Snapper HZS15423KVE, HZS18483BVE Starting & Operation Engine Electric Start

Page 7

Section 2 - OPERATING INSTRUCTIONS

IMPORTANT: This YARD CRUISER is equipped with hydrostatic drive. The forward, rearward and steering movement of the machine is controlled by a joystick lever. Joystick operations should be performed only from the operator’s position in the seat. A small movement of the joystick can cause the machine to move instantly. Move joystick very carefully and slowly.

1.Always move the joystick to the center position to “STOP” machine. IMPORTANT: To stop machine always return the joystick with hand assistance to the neutral position. Always engage parking brake when leaving operator’s seat.

2.Move the joystick forward to propel the machine forward.

3.Move the joystick rearward to propel the machine backward.

4.Move the joystick to the right to rotate the front of the machine in circular motion to the right, as in turning around to go in a different direction.

5.Move the joystick to the left to rotate the front of the machine in circular motion to the left, as in turning around to go in a different direction.

2.2STARTING & OPERATION

2.2.1. ENGINE (ELECTRIC START)

IMPORTANT: When the ignition key is turned to “START”, the engine will not turn over and willnot start unless the Parking Brake is engaged and the Blade Switch is in the “Off” position. The operator should be in the seat. Start engine as follows:

1.Move joystick lever to (N) Neutral position. See Figure 2.5.

2.Make certain the blade switch is in the “Off” position. See Figure 2.6.

3.Make certain the parking brake is engaged. See Figure 2.5.

4.Open vent on fuel filler cap by turning counterclockwise. IMPORTANT: Failure to open vent on the fuel filler cap can cause engine to stall. See Figure 2.3.

5.Turn fuel shut off valve to the open position. See Figure 2.3.

6.Move engine speed control to the choke position or pull choke control to choke position. See Figure 2.6.

7.Turn key to the “START” position until engine starts. See Figure 2.5. NOTE: If after 5 seconds of cranking the engine and it does not start, release the key. Attempt starting again after waiting for approximately 20 seconds.

8.After engine starts, move engine speed control to the “FAST” position or push choke control in to the “OFF” position, allow a brief warm-up until engine runs smooth.

WARNING

DO NOT leave machine with engine running. STOP engine. STOP blades. Engage park brake. Remove key. DO NOT park machine on slopes.

JOYSTICK IS IN NEUTRAL POSITION

RUN

POSITIONTURN KEY TO

START

POSITION

DECAL VIEWED FROM

OPERATOR’S POSITION

FIGURE 2.5

PARKING BRAKE

ENGAGED

PULL CHOKE CONTROL

OUT TO START ENGINE

MOVE ENGINE

SPEED CONTROL TO

FAST POSITION

PARKING BRAKE ENGAGED

MOVE ENGINE SPEED/CHOKE CONTROL TO CHOKE POSITION. AFTER WARMUP MOVE CONTROL AWAY FROM CHOKE POSITION TO (RABBIT) “FAST” POSITION.

CONTROL SHOWN

IN CHOKE POSITION

FIGURE 2.6

(Continued on Next Page)

8

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Yard Cruiser Important Safety Instructions Operation Table of Contents Nomenclature Left Console ViewRight Console View IntroductionPRE-START Check List Operating InstructionsStarting & Operation Engine Electric Start Parking Brake Mower BladeStopping Wheel DriveCutting Height Adjustment Single Blade Deck Service After First 5 HoursChange Engine OIL Check Mower BladeCheck Mower Drive Belt 1. Footrest Removal Service Every 25 Operating Hours 3.3.1. EngineMower Components 5. Mower Blade Spindle Lubrication Storage OUT of Season Service AnnuallyBelt Removal Engine Adjustments & RepairMower Drive Belt Adjustment Belt ReplacementBlade Brake Hairpin Lift ARM Deck Shown Front or Rear View of Deck Twin Blade DeckWheel Brake Adjustment Blade Replacement Mower Blade Replacement 4.3.1. Blade Wear LimitsBlade Sharpening Battery Service Battery Battery RemovalBattery Storage Battery Testing Battery Condition ChartBearing Replacement 48 Decks Problem Probable Cause Corrective Action TroubleshootingLoss Of Traction MAINTENANCE/REPLACEMENT PartsUSE HRS Season Service Performed EachDisclaimer of Warranty Year Limited WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Service Notes Yard Cruiser Hydro Drive Series

HZS15423KVE, HZS18483BVE, HZS18483BVE, HZS15423KVE specifications

Snapper has long been a trusted name in outdoor power equipment, and their line of lawn mowers is no exception. Among their impressive offerings are the Snapper HZS18483BVE, HZS15423KVE, and HZS15423KVE models. Each of these mowers is designed to provide exceptional performance, durability, and ease of use, catering to the needs of homeowners and professional landscapers alike.

The Snapper HZS18483BVE is equipped with an 18-inch cutting deck, making it ideal for medium to large lawns. Its powerful, easy-start engine ensures that you can get to work promptly. The mower features a 3-in-1 cutting system, allowing for mulching, bagging, and side discharge capabilities. This versatility provides homeowners with the flexibility to manage grass clippings according to their own preferences.

One of the standout characteristics of the HZS18483BVE is its patented SureCut technology, which enables a superior cutting performance across various grass types and conditions. Additionally, its lightweight design and self-propulsion feature make it easy to maneuver and navigate around obstacles, allowing for a more efficient mowing experience.

The Snapper HZS15423KVE and HZS15423KVE models, while similar, offer their unique features aimed at different mowing needs. Both mowers come with a 21-inch cutting deck, perfect for larger areas, and feature the same reliable engine as the HZS18483BVE. The HZS15423KVE is designed with an adjustable cutting height, and smooth rolling wheels that ensure a clean cut every time.

Furthermore, these mowers feature a user-friendly starting system, making them accessible for users of all experience levels. The durable steel construction guarantees longevity, making them a wise investment for any lawn care enthusiast.

When it comes to maintenance, Snapper’s designs allow for easy access to key components, such as the air filter and spark plug, ensuring routine upkeep is hassle-free. These models are also equipped with high-capacity grass bags, enabling longer mowing sessions without frequent emptying.

In conclusion, the Snapper HZS18483BVE and HZS15423KVE models offer exceptional power, performance, and versatility. Their innovative technologies and robust characteristics set them apart in the crowded lawn mower market, providing users with reliable tools to maintain their lawns efficiently. Whether you have a small garden or an expansive yard, these Snapper mowers deliver cutting-edge solutions for any landscaping challenge.
Top Page Image Contents