Snapper Clean Sweep Triple Catcher manual Install Turbo Blower, Install Turbo Drive Belt

Page 11

Install Turbo Blower

1.Install the turbo unit by sliding the turbo pivot rod into the pivot bracket at the front edge of the mower deck (A, Figure 17).

2.Tilt the deflector (B) UP.

3.Rotate the turbo unit (C) into position on the dis- charge of the mower deck, and “latch” the slot in the turbo housing over and onto the anchor bracket at

(D). Tighten the wing nut (E) to secure.

Initial Turbo Installation

E

D

 

C

B

 

A

Figure 17. Install Turbo Blower

 

A. Pivot Bracket

D. Anchor Bracket

B. Deflector

E. Wing Nut

C. Turbo

 

Install Turbo Drive Belt

1.See Figure 18. Attach the turbo belt to the top RH pulley on the mower deck. Pull back on the belt ten- sioning lever to slacken the belt. A view (from right front of mower) of the belt routing is shown at right.

NOTE: While attaching, it may be necessary to unlatch the turbo and realign the belt on the pulleys inside the turbo housing.

2.After the belt is installed, adjust the belt stop (D, FIgure 7 & 8) so that it is 1/8” away from the backside of the belt.

Idler

 

Mower Deck

 

Turbo Drive Pulley

Pulleys

 

 

 

 

 

Mower Deck

 

 

Arbor Pulley

 

To Slacken

FRONT

 

 

 

Belt

 

Turbo Drive

 

 

Pulley

 

 

Figure 18. Turbo Belt Routing

Secure Belt Cover

1.The belt cover plate (A, Figure 19) is a safety shield

— after attaching or detaching the turbo unit, it MUST BE rotated onto the belt cover latch (B).

CAUTION

Before you begin operating the unit with the Turbo attached, be certain you have read all of the safety and operational information on the last page of this instruction sheet, as well as the Operator’s Manual for the tractor and any grass catchers or other collection devices used in conjunction with this turbo blower.

BA

Figure 19. Belt Cover

A.Belt Cover Plate

B.Belt Cover Latch

9

Image 11
Contents OPERATOR’S Manual Clean Sweep Triple CatcherPage Table of Contents General Warnings Safety Rules InformationGeneral Operating Instructions Installation Deflector Removal Install Discharge BaffleInstall Deflector Hinge Assembly Models Install DeflectorInstall Anchor Bracket Install Idler Assembly & Belt GuideInstall Turbo Drive Pulley Install Mounting Bracket Install Belt Cover PlateInstall Turbo Belt Secure Belt Cover Install Turbo BlowerInstall Turbo Drive Belt Front Weight Carrier Installation Initial Counter Balance & Weight Carrier InstallationCounter Balance & Weight Carrier Installation Hitch & Tube Installation Initial Hitch & Tube InstallationInstall Tubes & Deflector Initial Hitch & Tube InstallationAssemble Catcher Bags Collector AssemblyInstall Cover Removing & RE-ATTACHING the Grass Catcher Removing & Re-attaching Grass CatcherRe-attaching the Grass Catcher Removing and Re-attaching Grass Catcher

Clean Sweep Triple Catcher specifications

The Snapper Clean Sweep Triple Catcher is an innovative lawn care solution designed to enhance the efficiency of grass collection while mowing. This advanced attachment is engineered to work seamlessly with Snapper mowers, providing users with a unique combination of performance, convenience, and versatility.

One of the standout features of the Triple Catcher is its large-capacity design. The catcher is equipped with three separate bags that work in unison to collect grass clippings effectively. This triad system allows for prolonged mowing sessions without frequent stops to empty the bags, making it ideal for homeowners with extensive lawns or professional landscapers looking to maximize productivity.

The Snapper Clean Sweep Triple Catcher incorporates advanced airflow technology that ensures optimal grass flow throughout the collection process. This design minimizes clogging, enabling the catcher to handle various grass types and lengths efficiently. The result is a clean and manicured lawn without the unsightly clumps of grass often left behind by traditional catchers.

In terms of installation, the Triple Catcher is user-friendly. It easily attaches to compatible Snapper mowers, ensuring a secure fit that remains stable during operation. The adjustable mounting system allows users to customize the height of the catcher, catering to different mowing conditions and grass types. This flexibility further enhances the performance of the mower and ensures that grass collection is swift and effective.

Moreover, the materials used in the construction of the Snapper Clean Sweep Triple Catcher are robust and durable, designed to withstand the rigors of outdoor use. The fabric of the bags is breathable, promoting effective airflow while preventing dust and debris from escaping. Additionally, the bright colors of the catcher enhance visibility during operation, ensuring safety and ease of use.

Maintenance is simplified with the Triple Catcher, as the bags are easily removable and washable. This convenience not only prolongs the lifespan of the catcher but also keeps it looking new and performing optimally.

In conclusion, the Snapper Clean Sweep Triple Catcher is an essential attachment for anyone looking to streamline their mowing experience. With its innovative design, superior airflow technology, and user-friendly features, it represents a valuable investment for maintaining a pristine lawn with minimal effort.