Snapper Lawn Mower Discharge Assembly, To Change Discharge Components, Side Discharge Deflector

Page 5

DISCHARGE ASSEMBLY

NOTE: Discharge assemblies vary by model. Some assembly steps shown may not apply to your model.

Your mower comes with a recycling cover already installed, and is ready for use as a recycling mower. The recycling cover is designed to remain on the machine at all times, unless alternate discharge operations are desired, such as side discharging or bagging. Recycling cover can be removed to accommodate alternate discharge components.

TO CHANGE DISCHARGE COMPONENTS:

STEP 1: Remove knob nuts and internal/external tooth lock washers securing rear of recycling cover to mower deck. Remove cover. See Figure 14.

REMOVE KNOB

NUTS AND LOCK

WASHERS

FIGURE 14

STEP 2: Install desired discharge component / assembly.

A. SIDE DISCHARGE DEFLECTOR

Install deflector to deck in place of recycling cover, making sure that: 1) hole on outside front of deflector fits onto stud in front of discharge opening where front of recycling cover was originally installed, 2) slot on inside front of deflector slips under restraining nut on top of deck (under right front corner of engine), and 3) slot on inside rear of deflector slips onto stud behind rear of discharge opening, where rear of recycling cover was originally secured. See Figure 15. Install internal/external tooth lock washers and knob nuts on studs and tighten securely.

REAR SLOT

 

FRONT

OVER STUD ;

 

SLOT

INSTALL LOCK

 

UNDER NUT

WASHER AND

 

 

 

KNOB NUT

 

 

 

 

 

B. GRASS BAG

(Optional Accessory on Some Models)

1:Install grass bag adapter to the deck in place of recycling cover. See Figure 16. Refer to side discharge deflector installation instructions.

ROUTE RECOIL ROPE

AROUND PULLEY

SECURE

ADAPTER

TO DECK

FIGURE 16

1a: Attach Bag Adapter Standoff between rope guide pulley assembly and engine recoil. See Figure 16a.

A. Remove right rear bolt from engine recoil cover. B. Remove torx screw and nut securing rope guide pulley to bracket on bag adapter.

C. Lay standoff between bolt holes in engine recoil cover and bag adapter pulley bracket. NOTE: position standoff so that bent end is toward engine recoil cover.

D. Flip pulley over so that flange of steel bushing is under pulley. (The bushing will act as a washer between the pulley and standoff.)

E. Reassemble pulley to bag adapter, and install supplied replacement bolt, fitted with thread sleeve, into recoil cover. Tighten all hardware securely.

REPLACEMENT

 

 

 

STANDOFF

 

BOLT WITH

 

THREAD SLEEVE

 

 

 

 

 

 

 

 

ROPE GUIDE PULLEY

 

 

 

 

 

BEND

FRONT HOLE

OVER STUD ;

INSTALL LOCK

WASHER AND

KNOB NUT

FIGURE 15

FIGURE 16a

2:Route recoil rope around outside of rope guide pulley. (NOTE: Recoil rope may need to be slackened. Refer to “Handle Assembly”.)

5

Image 5
Contents Instruction No I.R /11/2006 TP 300-5113-IR-CW-N Handle AssemblyRemove Existing Hardware Step Operator Console and Ground speed handle Removed for clarity Drive AssemblyClutch Cable Vinyl Spring Cover Optional Accessory on Some Models Discharge AssemblyTo Change Discharge Components Side Discharge DeflectorFoam Blade Block Removal Page Lubrication Steel Deck Commercial Recycling Walk Mowers

Lawn Mower specifications

Snapper Lawn Mower is a well-regarded lawn care solution that has been trusted by homeowners and landscaping professionals alike for years. Known for its durability, performance, and innovative features, Snapper mowers stand out in a crowded market. One of the main attributes of Snapper mowers is their ease of use. Many models are designed with user-friendly controls, making them accessible to both novice and experienced operators. The intuitive design ensures comfortable handling, which is essential when tackling larger lawns.

A key feature of Snapper mowers is their powerful engine options. Equipped with reliable Briggs & Stratton or Kawasaki engines, these mowers deliver the power necessary to tackle thick, overgrown grass with ease. This ensures consistent performance and efficiency, allowing users to complete their lawn care tasks quickly. Energy efficiency is also a priority, and many Snapper models boast fuel-efficient engines that save on gas while still providing robust power.

Snapper lawn mowers come with several cutting technologies, including their signature pivoting deck design. This allows for exceptional maneuverability and ensures a clean cut even on uneven terrain. The ability to adjust cutting heights easily lets users customize their mowing experience according to their lawn’s specific needs, whether it's maintaining a neat trim or cutting taller grass.

Another notable feature is Snapper’s innovative mulching capability. Most models have a built-in mulching blade system that finely chops grass clippings, allowing them to be returned to the soil and acting as a natural fertilizer. This promotes a healthy lawn while reducing the need for bagging and disposal. Additionally, Snapper mowers are available in both self-propelled and push models, catering to a variety of preferences and lawn sizes.

Durability is a hallmark of the Snapper brand. Constructed with robust materials and reinforced components, Snapper mowers are designed to withstand the rigors of frequent use. Many models come with rust-resistant decks, ensuring longevity and a reliable lawn care solution for years to come.

Finally, the convenience of maintenance features, such as tool-less blade removal and easy access to the engine, underscores Snapper’s commitment to user-friendly design. Overall, Snapper Lawn Mowers combine performance, efficiency, and user-centric features, making them an excellent choice for anyone looking to maintain a well-manicured lawn with ease.