Snapper LT2044 manual Features & Controls

Page 13

Reverse Mowing Option (RMO)

The Reverse Mowing Option allows for mowing (or use of other PTO driven attachments) while traveling in reverse. If you choose to mow in reverse, turn the RMO key after the PTO is engaged. The L.E.D. light will illuminate, and the operator can then mow in reverse. Each time the PTO is engaged the RMO needs to be reactivated if desired.

PTO Switch

The PTO (Power Take-Off) switch engages and disengages attachments that use the PTO. To engage the PTO, pull UP on the switch. Push DOWN to disengage. Note that the operator must be seated firmly in the tractor seat for the PTO to function.

Ignition Switch

The ignition switch starts and stops the engine, it has three positions:

OFF

Stops the engine and shuts off the

 

electrical system.

RUN

Allows the engine to run and powers the

 

electrical system.

START

Cranks the engine for starting.

NOTE: Never leave the ignition switch in the RUN position with the engine stopped–this drains the battery.

Ground Speed Pedals

The tractor’s forward ground speed is controlled by the forward ground speed control pedal. The tractor’s reverse ground speed is controlled by the reverse ground speed control pedal.

Depressing either pedal will increase ground speed. Note that the further down the pedal is depressed, the faster the tractor will travel.

Cruise Control

The cruise control is used to lock the ground speed control in forward. The cruise control has five lock positions.

Features & Controls

Mower Height of Cut Adjustment

The mower cutting height adjustment lever controls the mower cutting height. The mower cutting height can be set to one of seven positions between 1-1/4” and 4.”

Seat Adjustment Lever

The seat can be adjusted forward and back. Move the lever, position the seat as desired, and release the lever to lock the seat into position.

Transmission Release Valve Lever

The transmission release valve lever deactivates the transmission so that the tractor can be pushed by hand. See PUSHING THE TRACTOR BY HAND for operational information.

Fuel Tank

To remove the cap, turn counterclockwise.

12V Power Outlet (Select Models)

The power outlet is 12V-DC. Accessory must be rated at 9 amps or less.

Fuel Level Gauge

Displays the fuel level in the tank.

Parking Brake

The parking brake knob is used to lock the parking brake when the tractor is stopped. Fully depressing the brake pedal and pulling up on the knob engages the parking brake. Refer to page 12 for a full explanation of parking brake functions.

Brake Pedal

Depressing the brake pedal applies the tractor brake.

11

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 20HP Hydro Tractors Mower Decks 18.5HP Hydro Tractors Mower Decks1734103 Page Table of Contents Safety Rules & Information Operating Safety Slope Operation Safety Rules and InformationGeneral Operation Safety Rules & InformationIgnition System Safe Handling of Gasoline Service & MaintenanceCE Identification Tag Markings Identification NumbersTractor ID Tag Mower ID Tag Safety Decals Safety DecalsSafety Icons Decals Locations CE Safety IconsThrottle Control Control FunctionsChoke HeadlightsFeatures & Controls Parking Brake Function Volt Power OutletCruise Control Operation HourmeterOperational Safety Checks General Operating SafetyAdding Fuel Starting The EngineOperating the Tractor Installing the Mower Deck Mower Deck Removal & InstallationRemoving the Mower Deck Muffler and surrounding areas may be hotAttaching a Trailer Adjusting Mower Cutting HeightStorage Before Every Spring Each Hours 100 250 Fall Use Check Tire PressuresBefore Every Spring Each Hours 100 Fall Use SizeSafety Interlock System Check Regular MaintenancePTO Clutch Adjustment Check Engine Maintenance Battery MaintenanceHood Removal and Installation Transmission MaintenanceK46 Maintenance Transmission IdentificationLubrication Service Interval Every 25 HoursOil GreaseLubricate Rear Axle Shafts Service Interval YearlyServicing the Mower Blades Service Interval Every 100 Hours or As RequiredCheck & Fill Engine Oil Open ValveClosed Pre-Cleaner Service Air Filter Removal & InstallationAir Filter Service Air FilterBriggs & Stratton Single Cylinder Models Replace Spark Plug Troubleshooting Troubleshooting Adjustment, & ServiceTroubleshooting the Mower Seat Adjustment Troubleshooting, Adjustment, & ServiceBattery Charging Brake AdjustmentAdjust PTO Clutch Window Adjustment Nut Feeler Gauge PTO clutch adjustmentMower Adjustments Fuse ReplacementGauge Wheels Select Models 1/2 Max High cut Leveling The MowerTo avoid damaging belts, do not PRY Mower Belt Replacement18.5 HP* Briggs & Stratton 20 HP* Briggs & StrattonLT Series K46Maintenance Items Replacement PartsTechnical Manuals Page Lawn Care Lawn Care & Mowing Information

LT2044 specifications

The Snapper LT2044 is a versatile and robust lawn tractor designed for homeowners who prioritize efficiency and comfort in their lawn care routine. With its powerful engine and innovative features, the LT2044 is capable of handling a variety of mowing tasks, making it a go-to choice for lawn enthusiasts.

At the heart of the LT2044 is a reliable 20 horsepower engine, which provides ample power to tackle larger lawns and tackle tough grass with ease. The engine features an automatic choke system, ensuring smooth starts in any weather condition. With a hydrostatic transmission, operators can enjoy seamless speed control without the need for gear shifting. This advanced transmission system allows for effortless maneuverability, especially in tight spaces and around obstacles such as trees or garden beds.

One of the standout features of the Snapper LT2044 is its 44-inch cutting deck. This deck is made from durable materials, ensuring longevity and consistent performance over time. The cutting height can be easily adjusted from 1.5 to 4 inches, giving users the flexibility to achieve their desired lawn finish. Additionally, the deck is equipped with a mulching capability, allowing homeowners to finely chop grass clippings that can then nourish the lawn, reducing waste and the need for bagging.

Comfort is another key aspect of the LT2044. It features an ergonomic seat and steering wheel, designed to reduce strain during longer mowing sessions. The tractor also includes easy-to-use controls, allowing users to operate the machine effortlessly. Its compact design enhances maneuverability, making it easier to navigate through narrow paths and corners.

For added convenience, the Snapper LT2044 comes with a 12-volt battery for easy starting and operates quietly, making it ideal for residential areas where noise can be a concern. The tractor is also compatible with various attachments, such as baggers and mulchers, further enhancing its versatility.

In summary, the Snapper LT2044 lawn tractor combines power, efficiency, and comfort, making it an excellent choice for those seeking a reliable machine for lawn maintenance. With its numerous features and technologies, this tractor is well-equipped to handle a range of yard sizes and challenges, providing homeowners with a dependable solution for all their lawn care needs.
Top Page Image Contents