Snapper 355Z manual Identification Tags North American Models, Operational Safety Checks

Page 11

Identification Tags

North American

Models

When contacting your authorized dealer for replacement parts, service, or information you MUST have these numbers.

Record your model name/number, manufacturer’s identification numbers, and engine serial numbers in the space provided on the inside front cover for easy access. These numbers can be found in the locations shown.

NOTE: For location of engine identification numbers, refer to the engine owner’s manual.

Unit ID Tag

SAFETY INTERLOCK SYSTEM

This unit is equipped with safety interlock switches. These safety systems are present for your safety, do not attempt to bypass safety switches, and never tamper with safety devices. Check their operation regularly.

Operational SAFETY Checks

Test 1 — Engine should NOT crank if:

•PTO switch is engaged, OR

•Parking brake is not engaged, OR

•Ground Speed / Steering Control Levers are not in the NEUTRAL position.

Test 2 — Engine SHOULD crank and start if:

•PTO switch is NOT engaged, AND

•Parking brake is engaged, AND

•Ground Speed / Steering Control Levers are locked in the NEUTRAL position.

Test 3 — Engine should SHUT OFF if:

•Operator rises off seat with PTO engaged, OR

•Operator rises off seat with parking brake disengaged.

•Operator moves ground speed / steering control levers out of their neutral positions before disengaging parking brake.

Test 4 — Blade Brake Check

Mower blades and mower drive belt should come to a complete stop within five (5) seconds after electric PTO switch is turned off (or operator rises off seat). If mower drive belt does not stop within five (5) seconds, see your dealer.

NOTE: Once the engine has stopped, PTO switch must be turned off, parking brake must be engaged, and the ground speed / steering control levers must be locked in the NEUTRAL position after the operator returns to the seat in order to start the engine.

WARNING

If the unit does not pass a safety test, do not operate it. See your authorized dealer. Under no circumstance should you attempt to defeat the purpose of the safety interlock system.

9

Image 11

Contents OPERATOR’S Manual Date Purchased Where to Find Us MowerEngine Table of Contents Children Safety Operating SafetyRead the Manual Moving Parts Slope OperationThrown Objects Enclosed Areas Fuel and MaintenanceRetaining Walls, Drop-offs, and Water Important cautions or warnings which must be followed Wear hearing protection when operating this machineGeneral Operation Transporting and StorageEmissions Slope OperationTowed Equipment RIDE-ON Units ChildrenSafe Handling of Gasoline Service and MaintenanceService & Maintenance 5100093 Decal Safety DecalsIdentification Tags North American Models Operational Safety ChecksAbcde KLM no Pqrst Safety IconsParts Bag Contents AssemblyAs shown in Figure Repeat process for other side of unit Install the Ground Speed / Steering Control LeversLever Alignment Adjustment Seat Position Adjustment Seat & Safety Switch AssemblySeat Adjustment Battery Safety Rules Charge The BatteryTire Pressure How to Prepare the EngineCheck Tire Pressures Ground Speed / Steering Control Levers Features and ControlsIgnition Switch Control FunctionsHour Meter PTO SwitchSeat Adjustment Lever Mower Height of Cut AdjustmentChecks Before Starting General Operating SafetyOperation Pushing the Rider by Hand Insert the key into the ignition switch and turn it toStarting the Engine Stopping the Rider and EngineReverse Travel Practice Zero-Turn Driving PracticeSmooth Travel Forward Travel PracticeExecuting Turns Practice Turning Around a CornerPractice Turning In Place Executing an End-Of-Row Zero TurnReinstall the mower deck guards Mower Removal and InstallationInstallation Install the roller bar connecting rod M and the hair pinTall Grass Requires Incremental Cutting MowingMowing Recommendations Height of GrassAlways start mowing on a smooth, level area When and How Often to MowMowing Patterns Mowing Methods Proper Broadcast MowingAttaching a Trailer Proper MulchingEngine Maintenance Items MaintenanceSafety Items Rider Maintenance ItemsControl handle pivots Discharge chute hinge LubricationGrease OilMower blade is bent or broken Servicing The Mower BladesInspecting the Mower Blades Never weld or straighten bent mower bladesBalancing the Mower Blade Nail Reinstalling the Mower BladesFuel Filter Engine Maintenance Adding FuelChange Engine Oil & Filter Oil Drain Tube Oil Filter Cap Change Engine Oil & FilterChange Interval Every 200 Hours Check / Fill Transmission OilTransmission Oil Filter Change Oil Type 20W-50 conventional detergent motor oilStorage Battery Maintenance Cleaning the Battery and CablesBattery Charging Neutral Adjustment Speed Balancing AdjustmentCutting Height Adjustment Parking Brake Adjustment Blade Brake Check PTO Clutch AdjustmentMower Deck Leveling Perform these adjustments on a flat level surfaceBelts Over Pulleys Mower Belt ReplacementReinstall the PTO drive belt Hydraulic Pump Drive Belt ReplacementTroubleshooting the Rider Troubleshooting WarningTroubleshooting the Mower Rider TroubleshootingStreaking Troubleshooting Common Cutting Problems355ZB2654 SpecificationsProduct Specifications Engine Power Rating InformationIndentification Disclaimer of Warranty Year Limited Warranty