Adjustments
Figure 28. Leveling The Mower Side-to-Side
A.Nut
B.Eccentric Nut
C.Rear Rollers
*2399
Front-To-Back Leveling
1.Make sure mower is level
2.Position blade(s)
On 30” mower, the front tip should be level to 1/8” (3 mm) higher than rear tip.
On 34” mower, the front tips should be 1/4” (6 mm) higher than the rear tips.
3.See Figure 29. Loosen jam nut (E). To lower rear of mower deck, loosen nut (B) which will lengthen level- ing rod (D). To raise rear of deck, shorten leveling rod
(D). When proper measurement is obtained, tighten nut (A) against bracket, then tighten jam nut (E) against nut (A).
*2397
Figure 29. Front-To-Back Levelling
A. Adjustment Nut | D. Levelling Rod |
B. Rear Nut | E. Jam Nut |
C. Bracket |
|
26