Snapper CZT19480KWV, CZT19481KWV, HZT21480BV, HZT21481BV Battery Battery Removal

Page 25

Section 5 - ADJUSTMENTS & REPAIR

WARNING

Shield the positive terminal with terminal cover located on battery harness. This prevents metal from touching the positive terminal, which could cause sparks. Cables must be connected to battery terminals in the proper position. RED (Positive) cable must go to the ( + ) terminal. BLACK (Negative) cable must go to the ( - ) terminal. If battery is removed, DO NOT operate engine without insulating Positive + battery cable terminal with electrical tape, or sparking from the battery cables can result.

5.10BATTERY

5.10.1.BATTERY REMOVAL

1.Remove battery retainer. See Figure 5.17.

2.Slide terminal cover away from positive terminal.

3.Observe and note cable positions on battery. Disconnect cables from battery terminals, disconnecting BLACK (Negative) cable first and RED (Positive) last. Retain mounting bolts and nuts. See Figure 5.17.

REMOVE

BATTERY

RETAINER

DATE

FIGURE 5.17

5.10.2.BATTERY INSTALLATION

1.Position battery into battery compartment.

2.Connect cables to battery terminals. Connect RED (Positive) cable first. Connect BLACK (Negative) cable last. See Figure 5.18.

3.Reinstall battery retainer and positive terminal cover. See Figure 5.17.

BLACK (NEGATIVE)

RED (POSITIVE) CABLE

CABLE

 

WHEN DISCONNECTING

TERMINAL COVER MUST

CABLES, DISCONNECT

SHIELD POSITIVE

NEGATIVE FIRST

TERMINAL AFTER

 

INSTALLATION

FIGURE 5.18

5.10.3.BATTERY CHARGING

NOTE: The battery in this machine is maintenance-free. It has been filled to the proper level with acid and is sealed. Do not attempt to open battery.

1.Remove battery.

2.Place battery in a well-ventilated area on a level, non-concrete surface.

3.Connect battery charger to battery terminals. RED to positive (+) terminal and BLACK to negative (-) terminal.

4.Slow charge battery at 6-10 amps for 1 hour.

5.If battery will not accept charge or is partially charged after 1 hour of charging, replace with new battery.

WARNING

Keep all sparks, flame and fire away from area when charging battery.

25

Image 25
Contents Model Number Explanation MID-MOUNT Zero Turning Hydro Drive SeriesProtection Against Tipovers Protection for ChildrenPreparation From Previous ColumnOperation Safe Handling of GasolineTowing MaintenanceTable of Contents Differ from your specific model. Contact Are provided for reference only and mayYour Snapper dealer if you have questions IntroductionSafety Messages and Symbols RUN PRE-START Check List Operating InstructionsRotate Relief Valve Counterclockwise To Relieve Pressure Starting Mower Blades Stopping EngineStopping Mower Blades Parking BrakeOPERATION- Motion Controls Cutting Height AdjustmentDriving Machine Engine Must not Start if Stopping MachineEngine should Start if Engine Must Begin to Stop ifCheck Mower Blade Service After First 5 HoursAfter Every 25 Operating Hours 4.3.1. Engine Before Operating Machine Riding Mower LubricationAnnually END of Each Season Deck Removal Remove Inside Nuts That Secures Chain to Rear Lift ARM Neutral Position Adjustments Adjustments & RepairMower Deck & Component Adjustments Neutral Position Adjustments From PreviousParking Brake Adjustment Tracking Adjustment Traction Belt ReplacementTraction Belt Tension Belt Adjustment Belt ReplacementMower Drive Belt Replacement and Adjustment Belt RemovalBlade Sharpening Battery Installation Battery Battery RemovalBattery Charging NEW Battery Preparation 1.Remove battery from carton Battery TestingState of Charge Digital Voltmeter Hydraulic SYSTEM, Purging Trouble Shooting on Next Problem Probable CauseCorrective Action Machine Will Not Move Service Performed Each MAINTENANCE/REPLACEMENT PartsMAINTENANCE/REPLACEMENT Parts 100Disclaimer of Warranty Year Limited Warranty CZT UnitsYear Limited Warranty HZT Units Primary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Snapper Product Registration Form Page Page MID-MOUNT Zero Turning Hydro Drive Series

HZT21480BV, CZT19480KWV, CZT19480KWV, CZT19481KWV, HZT21480BV, HZT21481BV specifications

The Snapper CZT19480KWV, CZT19481KWV, HZT21480BV, HZT21481BV, and HZT21480BV represent a lineup of advanced zero-turn lawn mowers designed for both residential and commercial users. These models are renowned for their robust performance, user-friendly features, and technological innovations that enhance mowing efficiency and comfort.

One of the standout features of these Snapper models is their powerful engine options. The CZT19480KWV and CZT19481KWV are equipped with dependable Kawasaki engines, delivering exceptional torque and speed for tackling dense grass with ease. Similarly, the HZT21480BV and HZT21481BV models are powered by reliable Briggs & Stratton engines, ensuring consistent performance under various mowing conditions.

The zero-turn capability is a defining characteristic of these mowers, allowing for unparalleled maneuverability. This feature enables operators to navigate tight spaces and obstacles with minimal effort, resulting in a pristine cut and reduced mowing time. The precision steering controls enhance the operator's ability to make sharp turns while maintaining a consistent cutting height.

Comfort is prioritized in the design of these models. The mowers come with ergonomic seating, providing substantial back support for extended mowing sessions. Additionally, the adjustable steering levers allow users to customize their driving position, contributing to a comfortable and efficient mowing experience.

In terms of cutting performance, the Snapper models boast high-quality cutting decks, ranging from 48 to 52 inches, made of durable steel. The decks are engineered for a clean cut and can efficiently handle various grass types and heights. The mowing height is easily adjustable, offering multiple settings to accommodate different lawn conditions.

Technologically, these mowers incorporate advanced features like an intuitive control panel, easy-start ignition systems, and optional accessories, such as mulching kits and baggers, providing versatility for lawn care needs. Furthermore, the Snapper Quick Turn technology enhances the overall efficiency, cutting down the time spent mowing while ensuring even grass distribution.

In summary, the Snapper CZT19480KWV, CZT19481KWV, HZT21480BV, HZT21481BV, and HZT21480BV combine power, precision, and comfort, making them ideal choices for users seeking reliable and efficient zero-turn mowers. Whether for residential lawns or commercial landscaping, these models offer the performance and features that meet the demands of any mowing task.