Section 3 - MAINTENANCE
3.1INTRODUCTION
To retain the quality of the mower, use genuine SNAPPER replacement parts only. Contact a local SNAPPER dealer for parts and service assistance. For the correct part or information for a particular mower, always mention model and serial number.
3.2SERVICE - AFTER FIRST 5 HOURS
3.2.1. CHANGE ENGINE OIL
This engine is equipped with two oil drain plugs. One drain plug is located on the bottom of the engine and requires a 5/16” allen wrench to remove. The other is located adjacent to the oil filter. It requires a 14mm socket to remove.
The simplest way to drain the oil is to tilt the mower on it’s side (carburetor side up). Remove the oil fill cap and allow the oil to drain from the filler tube into a shallow pan. Refer to the Engine Owner’s Manual for details regarding oil specifications, oil and oil filter change intervals.
WARNING
DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.
OIL FILTER (Turn
To Remove)
OIL DRAIN PLUG (14mm)
FIGURE 3.1
3.2.2. GREASE LEVEL IN TRANSMISSION
The transmission requires no lubrication or maintenance. If transmission leaks or malfunctions, return machine to an authorized Snapper dealer for repair.
3.2.3. WHEEL DRIVE CONTROL
The wheel drive control requires periodic adjustment to maintain proper drive function. The adjustment is performed with the thumb screw located on the right handle and requires no tools. Refer to Section
“WHEEL DRIVE CONTROL ADJUSTMENT”.
9