Snapper 3011523BV Snapper Rear Engine Rider Accessories, Description of Kit Models Used on

Page 29

Maintenance (Continued)

Battery Testing (Continued)

	Battery Condition Chart
State of Charge	Syringe Hydrometer	Digital Voltmeter	Five Ball Hydrometer
100% Charged w/ Sulfate Stop	1.280	12.80v	Five Balls Floating
100% Charged	1.265	12.60v	Four Balls Floating
75% Charged	1.210	12.40v	Three Balls Floating
50% Charged	1.160	12.10v	Two Balls Floating
25% Charged	1.120	11.90v	One Ball Floating
0% Charged	Less than 1.100	Less than 11.80v	Zero Balls Floating

Snapper Rear Engine Rider Accessories

Part No.	Description of Kit	Models Used on
7060517	Wheel Weight (8” Wheels)	All Rear Engine Riders
7060601	Smooth Start Clutch	All Rear Engine Riders
7060697	Dump Cart	All Rear Engine Riders
7061400	Gauge Wheel	All 33” Deck Rear Engine Riders
7060794	Gauge Wheel	All 41” & 42” Deck Rear Engine Riders
7060941	Single Bag Catcher *	All 25” Deck Rear Engine Riders
7060942	Single Bag Catcher *	All 26” & 30” Deck Rear Engine Riders
7060943	Single Bag Catcher *	All 28” & 33” Deck Rear Engine Riders
7060944	Single Bag Catcher *	All 41” & 42” Deck Rear Engine Riders
7060945	Twin Bag Catcher *	All 41” & 42” Deck Rear Engine Riders
7060946	Twin Bag Catcher *	All 28” & 33” Deck Rear Engine Riders
7060947	Bag-N-Wagon *	All 28” & 33” Deck Rear Engine Riders
7060948	Thatcherizer	All Series 7 & Newer Riders
7060964	Wagon Cover	All 28” & 33” Deck Rear Engine Riders
7061190	Weight (Front)	All Series 7 & Newer Riders
7060959	Dozer Blade (36” Blade)	All Rear Engine Riders
7060357	Tire Chains (Tires-16 x 6.50-8)	All Rear Engine Riders
7060358	Tire Chains (Tires-16 x 4.80-8)	All Rear Engine Riders
7061823	Ninja Recycling (Cover)	All 25” Deck Rear Engine Riders
7061049	Recycling (Cover)	All 25” Deck Rear Engine Riders
7061253	Ninja Recycling (Cover)	All 28” Deck Rear Engine Riders
7061254	Ninja Recycling (Cover)	All 30” Deck Rear Engine Riders
7061255	Ninja Recycling (Cover)	All 33” Deck Rear Engine Riders
7061987	Ninja Recycling (Cover)	All 41” & 42” Deck Rear Engine Riders
7061910	Utility Trailer	All Rear Engine Riders
7061911	Aerator	All Rear Engine Riders
7061912	Dethatcher	All Rear Engine Riders
7061913	Lawn Sweeper	All Rear Engine Riders
7061914	Dethatcher Kit	All Rear Engine Riders
7061915	Lawn Roller	All Rear Engine Riders
7061916	Broadcast Spreader	All Rear Engine Riders

!	* WARNING	!

Catcher bags used on SNAPPER products are made of woven fabric, and thus are subject to deterioration and wear during normal usage. Check condition of bags before each use. Immediately replace worn or damaged catcher bags with only bags recommended by SNAPPER.

Maintenance

27

Image 29

Contents Series Engine Date of Purchase Retailer Retailers Phone Number EquipmentSnapper is a trademark Simplicity Manufacturing, IncTable of Contents Protection against Tipovers Protection for ChildrenPreparation Do not allow pre-teenage children to operate machineOperation Safe Handling of GasolineTowing MaintenanceFuel Tank Features and ControlsFeatures and Controls Fuel filler cap A, is tight, and the vent B is OPERATOR’S Seat AdjustmentOperation Pre-Start Check List Engine Electric Start Operation Starting and OperationEngine runs smooth On Next OperationEngine Manual Start Setting the park brakeWheel Drive OperationMower Blade Stop the engine by turning the key A, to the OFF position Stopping Engine Wheel Drive, BladeOperation Stopping Engine, Wheel Drive Cutting Height AdjustmentBlade Park BrakeReverse Lockout Mechanism Override Operation Reverse Lockout MechanismAte blades in reverse. Stop BLADES, Look and see While backingIntroduction MaintenanceService After the First 5 Hours Blade Drive Belt Replacement Service Brake / Park BrakeCheck the Blade Drive Belt Blade BrakeCheck Engine Safety Interlock System ChecksReverse Lockout Mechanism Lubrication Grease FittingsService Every 25 Operating Hours Differential / Chain Case Lubrication Engine ServiceRear Axle Bearing Lubrication Every Two Years Service AnnuallyStorage Out of Season Removing the Fuel TankMower Deck and Component Adjustments Engine Adjustments and RepairBlade Brake Adjustment Reinstall the belt cover and tighten the bolts securelyMower Deck Adjustment Front-to-Rear Levelness Mower Deck Adjustment Side-To-Side LevelnessService BRAKE/PARK Brake Adjustment Mower Drive Belt Adjustment For 28 & 30 Decks OnlyMove the blade lever up and over to the on position To the rear main caseMeasurement should be 3/4 Rear Engine Rider Drive ComponentsSigns of excessive wear or damage Blade Sharpening Mower Blade ReplacementBlade Wear Limits Remove the idler A, Figures 46 Belt ReplacementBelt Removal Battery Removal BatteryBattery Installation Slide the battery partially into the battery housingBattery Storage Battery ServiceNew Battery Preparation Battery TestingDescription of Kit Models Used on Snapper Rear Engine Rider AccessoriesBattery Condition Chart Season Maintenance Service ScheduleMaintenance Maintenance/Replacement Parts Stop TroubleshootingProblem Probable Cause Corrective Action Move lever to the on position Year Limited Warranty Slope Guide Page Page Page Page Common Service Parts Product Specifications2811523BV 2812523BVE Snapper Products Macon Street McDonough, GA