Section 2 - OPERATING INSTRUCTIONS
2.6 INSTALLATION of GRASS BAG ADAPTER
WARNING
DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.
STEP 1: Install the grass bag adapter and secure to the side and top of the deck with the two nuts provided on the machine. Slot in front edge of adapter must be under nut located on top of deck. See Figure 2.10.
SECURE ADAPTER
TO DECK WITH NUTS
SECURE
WITH NUTS
ADAPTER
FIGURE 2.10
2.7INSTALLATION of RECYCLING PLUG (Optional Accessory on Some Models)
STEP 1: Once adapter has been installed, recycling may be desired. Insert recycling plug completely and securely into adapter. See Figure 2.11. Install grass bag as a safeguard.
STEP 2: Refer to Section “OPERATING INSTRUCTIONS – RECYCLING OPERATION”.
INSERT RECYCLING PLUG
PLUGCOMPLETELY AND SECURELY INTO ADAPTER. INSTALL GRASS BAG.
ADAPTER
FIGURE 2.11
2.8INSTALLATION of GRASS BAG (Door Type Bag)
Install grass bag by sliding connector over flange of adapter. See Figure 2.12.
Attach grass bag hooks over middle handle cross bar. See Figure 2.13.
SLIDE CONNECTOR
HOOK TO MIDDLE OVER FLANGE
HANDLE CROSS BAR
FIGURE 2.12
9