Snapper EP217019BV Mower Blade Replacement Standard Blade Wear Limit, Blade Sharpening

Page 13

Section 4 - REPAIR & ADJUSTMENTS

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Wear heavy leather gloves when handling or working around cutting blades. Blades are extremely sharp and can cause severe injury.

4.1MOWER BLADE REPLACEMENT

4.1.1. STANDARD BLADE WEAR LIMIT

1.Inspect blade frequently for signs of excessive wear or damage. See Figure 4.1.

NEW BLADE

WEAR LIMIT (NOTCH STARTS)

2.Replace the blade if it is badly chipped, bent, noticeably out of balance or has cracks or notch in either tip. See Figure 4.1 & 4.2. Replace with new blade.

WARNING

DO NOT use a cutting blade that shows signs of excessive wear or damage. Refer to Section “MOWER BLADE REPLACEMENT” for proper blade inspection and service procedures.

4.1.2. BLADE SHARPENING

1.Disconnect spark plug wire and secure end away from plug.

IMPORTANT: Drain fuel tank before tipping mower. DO NOT tip machine with carburetor or spark plug down. Oil from crankcase will saturate the air filter and cause the engine to be hard to start or not start at all. If contamination does occur, the air filter will have to be replaced.

DANGEROUS CONDITION ! DO NOT USE ON MOWER ! REPLACE WITH NEW BLADE.

2.Tilt mower up on its rear wheels. Do not tilt mower with spark plug or carburetor down.

3.Remove blade. See Figure 4.3.

MAKE SURE THAT

BLADE HUB IS

SEATED

BLADE BETWEEN

HUB FLANGES

FIGURE 4.1

4.1.1.A. NINJA BLADE WEAR LIMIT

1.Inspect blade frequently for signs of excessive wear or damage. See Figure 4.2.

NEW BLADE

WEAR LIMIT.

CRACKS OR

 

 

NOTCHES

 

BEGIN TO

 

APPEAR ON TIP

FLANGE

BLADE

CONE WASHER (Concave Side Up)

CAPSCREW

FIGURE 4.3

DANGEROUS !

DO NOT USE A BLADE IN

THIS CONDITION !

FIGURE 4.2

13

Image 13
Contents European 21 Steel Deck Walk Mowers Series Engine Designation Series Designation Engine Horse PowerFrom Previous Column Important Safety InstructionsDo not refuel the machine indoors From PreviousImportant Safety Instructions Table of Contents Introduction Engine Speed ControlNomenclature Starting & Operation Engine & Blade PRE-START Check ListHandle Height Adjustment Cutting Height AdjustmentPropelling Mower StoppingInstallation of Grass BAG Door Type Bag Recycling Operation Dispose of drain oil properly Service After First 5 Hours 3.2.1. Change Engine OILImportant Drain fuel tank before tipping mower Storage Procedure Service AnnuallyCheck Mower Blade Check Engine Drive BeltBlade Sharpening Mower Blade Replacement Standard Blade Wear Limit1.A. Ninja Blade Wear Limit Wheel Drive Control Adjustment Cleaning Drive Disc & Driven Disc Driven and Drive Disc ServiceDrive Spring Repair/Replacement Driven Disc AdjustmentOn Next Replacing Rubber Driven Disc Repair & Adjustments Engine Drive Belt Replacement Stretch Type Belts Belt ServiceOn Next Pulley Position Reinstall blade hub and cutter bladeCorrective Action Problem Probable CauseMAINTENANCE/REPLACEMENT Parts Service Performed Each100 USE HRS SeasonDecal Identification CE Compliance Specifications Disclaimer of Warranty Year Limited WarrantyPage Page Page European Steel Deck Walk Mowers Series

EP217019BV specifications

The Snapper EP217019BV is a versatile and robust electric lawn mower that combines power and convenience to deliver an exceptional mowing experience. Designed for residential use, this mower is perfect for homeowners looking to maintain their lawns with ease and efficiency.

One of the standout features of the Snapper EP217019BV is its powerful 48V lithium-ion battery system. This battery provides ample power to tackle even the toughest grass while delivering a significant runtime, allowing users to mow larger lawns without the need for frequent recharging. The battery’s quick-charge capability means less downtime, ensuring efficiency and convenience for users.

The 21-inch cutting deck made of high-strength steel ensures durability and longevity, allowing the mower to withstand the rigors of regular use. The cutting deck is not only strong but also lightweight enough to maneuver easily around obstacles in your yard. Moreover, it features a 3-in-1 cutting system that allows users to mulch, bag, or side discharge grass clippings, providing flexibility based on personal preference and lawn conditions.

Another notable characteristic of the Snapper EP217019BV is its adjustable cutting heights, which can be set between 1 to 4 inches. This range enables users to customize their cut for different types of grass and seasonal conditions, achieving the desired appearance for their lawn. The single-lever height adjustment makes switching between different height settings a breeze.

The mower is equipped with an ergonomic handle, designed for comfort during extended mowing sessions. It is also foldable, allowing for easy storage in compact spaces, a practical feature for users with limited storage options.

In terms of technology, the Snapper EP217019BV incorporates advanced brushless motor technology that enhances efficiency and performance while reducing maintenance needs. The brushless motor not only increases battery life but also offers quiet operation, making it suitable for use in residential areas without disturbing neighbors.

Overall, the Snapper EP217019BV stands out as a reliable electric lawn mower, marrying powerful performance with user-friendly features. With its efficient battery system, durable cutting deck, adjustable heights, and advanced technologies, this mower is an excellent choice for anyone looking to maintain a beautiful lawn.