Snapper LT145H33HBV, LT145H38HBV, LT150H38HKV, WLT145H38HBV Operation

Page 3

IMPORTANT SAFETY INSTRUCTIONS

PREPARATION

(Continued From Previous Page)

7.Keep people and pets out of mowing area. Immediately STOP blades, STOP engine, and STOP machine if anyone enters the area.

8.Check shields, deflectors, switches, blade controls and other safety devices frequently for proper operation and location.

9.Make sure all safety decals are clearly legible. Replace if damaged.

10.Protect yourself when mowing and wear safety glasses, long pants and substantial footwear.

11.Know how to STOP blades and engine quickly in preparation for emergencies.

12.Use extra care when loading or unloading the machine into a trailer or truck.

13.Check grass catcher components frequently for signs of wear or deterioration and replace as needed to prevent injury from thrown objects going through weak or worn spots.

OPERATION

1.Mount and dismount machine from left side.

2.Start engine from operator's seat, if possible. Make sure blades are OFF and parking brake is set.

3.DO NOT leave machine with engine running. STOP engine, STOP blades, SET brake, and Remove key before leaving operators position of any reason.

4.DO NOT operate machine unless properly seated with feet on feet rests or pedal(s).

5.STOP BLADES and ENGINE and make sure blades have stopped before removing grass catcher or unclogging mower to prevent loss of fingers or hand.

6.Blades must be OFF except when cutting grass. Set blades in highest position when mowing over rough ground.

7.Keep hands and feet away from rotating blades underneath deck. DO NOT place foot on ground while BLADES are ON or machine is in motion.

8.DO NOT operate machine without entire grass catcher or guards in place. DO NOT point discharge at people, passing cars, windows or doors.

9.Slow down before turning.

10.Watch out for traffic when near or crossing roadways.

11.STOP engine immediately after striking an obstruction. Inspect machine and repair damage before resuming operation.

12.Operate machine only in daylight or with good artificial light.

13.Move joystick (if equipped) SLOWLY to maintain control during speed and directional changes.

OPERATION

(Continued From Previous Column)

14.Exercise CAUTION when pulling loads. Limit loads to those you can safely control and attach loads to hitch plate as specified with SNAPPER attachment instructions.

15.DO NOT operate engine in enclosed areas. Engine exhaust gases contain carbon monoxide, a deadly poison.

MAINTENANCE

1.DO NOT store machine or fuel container inside where fumes may reach an open flame, spark or pilot light such as in a water heater, furnace, clothes dryer or other gas appliance. Allow engine to cool before storing machine in an enclosure. Store fuel container out of the reach of children in a well ventilated, unoccupied building.

2.Keep engine free of grass, leaves or excess grease to reduce fire hazard and engine overheating.

3.When draining fuel tank, drain fuel into an approved container outdoors and away from open flame.

4.Check brakes frequently; adjust, repair or replace as needed.

5.Keep all bolts, nuts and screws properly tight. Check that all cotter pins are in proper position.

6.Always provide adequate ventilation when running engine. Exhaust gases contain carbon monoxide, an odorless and deadly poison.

7.Disconnect negative (black) cable from battery before performing maintenance or service. Cranking engine could cause injury.

8.DO NOT work under machine without safety blocks.

9.Service engine and make adjustments only when engine is stopped. Remove spark plug wire(s) from spark plug(s) and secure wire(s) away from spark plug(s).

10.DO NOT change engine governor speed settings or overspeed engine.

11.Lubricate machine at intervals specified in manual to prevent controls from binding.

12.Mower blades are sharp and can cut. Wrap the blades or wear heavy leather gloves and use CAUTION when handling them.

13.DO NOT test for spark by grounding spark plug next to spark plug hole; spark plug could ignite gas exiting engine.

14.Have machine serviced by an authorized SNAPPER dealer at least once a year and have the dealer install any new safety devices.

15.Use only genuine SNAPPER replacement parts to assure that original standards are maintained.

