CONNECTING UPPER & MIDDLE TUBE
1.Slide the upper tube (A, Figure 14) into cover (B) aligning ridge (C) with cutout (D) as shown.
2.Slide middle tube (D, Figure 15) into upper tube (E).
3.Slide middle tube (D) over boot (A). Pull strap (B) and place hole completely over pin (C).
4.Secure upper tube (E) over middle tube (D) and secure tubes together using 1/4 x 3/4 screw (F) and correct hole.
Tube and Chute Installation
D |
C |
B |
A |
Figure 14. Install Upper Tube to Cover
A.Upper Tube
B.Cover
C.Ridge, Upper Tube
D.Ridge Cutout
| E |
42” & 38” Frame |
|
Hung Mowers |
|
D | F |
| |
B |
|
C |
|
A |
|
Figure 15. Install Middle Tube
A.Lower Chute
B.Strap, Rubber
C.Pin
D.Middle Tube
E.Upper Tube
F.Screw, Phillips Head, 1/4 x 3/4
9