Snapper CZT19480KWV, CZT19481KWV, HZT21480BV, HZT21481BV Machine Will Not Move

Page 29

TROUBLESHOOTING

PROBLEM

 

PROBABLE CAUSE

Machine Will Not Move

1.

Motion Control Levers in the neutral “N” position.

Loss Of Traction

2.

Hydro. Pumps in roll release setting.

3.Low transmission hydraulic oil level.

4.Parking Brake engaged.

5.Traction drive belt requires replacement.

Blade(s) Not Cutting 1. Blade engagement switch in the “OFF” position.

2.Mower belt slipping.

3.Electric clutch not functioning.

Cutting Grass 1. Uneven tire pressure.

Improperly

2. Cutting height too low or high.

 

3.

Engine speed too slow.

 

4.

Forward speed too fast.

 

5.

Terraced cut, side to side.

 

6.

Excessive deck pitch, front to rear.

 

7.

Cutting blade(s) dull or damaged.

 

8.

Blade belt slipping.

 

9.

Check electric clutch.

 

10. Check gearbox for damage.

Poor Grass Discharge

1. Engine speed too slow.

 

2.

Forward speed too fast.

 

3.

Grass is wet.

 

4.

Excessively worn or damaged blade(s).

 

5.

Build up of grass clippings and debris under deck.

 

6.

Improper blade(s) installed on deck.

 

7.

Blade(s) installed improperly on deck.

Battery Will Not Charge

1. Poor cable connections.

 

2.

Bad battery cell(s).

 

3.

Faulty alternator.

CORRECTIVE ACTION

1.Move Motion Controls to desired speed

2.Tighten relief valves.

3.Bring hydraulic oil to proper level.

4.Move parking brake to disengaged position.

5.Replace traction drive belt.

1.Move blade switch to the “ON” position.

2.Adjust or replace mower belt.

3.Contact authorized SNAPPER dealer.

1.Bring to proper pressure.

2.Adjust cutting height.

3.Move throttle control to “FAST” position.

4.Move joystick to a slower speed.

5.Adjust side to side level.

6.Adjust front to rear level.

7.Sharpen cutting edges or replace blade(s).

8.Adjust or replace blade belt.

9.Adjust to proper specifications.

10.Contact authorized SNAPPER dealer.

1.Move throttle control to “FAST” position.

2.Move joystick to a slower speed.

3.Mow when grass is dry.

4.Service mower blade(s).

5.Clean deck.

6.Install proper SNAPPER blades.

7.Install blades properly.

1.Clean cables and battery terminals.

2.Replace with new battery.

3.Contact engine manufacturer’s dealer.

29

Image 29
Contents Model Number Explanation MID-MOUNT Zero Turning Hydro Drive SeriesProtection Against Tipovers Protection for ChildrenPreparation From Previous ColumnOperation Safe Handling of GasolineTowing MaintenanceTable of Contents Differ from your specific model. Contact Are provided for reference only and mayYour Snapper dealer if you have questions IntroductionSafety Messages and Symbols RUN PRE-START Check List Operating InstructionsRotate Relief Valve Counterclockwise To Relieve Pressure Starting Mower Blades Stopping EngineStopping Mower Blades Parking BrakeDriving Machine Cutting Height AdjustmentOPERATION- Motion Controls Engine Must not Start if Stopping MachineEngine should Start if Engine Must Begin to Stop ifCheck Mower Blade Service After First 5 HoursAfter Every 25 Operating Hours 4.3.1. Engine Annually END of Each Season Riding Mower LubricationBefore Operating Machine Deck Removal Remove Inside Nuts That Secures Chain to Rear Lift ARM Neutral Position Adjustments Adjustments & RepairMower Deck & Component Adjustments Neutral Position Adjustments From PreviousParking Brake Adjustment Traction Belt Tension Traction Belt ReplacementTracking Adjustment Belt Adjustment Belt ReplacementMower Drive Belt Replacement and Adjustment Belt RemovalBlade Sharpening Battery Charging Battery Battery RemovalBattery Installation State of Charge Digital Voltmeter Battery TestingNEW Battery Preparation 1.Remove battery from carton Hydraulic SYSTEM, Purging Corrective Action Problem Probable CauseTrouble Shooting on Next Machine Will Not Move Service Performed Each MAINTENANCE/REPLACEMENT PartsMAINTENANCE/REPLACEMENT Parts 100Disclaimer of Warranty Year Limited Warranty CZT UnitsYear Limited Warranty HZT Units Primary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Snapper Product Registration Form Page Page MID-MOUNT Zero Turning Hydro Drive Series

HZT21480BV, CZT19480KWV, CZT19480KWV, CZT19481KWV, HZT21480BV, HZT21481BV specifications

The Snapper CZT19480KWV, CZT19481KWV, HZT21480BV, HZT21481BV, and HZT21480BV represent a lineup of advanced zero-turn lawn mowers designed for both residential and commercial users. These models are renowned for their robust performance, user-friendly features, and technological innovations that enhance mowing efficiency and comfort.

One of the standout features of these Snapper models is their powerful engine options. The CZT19480KWV and CZT19481KWV are equipped with dependable Kawasaki engines, delivering exceptional torque and speed for tackling dense grass with ease. Similarly, the HZT21480BV and HZT21481BV models are powered by reliable Briggs & Stratton engines, ensuring consistent performance under various mowing conditions.

The zero-turn capability is a defining characteristic of these mowers, allowing for unparalleled maneuverability. This feature enables operators to navigate tight spaces and obstacles with minimal effort, resulting in a pristine cut and reduced mowing time. The precision steering controls enhance the operator's ability to make sharp turns while maintaining a consistent cutting height.

Comfort is prioritized in the design of these models. The mowers come with ergonomic seating, providing substantial back support for extended mowing sessions. Additionally, the adjustable steering levers allow users to customize their driving position, contributing to a comfortable and efficient mowing experience.

In terms of cutting performance, the Snapper models boast high-quality cutting decks, ranging from 48 to 52 inches, made of durable steel. The decks are engineered for a clean cut and can efficiently handle various grass types and heights. The mowing height is easily adjustable, offering multiple settings to accommodate different lawn conditions.

Technologically, these mowers incorporate advanced features like an intuitive control panel, easy-start ignition systems, and optional accessories, such as mulching kits and baggers, providing versatility for lawn care needs. Furthermore, the Snapper Quick Turn technology enhances the overall efficiency, cutting down the time spent mowing while ensuring even grass distribution.

In summary, the Snapper CZT19480KWV, CZT19481KWV, HZT21480BV, HZT21481BV, and HZT21480BV combine power, precision, and comfort, making them ideal choices for users seeking reliable and efficient zero-turn mowers. Whether for residential lawns or commercial landscaping, these models offer the performance and features that meet the demands of any mowing task.