Snapper 7800786 Operation, Stopping Engine Wheel Drive, Blade, Figu 15 St ppi g the mower blade

Page 14

Operation

!

WARNING

!

DO NOT leave the machine with the engine running. STOP Blade. STOP engine. Shift to neutral and engage park brake. Remove key.

Mower Blade

1.Stop the mower blade by releasing the blade pedals (A, Figure 15) or moving the blade lever (B) rearward to the “OFF” position.

B

Stopping - Engine,

Wheel Drive, Blade

Engine

1.Stop the engine by turning the key (A, Figure 13) to the “OFF” position.

A

Figu 15: St ppi g the mower blade

A

 

 

 

 

!

WARNING

!

 

 

 

 

Once blade is disengaged, it should come to a complete

 

 

 

 

stop in 3 seconds or less. If the blade continues to rotate

 

Figure 13: Turning key to ‘Off’

 

 

after 3 seconds, the blade brake must be adjusted. Refer to

 

 

 

 

Section “BLADE BRAKE ADJUSTMENT” for adjustment

 

Wheel Drive

 

 

proce

ures or return machine to an authorized dealer for

 

 

adjustment. DO NOT CONTINUE to operate machine until

1. Stop motion of the Rear Engine Rider by pushing the

blade brake is adjusted and functioning properly.

 

 

clutch/brake pedal (A, Figure 14) all the way down to

 

 

 

 

 

 

 

 

 

apply the brake.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A

 

 

 

 

 

 

Reproduction

 

 

 

 

 

 

 

 

Figure 14: Engaging the clutch/brake pedal

14

www.snapper.com

Image 14
Contents Not For Manual No Rev. ‘-’Equipment EngineTable of Contents Preparation Operator SafetyProtection for Children Protection against Tipovers From Previous ColumnProtection against Tipovers Operation Safe Handling of GasolineTowing Maintenance Decal Identification Remove Battery Before StartingHeight of Cut Safety Panel Parking Brake Battery WarningReverse Lockout Features and Controls Park Brake Latch Fuel TankOperation Before Starting To avoid damaging the emissions systemCarefully Make certain the Blade Lever A, is OFF position Operation Starting and OperationEngine Electric Start Start, release the key, make sure the Clutch/Brake Pedal isHousing. Never allow rope to snap back Engine Manual StartReproduction Figu Engagi g the clutch/brake pedal Mower BladeWheel Drive Figu 15 St ppi g the mower blade OperationStopping Engine Wheel Drive, Blade ProceStopping Engine, Wheel Drive Cutting Height AdjustmentRe 18 Cutting height adjustment BladeAte blades in reverse. Stop BLADES, Look and see Reverse Lockout MechanismReverse Lockout Mechanism Override While backingMaintenance Maintenance Chart Tractor and Mower EngineCheck Mower Blade MaintenanceService Engine Air Cleaner Change Engine OilBlade Brake Service Brake / Park BrakeCheck the Blade Drive Belt Reverse Lockout Mechanism Safety Interlock System ChecksCheck Engine Lubrication Grease FittingsFront Wheel Bearing Lubrication Clean Mower Deck Mower Deck Linkage LubricationMower Deck Levelness Mower Blade Spindle LubricationInspect for lubricant on the internal parts Additional engine serviceRear Axle Bearing Lubrication Replace with a new plugRepro Duction Avoi Damaging the emissions system Storage Out of SeasonFuel Filter Automatic Blade Brake should stop the blades wi hin Engine Adjustments and RepairBlade Brake Adjustment Re 31 Measuring blade brake clearanceMower Deck Adjustment Side-To-Side Levelness Mower Deck Adjustment Front-to-Rear LevelnessRemove the mower drive belt cover. Refer to the sec Mower Drive Belt AdjustmentEs ot have slack adjustment Tion entitled Check Mower Drive BeltRear Engine Rider Drive Components Service Brake / Park Brake AdjustmentBottom of the housing Measurement should be 3/4Mower Blade Replacement Blade Wear LimitsBelt Removal Mower Drive Belt ReplacementBelt Replacement Ut ng f 30 inch decksBattery Installation BatteryBattery Removal Fig re 49 Battery connectionsCharge the battery. Refer to the section entitled Battery ChargingBattery Storage Troubleshooting Adjust side to side level Move lever to the on positionWarranty Warranty PeriodSlope Guide 2811524BV 2812524BVE 3014524BVE 3317524BVE Common Service PartsPower Rating

7800787, 7800786, 7800784, 7800785 specifications

The Snapper 7800 series, which includes models 7800787, 7800784, 7800785, and 7800786, represents a remarkable advancement in lawn care technology and design. These mowers are engineered for efficiency, durability, and ease of use, making them popular among both residential and commercial users.

One standout feature across the Snapper 7800 series is the powerful Briggs & Stratton engine. This reliable engine is designed for optimal performance, enabling users to tackle even the toughest mowing tasks. With a range of horsepower options, each model provides ample power to handle various grass lengths and terrains, ensuring a clean and consistent cut every time.

The cutting deck on these models is another highlight. Snapper has integrated a robust, high-quality steel deck that not only promises longevity but also aids in superior grass handling. With a cutting width that varies by model, users can choose the size that best fits their lawn's dimensions. Additionally, the adjustable cutting height allows for customization, enabling users to achieve the perfect lawn finish.

Snapper's innovative engineering extends to its ergonomic design. The handles on the 7800 series are designed for comfort and usability, featuring easy-to-grip materials and adjustable heights to accommodate users of all sizes. This attention to user comfort reduces fatigue, ensuring that lawn maintenance can be completed efficiently.

Another impressive aspect is Snapper's commitment to technology. Some models in the 7800 series feature advanced self-propelling systems, allowing for effortless maneuvering over uneven terrain. The ease of use doesn’t stop there; these mowers come with a simple pull-start mechanism, and some models even offer an electric start option for added convenience.

In terms of maintenance, the Snapper 7800 series is designed to be user-friendly. The easy-access design makes routine maintenance tasks, such as oil changes and air filter replacements, straightforward. This emphasis on straightforward upkeep helps ensure that the mower can operate at peak efficiency throughout its lifespan.

In conclusion, Snapper's 7800787, 7800784, 7800785, and 7800786 models collectively embody the future of lawn care technology. Their powerful engines, durable construction, ergonomic designs, and user-friendly features make them exceptional choices for anyone looking to maintain a pristine lawn. These mowers not only offer efficiency but also deliver results that homeowners and professionals alike can take pride in. Whether for residential use or commercial landscaping, the Snapper 7800 series stands out as a top-tier option in the mowing market.