Snapper ECLP21601RV important safety instructions Decal Identification

Page 16

DECAL IDENTIFICATION

WARNING DECAL P/N 2-9825

(1)WARNING: Located on the top edge of the Discharge Door. It advises operator regarding Safety Instructions.

WARNING (DECK)

DECAL

P/N 7-2921

(2)WARNING (DECK): Read and follow Starting and Safety Instructions in Owner’s Manual. Improper use of machine can result in serious injury.

 

ENGINE

CHUTE WARNING

SYMBOL

 

DECAL 2-9784

 

 

CHOKE

ENGINE SPEED

FAST (RABBIT)

CONTROL

POSITION

DECAL

 

P/N 2-8887

 

(3)WARNING: Located on the left side of the back wall of the mower deck. It advises operator regarding safety instructions.

SLOW (TURTLE)

POSITION

WARNING DECAL

2-2841

(4)WARNING: Located on the right side of the Mower Deck. It advises operator of the danger of the rotating blade.

SPARK PLUG

SYMBOL

P/N 2-9779

(6)ENGINE SPEED CONTROL: Indicates direction to increase Engine RPM (Rabbit), decrease Engine RPM (Turtle), and direction to choke.

FAST SPEED (RABBIT)

3rd TOP SPEED

GROUND

SPEED

DECAL 2nd MEDIUM SPEED P/N 2-8886

1st SLOW SPEED (TURTLE)

(5)SPARK PLUG: Warns of potential electrical shock from plug while engine is running.

(7)GROUND SPEED: Shows direction of movement and the ability to select one of three ground speeds by moving the lever. The number 3 (Rabbit) indicates the top speed, number 2 indicates the medium speed and the number 1 (Turtle) indicates the slowest speed.

16

Image 16
Contents Safety Instructions & Operator’s Manual for Slope Operation Protection for ChildrenPreparation Maintenance and Storage OperationTable of Contents Introduction FamiliarizationNomenclature Operating Instructions PRE-START Check ListStarting & Operation 2.2.1. Engine & Blade Recoil StartHandle Height Adjustment Cutting Height AdjustmentStarting & Operation 2.2.2. Propelling Mower StoppingInstallation of Grass Catcher Recycling OperationMaintenance Service After First 5 Hours Change Engine OILGrease Level in Transmission Wheel Drive ControlService Annually Storage ProcedureCheck Mower Blade Check Engine to Transmission Drive BeltMower Blade Replacement 4.1.1. Standard Blade Wear Limit Repair & AdjustmentsBlade Sharpening Repair & Adjustments Belt Service Engine Drive Belt ReplacementProblem Probable Cause Corrective Action Using Recoil StarterService Performed Each Clean Sponge Element Engine Manual100 USE HRS SeasonDecal Identification Height Control Decal Year Limited Warranty Disclaimer of WarrantyService Notes Cast Aluminum Deck Commercial Model Walk Mowers Series