Snapper GT600 manual Lubrication, Grease, Oil

Page 34

Regular Maintenance

Lubrication

Service Interval: Every 25 Hours

Lubricate the unit at the locations shown in Figures 31- 37 as well as the lubrication points listed. Generally, all moving metal parts should be oiled where contact is made with other parts. Keep oil and grease off belts and pulleys. Wipe surfaces clean before and after lubrica- tion.

Grease:

•steering linkage

•foot pedal

•mower linkage

•transmission idler assembly pivot

•rear axle shafts (remove wheel hubs)

•front axle where it contacts the frame

•all drive shaft universal joints

•mower belt tension bracket pivots

Use grease fittings when present. Automotive lithium grease is recommended.

Oil:

•control linkage

•seat adjustment assembly

•brake linkage

•mower deck height adjustment linkage

Every 25 Hours

FRONT

Every 100 Hours

or Yearly

Figure 32. Engine Drive Shaft

Figure 33. Front Axle Drive Shaft

Figure 34. Arbor Lubrication Point

Figure 31. Lubricating the Tractor

32

Image 34

Contents OPERATOR’S Manual 27HP Hydro Tractors & Mower DecksPage Table of Contents Safety Rules & Information Operating Safety Safety Rules and Information Slope OperationSafety Rules & Information General OperationIgnition System Service & Maintenance Safe Handling of GasolineIdentification Numbers Tractor ID TagDecal Danger Rotating Blades Safety DecalsSafety Decals Decal Danger, Rotating Fan, Diesel Models Part NoSafety Icons Operational Safety ChecksControl Functions Features & Controls Parking Brake Function Automatic Controlled TractionDashboard Display Functions Adding Fuel General Operating SafetySlope Operation Stopping The Tractor & EngineOperating the Tractor Hydraulic System Functions Using Inboard HydraulicsPushing The Tractor By Hand GeneralUsing Auxiliary Hydraulics Auxiliary Hydraulics Angle Left Angle RightOptional 3-Point Hitch Operation Select Models Attachment Weight LimitLocking The Hitch Hitch Arms Installation Checks Before Starting Connecting a Drive ShaftRear PTO Operation Select Models Starting & Stopping the PTOAttachment Recommendations Mower Deck Removal & Installation Removing the Mower DeckInstalling the Mower Deck Mower Electrical ConnectionAttaching a Trailer Volt Power OutletStorage Regular Maintenance Before Every Spring Each Hours Fall UseClean Transmission Oil Cooler Regular MaintenanceClean Radiator Check Engine Coolant LevelService Interval Seasonally or as Needed Drain Fuel SeparatorService Interval Every 25 Hours Check Transmission Oil LevelCheck Front Axle Oil Level Change Transmission Oil & filterOil Filter Part No Service Interval Every 100 Hours or Fall & Spring Safety Interlock System CheckService Interval Every Fall & Spring Check Mower Deck Gear Box OilCheck Tire Pressures Battery MaintenanceCleaning the Battery and Cables Size TreadGrease LubricationOil Fitting Yearly Grease the ElectricLift Rod Grease Arm Grease Fitting YearlyServicing The Mower Blades Removing the BladeMaintenance Records Troubleshooting Adjustment, & Service Troubleshooting the Mower Brake Adjustment Troubleshooting, Adjustment, & ServiceSeat Adjustment Seat Slide AdjustmentTaillight & Dash Light Replacement Headlight ReplacementBattery Charging Mower Adjustments Gauge Wheel AdjustmentSide-to-Side Adjustment Lock Nut, 5/16-18 Spacer Bolt Leveling The MowerMower Drive Belt Replacement Mower Belt ReplacementTo avoid damaging belts, do not PRY Specifications 27 HP* Briggs & StrattonOptional Accessories Replacement PartsMaintenance Items Technical ManualsPage Lawn Care Lawn Care & Mowing Information Page