Snapper 7800787, 7800785, 7800784, 7800786 manual Storage Out of Season, Fuel Filter

Page 23
DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. STOP engine. STOP blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before working on machine. Fuel Filler Cap must be closed securely to prevent fuel spillage.
Engine
!

Maintenance

WARNING !

In addition to regular maintenance, the following components of the Rear Engine Rider should be carefully inspected regularly for wear or damage.

1.All bushings and pivot areas.

2.Check both front wheel king pins.

3.Transmission shift lever and detent.

4.Clutch disc.

5.Clutch yoke.

6.Mower deck linkage and pivot areas.

Replace worn or damaged parts. Use only factory authorized replacement parts or like parts when making repairs.

Perform all maintenance as specified in the Maintenance

Storage (Out of Season)

Chart in this manual.

If desired, the Rear Engine Rider can be stored on the rear

 

Fuel Filter

bumper. Perform the following procedures to insure the Rear

 

Engine Rider will operate properly when taken out of storage.

IMPORTANT: Service the fuel filter on a COLD ENGINE

1.

Thoroughly clean the Rear Engine Rider by removing all

ONLY!

 

 

 

 

grass clippings and debris.

1.

Drain the fuel from the fuel tank.

 

 

 

2. Perform maintenance and lubrication as required.

 

3.

D ain the fuel from the fuel tank.

2.

Start the engine and allow it to run until the engine runs

4.

Sta t the engine a d allow it to run until the engine runs

 

 

out of fuel.

 

 

 

 

ut of fuel. Th s all ws the carburetor and fuel system

3.

Remove the hose clamps (B, Figure 30) from the uel

 

 

 

to rema n clean during storage.

 

 

filter (A).

 

5.

Remove and s ore the battery. Refer to the Section

4.

Remove the fuel lines from the filter. Discard he fil er.

 

 

 

entitled “BATTERY STORAGE”.

5.

Install a new fuel filter.

 

6.

Caref

lly stand the Rear Engine Rider on its rear bumper

6.

Carefully reinstall the fuel clamps.

 

 

 

 

in the desired location for storage.

7.

Check the fuel system for leaks.

Repro

 

duction

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

C

 

 

 

 

IMPORTANT

 

 

 

 

 

 

 

T

avoi

damaging the emissions system:

 

 

 

B

 

 

 

• Do not overfill the fuel tank. Stop filling the tank when

 

 

 

 

 

 

fuel collects in the filler neck.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Empty the fuel tank before standing the machine on its

 

 

 

 

 

 

 

rear bumper.

 

 

 

 

A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 30: Replacing the fuel filter

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Manual No Rev. ‘-’ Not ForEngine EquipmentTable of Contents From Previous Column Operator SafetyProtection for Children Protection against Tipovers PreparationSafe Handling of Gasoline Protection against Tipovers OperationTowing Maintenance Decal Identification Remove Battery Before StartingHeight of Cut Safety Panel Parking Brake Battery WarningReverse Lockout Park Brake Latch Fuel Tank Features and ControlsTo avoid damaging the emissions system Operation Before StartingStart, release the key, make sure the Clutch/Brake Pedal is Operation Starting and OperationEngine Electric Start Carefully Make certain the Blade Lever A, is OFF positionEngine Manual Start Housing. Never allow rope to snap backReproduction Figu Engagi g the clutch/brake pedal Mower BladeWheel Drive Proce OperationStopping Engine Wheel Drive, Blade Figu 15 St ppi g the mower bladeBlade Cutting Height AdjustmentRe 18 Cutting height adjustment Stopping Engine, Wheel DriveWhile backing Reverse Lockout MechanismReverse Lockout Mechanism Override Ate blades in reverse. Stop BLADES, Look and seeTractor and Mower Engine Maintenance Maintenance ChartChange Engine Oil MaintenanceService Engine Air Cleaner Check Mower BladeBlade Brake Service Brake / Park BrakeCheck the Blade Drive Belt Lubrication Grease Fittings Safety Interlock System ChecksCheck Engine Reverse Lockout MechanismMower Blade Spindle Lubrication Clean Mower Deck Mower Deck Linkage LubricationMower Deck Levelness Front Wheel Bearing LubricationReplace with a new plug Additional engine serviceRear Axle Bearing Lubrication Inspect for lubricant on the internal partsRepro Duction Avoi Damaging the emissions system Storage Out of SeasonFuel Filter Re 31 Measuring blade brake clearance Engine Adjustments and RepairBlade Brake Adjustment Automatic Blade Brake should stop the blades wi hinMower Deck Adjustment Front-to-Rear Levelness Mower Deck Adjustment Side-To-Side LevelnessTion entitled Check Mower Drive Belt Mower Drive Belt AdjustmentEs ot have slack adjustment Remove the mower drive belt cover. Refer to the secMeasurement should be 3/4 Service Brake / Park Brake AdjustmentBottom of the housing Rear Engine Rider Drive ComponentsBlade Wear Limits Mower Blade ReplacementUt ng f 30 inch decks Mower Drive Belt ReplacementBelt Replacement Belt RemovalFig re 49 Battery connections BatteryBattery Removal Battery InstallationCharge the battery. Refer to the section entitled Battery ChargingBattery Storage Troubleshooting Move lever to the on position Adjust side to side levelWarranty Period WarrantySlope Guide 2811524BV 2812524BVE 3014524BVE 3317524BVE Common Service PartsPower Rating

7800787, 7800786, 7800784, 7800785 specifications

The Snapper 7800 series, which includes models 7800787, 7800784, 7800785, and 7800786, represents a remarkable advancement in lawn care technology and design. These mowers are engineered for efficiency, durability, and ease of use, making them popular among both residential and commercial users.

One standout feature across the Snapper 7800 series is the powerful Briggs & Stratton engine. This reliable engine is designed for optimal performance, enabling users to tackle even the toughest mowing tasks. With a range of horsepower options, each model provides ample power to handle various grass lengths and terrains, ensuring a clean and consistent cut every time.

The cutting deck on these models is another highlight. Snapper has integrated a robust, high-quality steel deck that not only promises longevity but also aids in superior grass handling. With a cutting width that varies by model, users can choose the size that best fits their lawn's dimensions. Additionally, the adjustable cutting height allows for customization, enabling users to achieve the perfect lawn finish.

Snapper's innovative engineering extends to its ergonomic design. The handles on the 7800 series are designed for comfort and usability, featuring easy-to-grip materials and adjustable heights to accommodate users of all sizes. This attention to user comfort reduces fatigue, ensuring that lawn maintenance can be completed efficiently.

Another impressive aspect is Snapper's commitment to technology. Some models in the 7800 series feature advanced self-propelling systems, allowing for effortless maneuvering over uneven terrain. The ease of use doesn’t stop there; these mowers come with a simple pull-start mechanism, and some models even offer an electric start option for added convenience.

In terms of maintenance, the Snapper 7800 series is designed to be user-friendly. The easy-access design makes routine maintenance tasks, such as oil changes and air filter replacements, straightforward. This emphasis on straightforward upkeep helps ensure that the mower can operate at peak efficiency throughout its lifespan.

In conclusion, Snapper's 7800787, 7800784, 7800785, and 7800786 models collectively embody the future of lawn care technology. Their powerful engines, durable construction, ergonomic designs, and user-friendly features make them exceptional choices for anyone looking to maintain a pristine lawn. These mowers not only offer efficiency but also deliver results that homeowners and professionals alike can take pride in. Whether for residential use or commercial landscaping, the Snapper 7800 series stands out as a top-tier option in the mowing market.
Top Page Image Contents