Timer Setting, View Clock, Clock Setting

English

CLOCK

•MAX

Notes:

–During clock setting, if no button is pressed within 90 seconds, the system will exit clock setting mode automatically.

–When a power interruption occurs, the clock setting is erased.

•	The system can switch on to CD or TUNER mode
	automatically at a preset time. It can serve as an alarm
	to wake you up. After half an hour from the preset time,
	the system will return to the standby mode if no button
	is pressed.
•	Before setting the timer, make sure the clock is set
	correctly.
•	The timer has to be reset or start again for each
	subsequent preset time.
•	The volume of the timer will be at the last setting

You can view the clock (if it is set) at standby or any source mode. It will be displayed for about 7 seconds.

•Press CLOCK•TIMER briefly.

ª“10:25 PM” (the current time) will be displayed.

ª“--:--” will be displayed if the clock is not set.

The clock is set in 12-hour mode, e.g. “12:00 AM“ or “12:00 PM“. Before setting the clock, you must be in the View Clock mode.

1Press CLOCK•TIMER to select clock mode.

ª“12:00 AM” or the current time starts flashing.

ª“ˆ, ‡, ’, ‘, ‚” light up.

2Set the hour withÊˆor ‡.

3Set the minute withÊ’or ‘.

4Press CLOCK•TIMER again to store the setting.

ªThe clock starts running.

• To exit without storing the setting, press ‚.

before the set is switched to standby mode.

1Press and hold CLOCK•TIMER for more than 2 seconds to select timer mode.

ª“ON 12:00 AM” or the last set timer starts flashing. The TIMER flag flashes.

ªThe last selected source is lighted while other available sources are flashing.

ª“ˆ, ‡, ’, ‘, ‚” light up.

2Press CD or TUNER to select the desired source.

3PressÊˆor ‡to set the hour for the timer to start.

4PressÊ’or ‘to set the minute for the timer to start.

5Press CLOCK•TIMER to store the start time.

ªThe TIMER is now set.

ªThe TIMER flag remains on the display.

• To exit without storing the setting, press ‚.