DECAL IDENTIFICATION
HEIGHT
CONTROL
DECAL
P/N
(8)HEIGHT CONTROL INSTRUCTION: Shows direction of movement of HEIGHT ADJUST HANDLE to select a change in height if cut from highest cutting height (clockwise) to the lowest height (counter- clockwise). Note that there is a total of eleven heights of cut.
EUROPEAN NOISE CONTROL DECAL
(9)NOISE CONTROL: This unit is certified to be within the 100 dBA sound power limit at the specified Engine RPM.
EUROPEAN
COMMUNITY
DECAL
29776
(10)EUROPEAN PERFORMANCE: Maximum level of vibration measured at the operators hand is 23.4 m/sec2.
OPERATOR PRESENCE
CONTROL DECAL
P/N
GROUND DRIVE
DECAL
P/N
(12)GROUND DRIVE: Pull lever against handle to engage drive. Release lever to disengage drive.
CHUTE DEFLECTOR DECAL P/N
(13)WARNING: DO NOT operate without grass catcher, side chute or plug installed.
WARNING
DECAL
P/N
(14)WARNING: Located on the right side of the Mower Deck. It advises operator of the danger of the rotating blade.
(11)OPERATOR PRESENCE CONTROL: Pull control against handle to start engine and blade. Release control to stop engine and blade.
17