Philips FW380C AM Antenna Connection, FM Wire Antenna Connection, Speaker Connections, System

Page 11

AAM Antenna Connection

Connect the supplied loop antenna to the AM AERIAL terminal. Place the AM loop antenna far away from the system and adjust its position for the best reception.

BFM Wire Antenna Connection

Connect the supplied FM wire antenna to the FM AERIAL 300 Ω terminal. Adjust the position of the FM antenna for the best reception.

Outdoor Antenna

For better FM stereo reception connect an outdoor FM antenna to the FM AERIAL 300 Ω terminal using a 300 Ω dipole wire.

CSpeaker Connections

Connect the right speaker to Front terminal R, with the red wire to +and the black wire to -.

Connect the left speaker to Front terminal L, with the red wire to +and the

black wire to -.

12 mm

 

• Clip the stripped portion

 

 

 

of the speaker wire as

 

 

shown.

unlock

lock

 

DSurround Speakers Connection

(for FW386C and FW65C only)

4-Speakers Connection

Front speakers : Connect the black wires to the black FRONT terminals and the red wires to the red FRONT terminals.

Rear (surround) speakers : Connect the black or non- marked wires to the black REAR terminals and the white or marked wires to the grey REAR terminals.

Positioning the Speakers

To get the best surround sound effect, place the speakers as follow.

 

MINI HIFI

FRONT

SYSTEM

FRONT

LEFT

RIGHT

 

TV

SURROUND

SURROUND

LEFT

RIGHT

Front Left and Right Speakers

For best listening effect, it is recommended to have the Left and Right speakers to form an angle of approximately 45 degrees to the listener. Should the magnetic field from the speakers affect the picture of the television, you should increase the separation distance.

Rear (surround) Speakers

The surround speaker should be placed at normal listening ear level. It can also be mounted on the wall at the back of the room. Most important , sometimes you need to experiment creatively when placing the surround speakers in order to obtain the most ideal sound projection.

PREPARATION

EConnecting other equipment to your

system

You can connect the audio left and right OUT terminals of a TV, VCR, Laser Disc or DVD player to the AUX IN terminals at the rear of the system.

FSubwoofer Out Connection

You can connect either an optional active subwoofer or an optional wireless active subwoofer to the SUBWOOFER OUT terminal. The wireless system uses a radio frequency transmitter. The subwoofer reproduces just the low bass effect (e.g. explosions, the rumble of the spaceships, etc.). Be sure to follow the instructions supplied with the subwoofer unit.

Note:

Availability of wireless transmitter and its peripherals are subjected to the approval of local authorities. Please check with respective local safety or approving authority.

GAC Power Supply

After all other connections have been made, connect the AC power cord to the system and to the wall outlet.

English

11

Image 11
Contents FW65C Which you should read the enclosed literature closely to For Customer UseDear Philips Magnavox product owner Congratulations on your purchase, and welcome to the familySet complies with the FCC-Rules, Part 15 and with 21 CFR AvisEnglish Class Laser ProductSafety Instructions Read before operating equipment Safety Instructions WHO is COVERED? Audio SystemContents General Information Safety Information Rear Connections PreparationSpeaker Connections FM Wire Antenna ConnectionAC Power Supply AM Antenna ConnectionFW318C ControlsPlay ƒ To start playback CD / CDTape / Tape 1 To start recordingTo cancel demonstration mode Remote Control Operating the SystemInserting batteries into the Remote Control Demonstration modeSelecting the Source Switching the system onSwitching the system to standby mode To switch off DBBPress Openclose Loading the CD ChangerCD Direct Play Playing a CDSearching for a particular passage during playback Erasing the program in the stop modeDisc Change Selecting a desired trackTo shuffle all the discs and tracks Shuffle only on remote controlRepeat only on remote control TunerAutomatic programming Tuning to radio stationsStoring Preset Stations Tuning to Preset Radio StationsRewind/Fast Forward TapeLoading a tape Tape PlaybackSelecting External Equipment AUXContinuous Playback From Tape Deck 2 to Tape Deck Current source will be recorded on tape deck Position of Volume or DBBRecording For six to seven secondsPress CD, TUNER, Tape or AUX CD Synchro Start RecordingRecording from other sources deck Load a blank tape into tape deckClock TimerTimer Setting Clock SettingMaintenance MaintenanceSpeakers Front Left/Right SpecificationsSpecifications Speakers Left/RightGeneral CD Player OperationRadio Reception Tape Deck Operation