Snapper 400 / 2400 manual Engine, Transmission, Chassis, Dimensions

Specifications

NOTE: Specifications are correct at time of printing and are subject to change without notice.

ENGINE

13 HP Intek OHV — Briggs & Stratton

Horsepower	13 HP @ 3400 rpm
Displacement	21	Cu. In. (344 cc)
Electrical	12	Volt, 3 Amp D.C. Battery 230 CCA
Air Cleaner	Pre-Cleaned Air to Paper Filter
Oil Capacity	3 Pints (1.42 L)

16 HP Command™ — Kohler

Horsepower	16 HP @ 3400 rpm
Displacement	27.9 Cu. In. (460 cc)
Electrical	12 Volt, 15 Amp Alternator Battery: 230 CCA
Oil Capacity	4 Pints (1.9 L)

TRANSMISSION

Hydro Models

TypeHydrostatic

Lubrication Transmission is a Sealed Unit

Ground Speeds Infinite Forward: 0-5.2 MPH (0-8.4 km/h) Reverse: 0-2.3 MPH (0-3.7 km/h)

CHASSIS

Front Wheels Tire Size 13 x 5.00-6

Pneumatic Inflation Pressure 10 -12 psi (,68 - ,82 bar)

Rear Wheels Tire Size 16 x 6.50-8

Pneumatic Inflation Pressure 10 -12 psi (,68 - ,82 bar)

Fuel Tank Material: Non-Corrosive Polyethylene Capacity: 2 Gallons (7.5 L)

Turning Radius Inside Rear Tire 12 In. (30.2 cm)

DIMENSIONS

Overall Length	61 In. (155 cm)
Overall Width
- w/30 mower		38.5 In. (97.8 cm)
- w/34 mower		45.5 In. (115.6 cm)
- at rear wheels		33	In. (83.8 cm)
Height at
- steering wheel		41	In. (104.1 cm)
- seat back		35	In. (88.9 cm)
- engine cover		28	In. (71.1 cm)
Wheel Base		43	In. (109.2 cm)
Weight (appx.)
- 13 HP w/34”mower		Net: 405 lbs. (183 kg)
- 16 HP w/34”mower		Net: 405 lbs. (183 kg)

29