Snapper ERP217018BV, EP217018BV Service Performed Each, 100, USE HRS Season

SERVICE SCHEDULE

ITEM	SERVICE PERFORMED	REF.	EACH	5	25	50	100	EACH
			USE	HRS	HRS	HRS	HRS	SEASON
Engine Oil	Check Oil Level	Page 7	X
	Initial Oil Change	Page 12		X
	Periodic Oil Change	Page 13			X*
Air Pre-Cleaner	Clean Sponge Element	Engine Manual			X**
Air Cleaner	Clean or Replace	Engine Manual			X**
Spark Plug	Replace	Engine Manual					X
Engine Cooling	Clean Shroud & Fins	Engine Manual					X**
System
Drive Belts	Check For Wear And	Pages 19-20			X	X		X
	Tension
Mower Blade	Check For Wear, Damage	Pages 14-15	X
	& Replacement
Mower Deck	Clean Debris	Page 7	X
	Accumulation
Transmission	Check Grease Level	Page 12			X			X
Grease
	Periodic Grease Check	Page 12						X
Drive Disc	Check for Wear Damage	Pages 16-18				X
	& Replacement
*Change oil every 25 hours when operating under heavy load or high temperatures.
**Clean more often under dusty conditions or when air debris is present
4.6 MAINTENANCE/REPLACEMENT PARTS

MAINTENANCE PARTS

Engine Speed Control	7-4460
Blade Control Cable	3-4608
Clutch Pull Cable (See Parts Manual)	3-4604
Cutter Blade (Air Lift Compatible)	1-9795
Cutter Blade (Mulching)	1-7168
Cutter Blade (Not Air Lift Compatible)	2-6691
Cutter Blade (Ninja - Quad Edge)	2-6407
Wheel Drive Pulley to Transmission Pulley Belt	1-2354
Engine to Drive Disc Belt	4-6784
Cantilever Drive Tire Assembly	7-3528
Rubber Drive Tire	4-1855
Parts Manual for 21” Steel Deck Walk Behind Mower Series 18	06139

22