Normal Removal
|
| F |
|
| E |
| M |
|
| L |
|
| G |
|
| J |
|
| A |
|
| B |
|
| C |
|
| K |
|
| I |
|
H | D |
|
| A. Channel Assembly | H. Lower Chute |
| B. Cover | I. Pin |
| C. Pin | J. Middle & Upper Tube |
| D. Hitch | K. Strap, Middle |
| E. Bag | L. Ridge |
| F. White Bar | M. Ridge Cutout |
| G. Tubes |
|
Figure 17. Normal Installation & Removal
Collector Removal
WARNING
OPERATION WITHOUT BAGGER
For operation without bagger, the mower deflector MUST be properly installed in the down position and retained by the spring latch.
1.Unhook strap (K, Figure 17) from pin (I). Remove middle and upper tube (J) from cover (B).
2.Lift up cover (B) remove and empty bags (E).
3.Remove pin (C). Lift and remove channel assembly
(A) and cover (B) from hitch (D).
4.Lift discharge deflector up (E, Figure 16).
5.Remove wing nut (D) from carriage bolt (F).
6.Remove the knob (B) from carriage bolt (C).
7.Remove the lower chute (A) from carriage bolt (F).
8.Remove lower chute (A) from carriage bolt (C).
11