladesModel No Engine to Transmission Engine to Deck Standard ELT145H33HBVYear Limited Warranty Disclaimer of WarrantyService Notes Service Notes European Lawn Tractor Hydrostatic Drive Series H

LT150H38IBV, WLT145H38HBV, LT150H38HKV, LT180H38IBV, LT180H33IBV specifications

The Snapper ELT145H33HBV, LT150H33IBV, LT145H33HBV, LT145H38HBV, and WLT150H38IBV are a series of high-performance lawn mowers engineered for both residential and commercial applications. These machines are designed to deliver superior cutting performance, ease of use, and durability, making them a preferred choice for landscape professionals and homeowners alike.

One of the standout features of these Snapper models is the powerful engine technology. The ELT145H33HBV features a robust 145cc engine that provides ample power for tackling large lawns with thick grass, while the LT150H33IBV boasts a 150cc engine designed for enhanced torque and cutting efficiency. Both engines are designed for easy starting and low maintenance, allowing users to quickly get to work without worrying about the typical hassles associated with engine upkeep.

These mowers are equipped with a high-performance cutting deck, which varies by model but generally features a wider design for increased cutting capacity. The LT145H33HBV, for instance, offers a precision-engineered deck that ensures an even cut across different terrains. The adjustable cutting height feature allows operators to choose from various settings, accommodating different grass types and personal preferences.

The usability of these models is further enhanced by ergonomic design features, including comfortable grips and easy-to-manage controls. The pull-start system is intuitive, ensuring that even novice users can operate the mowers with confidence. Additionally, many of these models feature foldable handles for improved storage and transport, making them ideal for users with limited space.

In terms of build quality, Snapper is recognized for its rugged construction. The mowers are designed to withstand tough conditions, featuring a robust frame and durable materials that resist wear and tear over time. This durability translates to longer lifespan and reliability, making these models cost-effective choices for long-term use.

Consumers will also benefit from Snapper’s commitment to innovation, incorporating advanced propulsion technologies. These mowers are often equipped with features that provide superior traction and stability, allowing for precise maneuverability even on hilly or uneven terrains.

Overall, the Snapper ELT145H33HBV, LT150H33IBV, LT145H33HBV, LT145H38HBV, and WLT150H38IBV are versatile, efficient, and dependable lawn mowers. With their combination of powerful engines, resilient design, and user-friendly features, these machines are tailored to meet the demands of both professional landscapers and everyday homeowners, ensuring a beautifully manicured lawn with minimal effort.