Snapper ELP21602, ELP2150KWV, ELP21602E Do not Sharpen Beyond Original Cutting Edge Blade

Page 12

Section 4 - REPAIR & ADJUSTMENTS

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Remove key. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Wear heavy leather gloves when handling or working around cutting blades. Blades are extremely sharp and can cause severe injury.

4.1MOWER BLADE REPLACEMENT 4.1.2. BLADE SHARPENING (Continued From Previous Page)

4. Sharpen blade on a grinding wheel at an angle of 22 to 28 degrees. DO NOT sharpen blade beyond original cutting edge. See Figure 4.3.

ORIGINAL CUTTING EDGE

*DO NOT SHARPEN

 

BEYOND ORIGINAL

 

CUTTING EDGE OF

 

BLADE

22º TO 28º

FIGURE 4.3

5.Check blade for balance. If necessary, correct balance by grinding heavy end of blade.

6.Reinstall blade. See Figures 4.2 & 4.3. Check torque of blade retaining cap screw. Recommended torque should be 40 ft. lbs.

4.2WHEEL DRIVE CONTROL ADJUSTMENT (Engine To Transmission Drive Belt)

The wheel drive control requires periodic adjustment to maintain proper engine to transmission drive belt tension. The adjustment is located on the right handle and requires no tools. See Figure 4.4.

IMPORTANT: DO NOT operate engine when inspecting or adjusting the drive belt.

1.Visually check engine drive belt for cracking, fraying, severed or belt strands exposed. Replace belt before operating mower.

2.To check for proper drive belt tension. STOP engine. Shift ground speed control to 1st and engage the wheel drive control.

3.With the wheel drive control engaged, pull the mower handles, moving the mower rearward. Observe the rear wheels.

4.If the rear wheels slide on the surface (no rotation) the belt is properly tensioned and the control does not require adjustment.

5.If the rear wheels rotate, increase belt tension by rotating the thumb screw COUNTER-CLOCKWISE.

6.Turn thumb screw one turn at a time and recheck tension (repeating steps 3-5).

7.When proper belt tension has been set, operate machine and verify proper wheel drive control function.

IMPORTANT: DO NOT over-tighten wheel drive control. DO NOT operate if control or drive does not function properly. Contact your local SNAPPER Dealer for assistance.

IMPORTANT: If machine creeps forward after wheel drive control is released the cable is too tight and must be readjusted to eliminate all forward movement. Machine must not have any forward movement when wheel drive control is disengaged. If the wheel drive control fails to return quickly to the “OFF” position when released, check for a broken, binding, or kinked cable.

WHEEL DRIVE

CONTROL

HOLD BLADE

CONTROL AGAINST

HANDLEBAR AND

ENGAGE WHEEL

DRIVE CONTROL

THUMBWHEEL

ADJUSTER

FIGURE 4.4

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents European 21 Cast Aluminum Deck Walk Mowers Series Protection for Children Slope OperationPreparation Maintenance and Storage OperationTable of Contents Familiarization IntroductionNomenclature Operating Instructions PRE-START Check ListStarting & Operation 2.2.1. Engine & Blade Primer Models Recoil StartHandle Height Adjustment Engine & BladeChoke Models Recoil Start Propelling MowerCutting Height Adjustment Installation of Grass CatcherRecycling Operation Maintenance Service After First 5 Hours 3.2.1. Change Engine OILGrease Level in Transmission Wheel Drive ControlService Annually Storage ProcedureCheck Mower Blade Check Engine to Transmission Drive BeltRepair & Adjustments Mower Blade Replacement 4.1.1. Standard Blade Wear LimitBlade Sharpening On NextDo not Sharpen Beyond Original Cutting Edge Blade Belt Service Engine To Transmission Belt ReplacementAdjustments & Repair Battery Battery RemovalBattery Installation Battery ServiceBattery Testing NEW Battery PreparationState of Charge Digital Voltmeter Problem Probable Cause Corrective Action Using Recoil StarterStart Using Engine Will NotService Performed Each Clean Sponge Element Engine Manual100 USE HRS SeasonDecal Identification Forward Motion Chute Deflector Decal P/N AIR Filter Symbol Year Limited Warranty Disclaimer of WarrantyEuropean Cast Aluminum Deck Walk Mowers Series

ELP21602E, ELP21502KWV, ELP21602, ELP21502KWV, ELP21602, ELP21602E, ELP21602, ELP2150KWV, ELP21602E specifications

Snapper is known for producing high-quality lawn care equipment, and their models ELP21602E, ELP21502KWV, ELP21602, and ELP21502KWV are no exceptions. These electric lawn mowers combine innovative technology with user-friendly features designed to make lawn maintenance efficient and enjoyable.

The Snapper ELP21602E is equipped with a powerful electric motor that delivers reliable performance without the hassle of gas. Its brushless technology ensures a longer lifespan and quieter operation, enabling users to mow their lawns with minimal noise disruption. The model boasts a 21-inch cutting deck, providing a wide cutting path for a quicker mowing experience. The cutting height is adjustable, allowing users to customize their lawn’s appearance based on personal preference or seasonal requirements.

Similar to the ELP21602E, the ELP21502KWV is designed with convenience in mind. It features an ergonomic handle that offers multiple height adjustments for user comfort during extended use. The lightweight design makes it easy to maneuver around obstacles, ensuring that users can achieve a well-manicured lawn with ease.

The ELP21602 continues the trend of innovation with its lithium-ion battery technology. This model provides a powerful alternative for those seeking an eco-friendly mowing solution. The battery offers long run times that allow users to cover larger lawns without interruptions. Furthermore, the intelligent battery management system optimizes performance and prolongs battery life, ensuring reliability for several mowing seasons.

All models feature Snapper’s signature mulching capabilities, allowing users to finely chop grass clippings and distribute them back onto the lawn. This feature not only promotes a healthier lawn but also reduces the need for bagging clippings, saving time and effort. Additionally, the user can easily switch between mulching and bagging with a simple adjustment.

Safety is a paramount consideration in all Snapper products. These mowers come equipped with safety features like a blade brake that stops the blade immediately when the user releases the handle, preventing accidental injuries.

In conclusion, the Snapper ELP21602E, ELP21502KWV, ELP21602, and ELP21502KWV represent a blend of power, efficiency, and eco-friendly technology. Whether you prefer electric or battery-operated models, Snapper offers solutions tailored to meet diverse lawn care needs while ensuring user comfort and safety. With robust features and cutting-edge technology, these mowers are smart investments for any homeowner looking to maintain a pristine lawn.
Top Page Image Contents