Snapper GT 600 Series, 2690627 manual Change Transmission Oil & filter, Check Front Axle Oil Level

Page 31

Change Transmission Oil & filter

Service Interval: After first the 50 hours, then every 250

Do not allow dirt, water, or other debris to enter the expansion chamber or transmission. Even a small amount of dirt can damage the transmission

hours.

Oil Type: Type F Automatic Transmission Fluid

Oil Capacity: 2WD: 7.3-8.4 qt. (7-8L), 4WD: 7.7-8.8 qt.

(7,3-8,3L), 4WD w/ 540PTO: 9-10 qt. (8,5-9,5L)

Oil Filter Part No.: 1726194

The transmission fluid and filter should be changed at the intervals listed above, or when performing repair work, or if fluid has become discolored from overheating or contamination.

Replace the transmission filter whenever changing trans- mission fluid. Make sure filter base and surrounding area is absolutely clean before removing the old filter.

1.Drain hydrostatic system by removing the 17mm drain plug (B, Figure 26).

2.Clean the base and replace the filter (A, Figure 26) using an appropriate filter wrench. Reinstall the drain plug.

3.Add Type F transmission fluid through the oil fill (see Figure 25).

4.Run tractor for several minutes until transmission is warm and check fluid level using the dip stick (A, Figure 25).

Check Front Axle Oil Level

Service Interval: Every 25 Hours

Oil Type: 80W-90 Gear Lube

1.Clean the area around the front axle dip stick (A, Figure 27).

2.Remove the dip stick and wipe it clean.

3.Reinsert the dip stick without threading it in. Remove the dips stick and check the oil level. Oil should be even with the top of the hash marked area.

SERVICE NOTES: The axle oil does not require chang- ing unless it has been contaminated. To change the oil, drain the main axle cavity and the two lower spindle cavi- ties by removing the drain plugs. When filling the axle after a complete draining it is necessary to fill the lower spindle cavities through their fill holes as well as the main cavity. After the initial filling the oil level of all three cavities can be checked at the dip stick (A) as oil will seep from the main cavity to the lower ones.

Regular Maintenance

BA

Figure 26. Transmission

A.Transmission Filter

B.17mm Drain Plug

A

A

Figure 27. Front Axle Lube

A. Dip Stick

29

Image 31
Contents 27HP Hydro Tractors & Mower Decks OPERATOR’S ManualPage Table of Contents Safety Rules & Information Operating Safety Slope Operation Safety Rules and InformationGeneral Operation Safety Rules & InformationSafety Rules and Information Safe Handling of Gasoline Service & MaintenanceTractor ID Tag Identification NumbersDecal Danger, Rotating Fan, Diesel Models Part No Safety DecalsSafety Decals Decal Danger Rotating BladesOperational Safety Checks Safety IconsControl Functions Features & Controls Automatic Controlled Traction Parking Brake FunctionDashboard Display Functions Stopping The Tractor & Engine General Operating SafetySlope Operation Adding FuelOperating the Tractor General Using Inboard HydraulicsPushing The Tractor By Hand Hydraulic System FunctionsAuxiliary Hydraulics Angle Left Angle Right Using Auxiliary HydraulicsOptional 3-Point Hitch Operation Select Models Attachment Weight LimitLocking The Hitch Hitch Arms Installation Starting & Stopping the PTO Connecting a Drive ShaftRear PTO Operation Select Models Checks Before StartingAttachment Recommendations Removing the Mower Deck Mower Deck Removal & InstallationMower Electrical Connection Installing the Mower DeckAttaching a Trailer Volt Power OutletStorage Before Every Spring Each Hours Fall Use Regular MaintenanceCheck Engine Coolant Level Regular MaintenanceClean Radiator Clean Transmission Oil CoolerDrain Fuel Separator Service Interval Seasonally or as NeededCheck Transmission Oil Level Service Interval Every 25 HoursCheck Front Axle Oil Level Change Transmission Oil & filterOil Filter Part No Check Mower Deck Gear Box Oil Safety Interlock System CheckService Interval Every Fall & Spring Service Interval Every 100 Hours or Fall & SpringSize Tread Battery MaintenanceCleaning the Battery and Cables Check Tire PressuresGrease LubricationOil Arm Grease Fitting Yearly Grease the ElectricLift Rod Grease Fitting YearlyRemoving the Blade Servicing The Mower BladesMaintenance Records Troubleshooting Adjustment, & Service Troubleshooting the Mower Seat Slide Adjustment Troubleshooting, Adjustment, & ServiceSeat Adjustment Brake AdjustmentTaillight & Dash Light Replacement Headlight ReplacementBattery Charging Gauge Wheel Adjustment Mower AdjustmentsLeveling The Mower Side-to-Side Adjustment Lock Nut, 5/16-18 Spacer BoltMower Drive Belt Replacement Mower Belt ReplacementTo avoid damaging belts, do not PRY 27 HP* Briggs & Stratton SpecificationsTechnical Manuals Replacement PartsMaintenance Items Optional Accessories

2690627, STGT2754D, GT 600 Series specifications

The Snapper GT 600 Series, specifically the STGT2754D model, is a standout in the realm of high-performance lawn care equipment. Designed for both efficiency and durability, this mower is perfect for homeowners with medium to large lawns who seek both power and reliability in their outdoor equipment.

One of the key features of the Snapper GT 600 Series is its robust 27 horsepower engine. This powerful engine enables the mower to tackle tough terrains and thick grass effortlessly. The innovative design includes a cutting deck size of 54 inches, which allows for a wide cutting path that reduces mowing time and enhances productivity. The adjustable cutting height provides multiple settings, accommodating various grass types and preferences, from a low, manicured look to a higher cut for more rugged areas.

The Snapper GT 600 Series incorporates advanced engineering with its high-performance transmission system. This system provides smooth acceleration and effortless steering, ensuring that maneuvering around obstacles like trees and flower beds is a breeze. The quick-turn radius enhances this maneuverability, allowing the operator to navigate tight spaces with confidence.

Technology plays a significant role in the GT 600 Series. The mower boasts an intuitive dashboard equipped with user-friendly controls, including easy-to-read displays for speed and fuel level. This feature not only enhances user experience but also promotes efficiency by allowing the operator to monitor essential metrics in real time.

Another notable characteristic of the STGT2754D is its durability. Built with a robust steel frame and heavy-duty components, this mower is designed to withstand the rigors of regular use. The weather-resistant materials ensure longevity and reliability under various conditions, making it a wise investment for any lawn care enthusiast.

Moreover, the Snapper GT 600 Series prioritizes user comfort. The high-back seat is designed for extended use, providing ample support and reducing fatigue during longer mowing sessions. Additionally, the vibration dampening system minimizes discomfort, enhancing overall control and driving experience.

In conclusion, the Snapper GT 600 Series STGT2754D is a powerful, technologically advanced lawn mower designed for efficiency and ease of use. Its combination of a robust engine, wide cutting deck, advanced transmission system, and user-friendly features make it a top choice for homeowners seeking to achieve a pristine lawn with minimal effort. Whether you're a seasoned gardener or a novice, the Snapper GT 600 Series promises to deliver performance and reliability for all your lawn care needs.