Snapper Clean Sweep Triple Catcher manual Install Belt Cover Plate, Install Turbo Belt

Page 10

Initial Turbo Installation

B

A 50"44"

Figure 13. Belt Cover Plates

A.Belt Cover Plate for 50” Mower

B.Belt Cover Plate for 44” Mower

WARNING

When the turbo blower assembly is removed from the mower deck, the deflector MUST be properly installed.

Install Belt Cover Plate

1.Attach the belt cover plate (B, Figure 14) to the sup- port bracket (E) using a 5/16-18 x 1 capscrew (C), washer (D) and nylock nut (F).

NOTE: This cover plate must be able to pivot on the support bracket. Different belt covers are required for different applications. Refer to Figure 13.

2.Rotate the belt cover until the notch catches the idler assembly belt cover latch (A, Figure 14). Cover latch

(A) may need to be rotated for proper alignment.

Install Turbo Belt

1.Locate the correct drive belt for your installation: 44” models require drive belt 1705142, 50” models require drive belt 1707956 (the part number is stamped on the belt).

2.Loosen the hardware securing the drive pulley belt guide (B, Figure 15 & 16) and the idler pulley (C)

3.Install the drive belt as shown in Figures 15 & 16.

4.Tighten the hardware securing the drive pulley belt guide (B) and idler pulley (C). The idler belt guide should be within 1/16” of the belt.

Install Mounting Bracket

1.See Figures 15 & 16. Locate and remove the two longer capscrews used to secure the rear of the turbo housing and idler spring anchor.

2.Install the turbo mounting bracket (A) using the removed hardware. Note that the bracket is mounted in two different positions depending on the applica- tion.

 

B

C

 

 

A

 

D

 

 

 

 

E

 

 

F

Figure 14. Install Belt Cover Plate

A.

Belt Cover Latch

E. Support Bracket

B.

Belt Cover Plate

F. Nylock Nut, 5/16

C.Capscrew, 5/16-18 x 1

D.Washer, 5/16

B

C

D

A

D

Figure 15. Belt Routing - 44” Models

A.Mounting Bracket

B.Drive Pulley Belt Guide Hardware

C.Idler Pulley Hardware

D.Mounting Bracket Hardware

B

C

D

A

D

Figure 16. Belt Routing - 50” Models

A.Mounting Bracket

B.Drive Pulley Belt Guide Hardware

C.Idler Pulley Hardware

D.Mounting Bracket Hardware

8

Image 10
Contents Clean Sweep Triple Catcher OPERATOR’S ManualPage Table of Contents Safety Rules Information General WarningsGeneral Operating Instructions Installation Install Deflector Hinge Assembly Install Discharge BaffleDeflector Removal Install Deflector ModelsInstall Turbo Drive Pulley Install Idler Assembly & Belt GuideInstall Anchor Bracket Install Turbo Belt Install Belt Cover PlateInstall Mounting Bracket Install Turbo Drive Belt Install Turbo BlowerSecure Belt Cover Counter Balance & Weight Carrier Installation Initial Counter Balance & Weight Carrier InstallationFront Weight Carrier Installation Initial Hitch & Tube Installation Hitch & Tube InstallationInitial Hitch & Tube Installation Install Tubes & DeflectorInstall Cover Collector AssemblyAssemble Catcher Bags Removing & Re-attaching Grass Catcher Removing & RE-ATTACHING the Grass CatcherRemoving and Re-attaching Grass Catcher Re-attaching the Grass Catcher

Clean Sweep Triple Catcher specifications

The Snapper Clean Sweep Triple Catcher is an innovative lawn care solution designed to enhance the efficiency of grass collection while mowing. This advanced attachment is engineered to work seamlessly with Snapper mowers, providing users with a unique combination of performance, convenience, and versatility.

One of the standout features of the Triple Catcher is its large-capacity design. The catcher is equipped with three separate bags that work in unison to collect grass clippings effectively. This triad system allows for prolonged mowing sessions without frequent stops to empty the bags, making it ideal for homeowners with extensive lawns or professional landscapers looking to maximize productivity.

The Snapper Clean Sweep Triple Catcher incorporates advanced airflow technology that ensures optimal grass flow throughout the collection process. This design minimizes clogging, enabling the catcher to handle various grass types and lengths efficiently. The result is a clean and manicured lawn without the unsightly clumps of grass often left behind by traditional catchers.

In terms of installation, the Triple Catcher is user-friendly. It easily attaches to compatible Snapper mowers, ensuring a secure fit that remains stable during operation. The adjustable mounting system allows users to customize the height of the catcher, catering to different mowing conditions and grass types. This flexibility further enhances the performance of the mower and ensures that grass collection is swift and effective.

Moreover, the materials used in the construction of the Snapper Clean Sweep Triple Catcher are robust and durable, designed to withstand the rigors of outdoor use. The fabric of the bags is breathable, promoting effective airflow while preventing dust and debris from escaping. Additionally, the bright colors of the catcher enhance visibility during operation, ensuring safety and ease of use.

Maintenance is simplified with the Triple Catcher, as the bags are easily removable and washable. This convenience not only prolongs the lifespan of the catcher but also keeps it looking new and performing optimally.

In conclusion, the Snapper Clean Sweep Triple Catcher is an essential attachment for anyone looking to streamline their mowing experience. With its innovative design, superior airflow technology, and user-friendly features, it represents a valuable investment for maintaining a pristine lawn with minimal effort.