Snapper ELP21703BDV specifications Installing the Grass Catcher

Page 12

Operation (Continued)

!

WARNING

!

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

!

WARNING

!

DO NOT operate mower without entire grass catcher, side chute or recycling plug in place. Grass Catcher components are subject to deterioration during normal use. Inspect frequently and replace worn or damaged components immediately.

Installing the Grass Catcher

1.Follow the WARNING statement found on this page.

2.Lift the discharge door (A, Figure 8) located at the rear of the machine.

3.Install the grass catcher (B) onto the rear of the machine. Position the rod ends (C) of the catcher frame over the tabs (D) located at the rear of deck. Release the discharge door, which is spring loaded, onto the top of the grass catcher.

A

Operation

D

 

 

C

!

WARNING

!

Grass Catcher bags used on SNAPPER products are made of woven fabric, and are subject to deterioration and wear during normal usage. Check condition of bag before each use. Immediately replace worn or damaged catcher bags with only bags recommended by SNAPPER. The grass catcher is optional equipment on some models.

B

Figure 8: Installing the Grass Catcher

10

www.snapper.com

Page 11 Page 13
Image 12
Page 11 Page 13
Contents European 21 Cast Aluminum Deck Walk Mowers Series Date of Purchase Retailer Retailers Phone Number Equipment EngineSnapper is a trademark Simplicity Manufacturing, IncTable of Contents Protection for Children Slope OperationPreparation From Previous Column PreparationMaintenance and Storage Safe Handling of Gasoline From PreviousOperation Operation From Previous ColumnDecal Identification Serial TagOperator Safety Speed Selector Engine Speed ControlOperator Presence Control OPC ClutchFeatures and Controls Features and ControlsDischarge Door Grass Catcher Operation Pre-Start Check List Engine and BladeOperation StoppingPropelling the Mower Cutting Height Adjustment Recycling OperationInstalling the Grass Catcher Installing the Grass CatcherMaintenance Maintenance Introduction Service After First 5 HoursGrease Level in Transmission Change Engine OilMaintenance Service PeriodicStorage Procedure Mower Blade Replacement Standard Blade Wear LimitBlade Sharpening Adjustment When proper belt tension has been set, operateOperating the mower Check for proper drive belt tensionBelt Service Engine To Transmission Belt ReplacementMaintenance Service Schedule Maintenance/Replacement PartsTroubleshooting Probable Cause Corrective ActionYear Limited Warranty Slope Guide Page Page Product Specifications Common Service Parts Part NumberSnapper Products Macon Street McDonough, GA
Top Page Image Contents