Snapper Clean Sweep Triple Catcher manual Safety Rules Information, General Warnings

Page 4

Safety Rules

& Information

Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. The trian-

gle in text signifies important cautions or warnings which must be followed.

GENERAL WARNINGS

Know the unit’s controls and how to stop quickly.

READ THE OPERATOR’S MANUALS.

Read and obey all safety decals.

Only allow responsible adults, who are familiar with the instructions, to operate the unit.

Disengage the PTO. Shut off the engine and wait for all moving parts to stop before attaching, adjusting, or disconnecting any part of the collection system.

Check the collection system to make sure it is bolted tightly to the unit.

DO NOT operate the unit without either the entire grass catcher or the deflector in place.

Turn off the PTO to disengage the blades when not mowing.

DO NOT mow in reverse. Always look down and behind before and while travelling in reverse.

DO NOT turn sharply when travelling alongside a building or any object. Slow down before turning.

DO NOT carry passengers.

When collection system is removed from the mower deck, the deflector must be properly installed.

Collector bags are subject to deterioration and wear during normal use. Inspect the bag periodically for tears, holes, or weak spots and replace with a new bag that meets manufacturer’s durability standards.

If the mower stalls or the collector chute plugs:

1.Disengage the PTO;

2.Stop the engine and remove the key;

3.Set the parking brake, and wait for all moving parts to stop.

4.Remove the foreign object or clear the chute

with a piece of wood before restarting the engine.

NEVER place hands into COLLECTOR OR MOWER housing to clear jammed objectS. Blower OR MOWER may rotate when object is removed.

For added stability and to prevent tipping or loss of control:

a. Use reduced speed on uneven ground and when turning corners.

b. Reduce loads on hillsides. It is recommended that the collection system be kept only half full when negotiating any slopes. Start mowing on slopes when the collection system is empty.

c. Mow up and down the face of slopes; never across the face of any slope.

When operating on slopes, use front counter- weights. Never operate on slopes greater than 17.6% (10°).

SAFETY DECALS

This unit has been designed and manufactured to pro- vide you with the safety and reliability you would expect from an industry leader in outdoor power equipment manufacturing.

These labels are easily applied and will act as a constant visual reminder to you, and others who may use the equipment, to follow the safety instructions necessary for safe, effective operation.

Although reading this manual and the safety instructions it contains will provide you with the necessary basic knowledge to operate this equipment safely and effec- tively, we have placed several safety labels on the unit to remind you of this important information while you are operating your unit.

All DANGER, WARNING, CAUTION and instructional messages on your rider, attachments and mower should be carefully read and obeyed. Personal bodily injury can result when these instructions are not followed. The information is for your safety and it is important! The safety decals below are on your product.

If any decals are lost or damaged, replace them at once. See your local dealer for replacements.

TP 600-2562-01-AT-SMA

ATTACHMENT DECALS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Decal - WARNING Do Not

 

 

 

 

 

 

Open Cover

Decal - WARNING

Part Number 1704405

Part Number

 

 

 

 

1717291

 

Read and obey all operation and warning decals.

2

Image 4
Contents Clean Sweep Triple Catcher OPERATOR’S ManualPage Table of Contents Safety Rules Information General WarningsGeneral Operating Instructions Installation Install Deflector Hinge Assembly Install Discharge BaffleDeflector Removal Install Deflector ModelsInstall Turbo Drive Pulley Install Idler Assembly & Belt GuideInstall Anchor Bracket Install Turbo Belt Install Belt Cover PlateInstall Mounting Bracket Install Turbo Drive Belt Install Turbo BlowerSecure Belt Cover Counter Balance & Weight Carrier Installation Initial Counter Balance & Weight Carrier InstallationFront Weight Carrier Installation Initial Hitch & Tube Installation Hitch & Tube InstallationInitial Hitch & Tube Installation Install Tubes & DeflectorInstall Cover Collector AssemblyAssemble Catcher Bags Removing & Re-attaching Grass Catcher Removing & RE-ATTACHING the Grass CatcherRemoving and Re-attaching Grass Catcher Re-attaching the Grass Catcher

Clean Sweep Triple Catcher specifications

The Snapper Clean Sweep Triple Catcher is an innovative lawn care solution designed to enhance the efficiency of grass collection while mowing. This advanced attachment is engineered to work seamlessly with Snapper mowers, providing users with a unique combination of performance, convenience, and versatility.

One of the standout features of the Triple Catcher is its large-capacity design. The catcher is equipped with three separate bags that work in unison to collect grass clippings effectively. This triad system allows for prolonged mowing sessions without frequent stops to empty the bags, making it ideal for homeowners with extensive lawns or professional landscapers looking to maximize productivity.

The Snapper Clean Sweep Triple Catcher incorporates advanced airflow technology that ensures optimal grass flow throughout the collection process. This design minimizes clogging, enabling the catcher to handle various grass types and lengths efficiently. The result is a clean and manicured lawn without the unsightly clumps of grass often left behind by traditional catchers.

In terms of installation, the Triple Catcher is user-friendly. It easily attaches to compatible Snapper mowers, ensuring a secure fit that remains stable during operation. The adjustable mounting system allows users to customize the height of the catcher, catering to different mowing conditions and grass types. This flexibility further enhances the performance of the mower and ensures that grass collection is swift and effective.

Moreover, the materials used in the construction of the Snapper Clean Sweep Triple Catcher are robust and durable, designed to withstand the rigors of outdoor use. The fabric of the bags is breathable, promoting effective airflow while preventing dust and debris from escaping. Additionally, the bright colors of the catcher enhance visibility during operation, ensuring safety and ease of use.

Maintenance is simplified with the Triple Catcher, as the bags are easily removable and washable. This convenience not only prolongs the lifespan of the catcher but also keeps it looking new and performing optimally.

In conclusion, the Snapper Clean Sweep Triple Catcher is an essential attachment for anyone looking to streamline their mowing experience. With its innovative design, superior airflow technology, and user-friendly features, it represents a valuable investment for maintaining a pristine lawn with minimal effort.