16.If battery is removed, DO NOT operate engine without insulating Positive + battery cable terminal with electrical tape, or sparking from the battery cables can result.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Model Number Explanation Lawn Tractor Hydrostatic Drive Series HImportant Safety Instructions Operation Table of Contents Controls ComponentsOPERATOR’S Seat Adjustment Front to Rear Adjustment PRE-START ChecklistOFF Starting & Operation Starting EngineStarting & Operation 2.3.2. Starting Wheel Drive Starting Mower BladeStopping Wheel Drive Releasing Park Brake Setting Park BrakeCutting Height Adjustment Stopping Stopping Mower BladeRolling Tractor with Engine OFF 2.6.1. Rolling Hydro Models Reverse Lockout Mechanism Override Reverse Lockout MechanismCheck Blade Brake Service After First 5 HoursIntroduction Change Engine OILCheck 38 Deck Drive Belt Service Every 25 Operating HoursCheck Engine Check 33 Deck Drive BeltTractor Lubrication Fuel Filter Service AnnuallyService Annually 3.4.2. Fuel Filter From PreviousSpark Plug Hydrostatic Transmission OIL Engine Adjustments & Repair Blade Brake AdjustmentDeck Blade Brake Adjustment Blade Belt Adjustment 33 Deck Blade Belt Adjustment 38 DeckOn next Side View of Deck Adjusting Mower Blade 33 Deck from previousDeck Level Adjustment Side to Side Deck Level Adjustment Front to Rear Sector PlatesDeck Level Adjustment Front to Rear Front Lift ROD Front of Tractor Deck Level Adjustment Front to Rear Tractor Drive Components Brake AdjustmentRear to Front View of Deck Shifter Adjustment Steering AdjustmentMounting Ninja Blade Sharpening Mower Blade Service Standard Blade Wear LimitsNinja Blade Wear Limits Standard Blade SharpeningTraction Drive Belt Replacement Mower Deck Removal Mower Blade ReplacementTraction drive belt removal View from Underneath Tractor Traction drive belt replacementDeck Drive Belt Battery Storage Battery Battery RemovalBattery Installation Battery ServiceNEW Battery Preparation Battery TestingAvailable Accessories Schematic Wiring Harness P.N Schematic Wiring Harness P.N LT150H38HKVLT145H33HBV & LT145H38HBV Troubleshooting Guide Troubleshooting Guide LT145H38HBV Tractor Drive Belts Mower BladesNinja LT145H33HBVYear Limited Warranty Primary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Service Notes Service Notes Lawn Tractor Hydrostatic Drive Series H

LT145H33HBV, LT145H38HBV, LT150H38HKV, WLT145H38HBV specifications

The Snapper LT145H33HBV, LT145H38HBV, LT150H38HKV, and WLT145H38HBV are versatile lawn tractors designed to deliver exceptional performance and efficiency for homeowners and professionals alike. Each model incorporates a host of features and technologies that enhance usability and mowing capabilities.

Starting with the LT145H33HBV, this model is equipped with a powerful Briggs & Stratton engine, providing reliable performance for handling various lawn care tasks. Its 33-inch cutting deck offers maneuverability, making it ideal for smaller to medium-sized yards. The LT145H33HBV also features an automatic transmission that allows for smooth and easy speed adjustments, promoting a more comfortable mowing experience. Its adjustable seat provides additional comfort during longer mowing sessions, and the sturdy construction ensures durability and longevity in outdoor conditions.

The LT145H38HBV model builds upon the foundation of the LT145H33HBV, but it comes with a larger 38-inch cutting deck, which is perfect for tackling larger lawns more efficiently. Like the LT145H33HBV, it features a reliable Briggs & Stratton engine, ensuring powerful performance. The LT145H38HBV is also equipped with Snapper’s proprietary Smart Speed technology, allowing users to easily switch between different speed settings, enabling precision control while navigating around obstacles.

On to the LT150H38HKV, this model offers even more power and features. With a robust 150cc engine and a 38-inch cutting width, it balances power and size perfectly. The LT150H38HKV also includes a high-back seat for enhanced comfort and support. Furthermore, this model integrates integrated mulching capabilities, letting users maintain their lawns effectively by returning valuable nutrients back to the soil. The easy-to-use cutting height adjustment system ensures users can achieve the desired grass length with minimal hassle.

Lastly, the WLT145H38HBV combines innovative technology with user-friendly design. This model stands out with its exceptional maneuverability due to its compact size. The 38-inch cutting deck expertly handles various terrains, making it a great choice for gardens with tight spaces. It incorporates a reinforced deck for added strength and longevity. Additionally, the WLT145H38HBV is designed with a comfortable steering wheel and ergonomic controls, ensuring that users can enjoy a seamless mowing experience.

In summary, Snapper's LT145H33HBV, LT145H38HBV, LT150H38HKV, and WLT145H38HBV models are not only equipped with powerful engines and durable cutting decks but also feature technologies that promote user comfort and cutting efficiency. With versatile options suitable for a range of lawn sizes, these tractors are designed to meet the needs of both casual users and serious lawn care enthusiasts.
Top Page Image Contents