Snapper ELP21703BDV specifications Engine Speed Control, Operator Presence Control OPC, Clutch

Page 7

Decal Identification (Continued)

(3) Engine Speed Control:

Indicates direction to increase engine RPM (rabbit), decrease engine RPM (turtle).

(5) Operator Presence Control (OPC):

Arrow points to the OPC bail. When bail is rotated rearward, the engine may be started and will run as indicated by the engine with rotating arrow. With the engine running, the blade is rotating as indicated by the cut grass symbol. When the bail is released and rotates forward, the engine will stop.

Operator Safety

(4) Speed Selector:

Indicates ground speed selection: ‘3’ (Rabbit) indicates top speed; ‘2’, medium speed; ‘1’ (Turtle), slowest speed.

(6) Clutch:

Located on the plastic grip of the traction control lever. Moving the lever toward the handle engages the traction clutch and forward motion starts. When the lever is released, the clutch disengages and forward motion stops.

(7) Height Control Instruction:

Shows direction of movement of Height Adjust Handle to select a change in height of cut from highest cutting height (clockwise) to the lowest (counterclockwise). Note that there is a total of eleven heights of cut.

5

Image 7

Contents European 21 Cast Aluminum Deck Walk Mowers Series Simplicity Manufacturing, Inc Date of Purchase Retailer Retailers Phone Number EquipmentEngine Snapper is a trademarkTable of Contents Preparation Protection for ChildrenSlope Operation Preparation From Previous ColumnOperation From Previous Column Maintenance and StorageSafe Handling of Gasoline From Previous OperationSerial Tag Decal IdentificationClutch Operator Safety Speed SelectorEngine Speed Control Operator Presence Control OPCFeatures and Controls Features and ControlsDischarge Door Grass Catcher Engine and Blade Operation Pre-Start Check ListStopping OperationPropelling the Mower Recycling Operation Cutting Height AdjustmentInstalling the Grass Catcher Installing the Grass CatcherChange Engine Oil Maintenance Maintenance IntroductionService After First 5 Hours Grease Level in TransmissionService Periodic MaintenanceStorage Procedure Standard Blade Wear Limit Mower Blade ReplacementBlade Sharpening Check for proper drive belt tension AdjustmentWhen proper belt tension has been set, operate Operating the mowerEngine To Transmission Belt Replacement Belt ServiceMaintenance/Replacement Parts Maintenance Service ScheduleProbable Cause Corrective Action TroubleshootingYear Limited Warranty Slope Guide Page Page Part Number Product Specifications Common Service PartsSnapper Products Macon Street McDonough, GA