Snapper LT145H33HBV, LT145H38HBV, LT150H38HKV, WLT145H38HBV Reverse Lockout Mechanism

Page 11

Section 2 - OPERATING INSTRUCTIONS

2.7. REVERSE LOCKOUT MECHANISM

Data indicates that tragic back-over accidents occur each year. These accidents usually involve unsupervised children. Many times these children have been given rides on the machine and have been trained to view this potentially dangerous piece of machinery as fun rather than being taught how to avoid danger.

This riding mower has a Reverse Lockout Mechanism. This mechanism prevents the mower from being shifted into reverse with the blades running. To shift into reverse you must first stop the blades and then shift to reverse. It is our recommendation that this mechanism remain functional and the operator of this equipment develop the habit of never backing up with the blades running. As the Safety Instructions Indicate, DO NOT operate blades in reverse. STOP BLADES, LOOK AND SEE BEHIND AND DOWN for children, pets and hazards before and while backing.

We realize that this could cause a change to your previous mowing method but we encourage you to adjust to this new system. Do not defeat the Reverse Lockout Mechanism.

If you operate your mower near roadways or use attachments that require quicker shifting to reverse, there is an override lever provided. This lever can be pushed and held before starting the blades and will allow reverse operation until the blade engagement lever is moved to the “OFF” position, at which time the system will return to its Reverse Lockout mode. This feature should never be selected unless you are absolutely sure that no children or others are present in the mowing area and that all children are away and supervised by a responsible adult.

2.7.1.Reverse Lockout Mechanism Override

1.Stop machine. Stop blades.

2.Depress and hold Override Lever.

3.Raise blade engagement lever to "ON".

4.Release override lever.

WARNING

LOOK and SEE behind and down for children, pets and hazards before and while backing.

IMPORTANT! DO NOT use the Reverse Lockout Mechanism Override as the normal operating mode. To return to the Reverse Lockout Mechanism mode, move the blade engagement lever down to the “OFF” position. The Override will reset to Reverse Lockout.

2.7.2.Check the Reverse Lockout Mechanism Before each use, check the Reverse Lockout Mechanism for proper function. Perform the following check with the engine “OFF”.

1.With engine “OFF”, raise blade engagement lever to "ON".

2.The Reverse Lockout Mechanism must prevent the speed control lever from going into reverse.

WARNING

DO NOT operate machine if Reverse Lockout Mechanism is not functioning properly. Contact your SNAPPER dealer immediately for assistance.

DANGER

LOOK and SEE behind and down for children, pets and hazards before and while backing.

BLADES must be turned off before backing machine. DO NOT allow children on machine (even with

blades off) or in yard when mowing.

11

Image 11
Contents Model Number Explanation Lawn Tractor Hydrostatic Drive Series HImportant Safety Instructions Operation Table of Contents Controls ComponentsOPERATOR’S Seat Adjustment Front to Rear Adjustment PRE-START ChecklistOFF Starting & Operation Starting EngineStopping Wheel Drive Starting & Operation 2.3.2. Starting Wheel DriveStarting Mower Blade Releasing Park Brake Setting Park BrakeCutting Height Adjustment Stopping Stopping Mower BladeRolling Tractor with Engine OFF 2.6.1. Rolling Hydro Models Reverse Lockout Mechanism Override Reverse Lockout MechanismCheck Blade Brake Service After First 5 HoursIntroduction Change Engine OILCheck 38 Deck Drive Belt Service Every 25 Operating HoursCheck Engine Check 33 Deck Drive BeltTractor Lubrication Fuel Filter Service AnnuallySpark Plug Hydrostatic Transmission OIL Service Annually 3.4.2. Fuel FilterFrom Previous Deck Blade Brake Adjustment Engine Adjustments & RepairBlade Brake Adjustment On next Blade Belt Adjustment 33 DeckBlade Belt Adjustment 38 Deck Side View of Deck Adjusting Mower Blade 33 Deck from previousDeck Level Adjustment Front to Rear Front Lift ROD Deck Level Adjustment Side to SideDeck Level Adjustment Front to Rear Sector Plates Front of Tractor Rear to Front View of Deck Deck Level Adjustment Front to RearTractor Drive Components Brake Adjustment Shifter Adjustment Steering AdjustmentMounting Ninja Blade Sharpening Mower Blade Service Standard Blade Wear LimitsNinja Blade Wear Limits Standard Blade SharpeningTraction Drive Belt Replacement Mower Deck Removal Mower Blade ReplacementTraction drive belt removal View from Underneath Tractor Traction drive belt replacementDeck Drive Belt Battery Storage Battery Battery RemovalBattery Installation Battery ServiceNEW Battery Preparation Battery TestingAvailable Accessories LT145H33HBV & LT145H38HBV Schematic Wiring Harness P.NSchematic Wiring Harness P.N LT150H38HKV Troubleshooting Guide Troubleshooting Guide LT145H38HBV Tractor Drive Belts Mower BladesNinja LT145H33HBVYear Limited Warranty Primary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Service Notes Service Notes Lawn Tractor Hydrostatic Drive Series H

LT145H33HBV, LT145H38HBV, LT150H38HKV, WLT145H38HBV specifications

The Snapper LT145H33HBV, LT145H38HBV, LT150H38HKV, and WLT145H38HBV are versatile lawn tractors designed to deliver exceptional performance and efficiency for homeowners and professionals alike. Each model incorporates a host of features and technologies that enhance usability and mowing capabilities.

Starting with the LT145H33HBV, this model is equipped with a powerful Briggs & Stratton engine, providing reliable performance for handling various lawn care tasks. Its 33-inch cutting deck offers maneuverability, making it ideal for smaller to medium-sized yards. The LT145H33HBV also features an automatic transmission that allows for smooth and easy speed adjustments, promoting a more comfortable mowing experience. Its adjustable seat provides additional comfort during longer mowing sessions, and the sturdy construction ensures durability and longevity in outdoor conditions.

The LT145H38HBV model builds upon the foundation of the LT145H33HBV, but it comes with a larger 38-inch cutting deck, which is perfect for tackling larger lawns more efficiently. Like the LT145H33HBV, it features a reliable Briggs & Stratton engine, ensuring powerful performance. The LT145H38HBV is also equipped with Snapper’s proprietary Smart Speed technology, allowing users to easily switch between different speed settings, enabling precision control while navigating around obstacles.

On to the LT150H38HKV, this model offers even more power and features. With a robust 150cc engine and a 38-inch cutting width, it balances power and size perfectly. The LT150H38HKV also includes a high-back seat for enhanced comfort and support. Furthermore, this model integrates integrated mulching capabilities, letting users maintain their lawns effectively by returning valuable nutrients back to the soil. The easy-to-use cutting height adjustment system ensures users can achieve the desired grass length with minimal hassle.

Lastly, the WLT145H38HBV combines innovative technology with user-friendly design. This model stands out with its exceptional maneuverability due to its compact size. The 38-inch cutting deck expertly handles various terrains, making it a great choice for gardens with tight spaces. It incorporates a reinforced deck for added strength and longevity. Additionally, the WLT145H38HBV is designed with a comfortable steering wheel and ergonomic controls, ensuring that users can enjoy a seamless mowing experience.

In summary, Snapper's LT145H33HBV, LT145H38HBV, LT150H38HKV, and WLT145H38HBV models are not only equipped with powerful engines and durable cutting decks but also feature technologies that promote user comfort and cutting efficiency. With versatile options suitable for a range of lawn sizes, these tractors are designed to meet the needs of both casual users and serious lawn care enthusiasts.