Snapper HZS18483BVE, HZS15423KVE, HZS15423KVE, HZS18483BVE Wheel Brake Adjustment

Page 18

Section 4 - ADJUSTMENTS & REPAIR

WARNING

DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug. Engine and components can be extremely hot. Avoid burns by allowing engine and components sufficient time to cool.

4.2.9. MOWER DECK ADJUSTMENT (LEVELNESS) (Continued From Previous Page)

2. Front to Rear Deck Pitch (42” Decks)

With the YARD CRUISER on a smooth, level surface, rotate blades until blade tips are at front and rear of deck. Measure the distance from blade tips to floor. The distance should be the same, or the rear 1/4” higher than the front. If the rear blade tip is lower or is more than 1/4” higher than the front, proceed with adjustment.

a.Remove rear hanger chains.

b.Turn each hanger pivot the same number of rotations on the eye-bolt to raise or lower the rear of the deck. See Figure 4.8.

c.Reinstall rear hanger chains and measure blade tips again.

d.Repeat steps “a” through “c” until proper levelness is obtained.

X

X + 1/4”

FRONT

REAR

ROTATE HANGER PIVOT:

UP TO RAISE DECK OR

DOWN TO LOWER DECK.

ADJUSTING

 

NUT

DO NOT ADJUST

TIMING

ROD

42” DECK SHOWN

FIGURE 4.9

4.2.11. WHEEL BRAKE ADJUSTMENT

Adjust the wheel brake if wheels turn when parking brake is engaged. Adjust the wheel brake by turning wheel brake adjusting nut clockwise to increase braking action or counter clockwise to decrease braking action. See Figure 4.10.

UNDERSIDE VIEW OF MACHINE

ADJUST COUNTER- CLOCKWISE TO DECREASE BRAKE

ADJUST

CLOCKWISE TO

INCREASE

BRAKE

WHEEL

ELECTRIC

CLUTCH

BRAKE ROD

 

FIGURE 4.10

FIGURE 4.8

4.2.10.MOWER DECK TIMING ROD - 42” DECKS The mower deck timing rod is preadjusted at the factory. It is set to maintain the deck in the same attitude through all heights of cut. If the timing rod requires adjustment, contact an authorized SNAPPER dealer for service. See Figure 4.9.

19

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Yard Cruiser Important Safety Instructions Operation Table of Contents Introduction Left Console ViewRight Console View NomenclatureOperating Instructions PRE-START Check ListStarting & Operation Engine Electric Start Wheel Drive Mower BladeStopping Parking BrakeCutting Height Adjustment Check Mower Blade Service After First 5 HoursChange Engine OIL Single Blade DeckService Every 25 Operating Hours 3.3.1. Engine Check Mower Drive Belt 1. Footrest RemovalMower Components 5. Mower Blade Spindle Lubrication Service Annually Storage OUT of SeasonBelt Replacement Engine Adjustments & RepairMower Drive Belt Adjustment Belt RemovalBlade Brake Hairpin Lift ARM Front or Rear View of Deck Twin Blade Deck Deck ShownWheel Brake Adjustment Mower Blade Replacement 4.3.1. Blade Wear Limits Blade ReplacementBlade Sharpening Battery Battery Removal Battery ServiceBattery Storage Battery Condition Chart Battery TestingBearing Replacement 48 Decks Troubleshooting Problem Probable Cause Corrective ActionMAINTENANCE/REPLACEMENT Parts Loss Of TractionService Performed Each USE HRS SeasonYear Limited Warranty Disclaimer of WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Service Notes Yard Cruiser Hydro Drive Series

HZS15423KVE, HZS18483BVE, HZS18483BVE, HZS15423KVE specifications

Snapper has long been a trusted name in outdoor power equipment, and their line of lawn mowers is no exception. Among their impressive offerings are the Snapper HZS18483BVE, HZS15423KVE, and HZS15423KVE models. Each of these mowers is designed to provide exceptional performance, durability, and ease of use, catering to the needs of homeowners and professional landscapers alike.

The Snapper HZS18483BVE is equipped with an 18-inch cutting deck, making it ideal for medium to large lawns. Its powerful, easy-start engine ensures that you can get to work promptly. The mower features a 3-in-1 cutting system, allowing for mulching, bagging, and side discharge capabilities. This versatility provides homeowners with the flexibility to manage grass clippings according to their own preferences.

One of the standout characteristics of the HZS18483BVE is its patented SureCut technology, which enables a superior cutting performance across various grass types and conditions. Additionally, its lightweight design and self-propulsion feature make it easy to maneuver and navigate around obstacles, allowing for a more efficient mowing experience.

The Snapper HZS15423KVE and HZS15423KVE models, while similar, offer their unique features aimed at different mowing needs. Both mowers come with a 21-inch cutting deck, perfect for larger areas, and feature the same reliable engine as the HZS18483BVE. The HZS15423KVE is designed with an adjustable cutting height, and smooth rolling wheels that ensure a clean cut every time.

Furthermore, these mowers feature a user-friendly starting system, making them accessible for users of all experience levels. The durable steel construction guarantees longevity, making them a wise investment for any lawn care enthusiast.

When it comes to maintenance, Snapper’s designs allow for easy access to key components, such as the air filter and spark plug, ensuring routine upkeep is hassle-free. These models are also equipped with high-capacity grass bags, enabling longer mowing sessions without frequent emptying.

In conclusion, the Snapper HZS18483BVE and HZS15423KVE models offer exceptional power, performance, and versatility. Their innovative technologies and robust characteristics set them apart in the crowded lawn mower market, providing users with reliable tools to maintain their lawns efficiently. Whether you have a small garden or an expansive yard, these Snapper mowers deliver cutting-edge solutions for any landscaping challenge.
Top Page Image Contents