Snapper RP2167517BVE important safety instructions Components immediately

Page 11

Section 2 -OPERATING INSTRUCTIONS

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade.Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficienttime forallcomponents to cool.

2.10INSTALLATION of DISCHARGE DEFLECTOR

(Optional accessory on some models)

Install discharge deflector if discharging is desired.

Grass Bag and Bag Adapter or Recycling Cover must be removed.

1.Remove front and rear nuts that secure Bag Adapter or Recycling Cover to deck. Refer to sections concerning these parts.

2.Install discharge deflector and secure to deck using hardware removed in Step 1. Slot in front edge of discharge deflector must be under nut as shown and both bolts protruding through holes in the side of the deflector. See Figure 2.18.

INSTALL

SLIDE

DISCHARGE

DEFLECTOR SLOT

DEFLECTOR

UNDER NUT

2.11INSTALLATION of RECYCLING COVER (Optional Accessory on Some Models)

It will be necessary to remove bag adapter and grass bag or discharge deflector before installing recycling cover. See previous section for instructions. Install the recycling cover and secure to the side and top of the deck with the two nuts provided on the machine. Slide top portion of cover under nut secured to the deck. See Figure 2.19.

RECYCLING

COVER

ATTACH RECYCLING

COVER TO THE DECK

WITH TWO NUTS

FIGURE 2.19

INSTALL

FIGURE 2.18

WARNINGL

DO NOT operate without entireGrass Catcher or guard in place. Grass Catcher components are subject to deteriorationduring normal use. Inspect frequently and replace worn or damaged

components immediately.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 8NAPPERo McDonough, GA., 30253 U.S.A Engine Designation Series Designation Engine Horse PowerImportant Safety Instructions Operation Table of Contents Control BriggsEngine SpeedPrimer Models PRE-START Check ListStarting & Operation Engine & Blade Stopping Starting & Operation 2.2.1. Engine & BladePropelling Mower Cutting Height Adjustment Handle Height AdjustmentOn Next Recycling OperationRemoving and Dumping Grass Catcher Installation of Grass Catcher Slide Closure TypeComponents immediately Important Drain fuel tank before tipping machine Service After First 5 Hours 3.2.1. Change Engine OILIntroduction Check Mower Blade Service -ANNUALLYStorage Procedure Important Drain fuel tank before tipping mower. do1.A. Ninja Blade Wear Limit Mower Blade ReplacementStandard Blade Wear Limit Blade SharpeningWheel Drive Control Adjustment Driven Disc Adjustment Driven and Drive Disc ServiceCleaning Drive Disc & Driven Disc Drive Spring Repair/ReplacementReplacing Rubber Driven Disc Repair & Adjustments Engine Drive Belt Replacement Stretch Type Belts Replacement Of Bearing On Pulley End Hex ShaftBelt Service Important 1 The square shoulder of the drive Transmission Poly-V Belt ReplacementPulley Position Syringe Hydrometer Digital Voltmeter Battery Service NEW Battery PreparationBattery Storage Battery TestingTroubleshooting HRS HRS HRS Season Service Performed Each USE HRSMAINTENANCE/REPLACEMENT Parts Disclaimer of Warranty Year Limited WarrantyVs.DIRT That dirt will Cost YOU MoneyCheck OIL Level Before Each START-UP Spark plug Starting Check USTSnapper Product Registration Form Page Page Page Snapper McDonough, GA., 30253 U.S.A Steel Deck Walk Behind Mowers Series

RP2167517BVE specifications

The Snapper RP2167517BVE is a versatile and powerful riding mower, engineered for homeowners seeking efficiency and comfort in lawn care. Designed with a 21 horsepower Briggs & Stratton engine, this mower provides more than just power; it boasts exceptional reliability, ensuring a consistent performance on various terrains. One of its standout features is the professional-grade, 42-inch dual-blade cutting deck, which allows for precise cutting and an impressive turnaround radius that enhances maneuverability around your yard.

Equipped with a unique hydrostatic transmission, the RP2167517BVE offers seamless speed control and smooth handling, allowing users to easily navigate tricky landscapes. The foot-operated automatic transmission provides the rider with the ability to accelerate or decelerate without the complexity of manual shifting. This means that mowing becomes less of a chore and more of an enjoyable task, even in larger properties.

Comfort is a major highlight of the Snapper RP2167517BVE. It comes with an adjustable high-back seat designed to reduce fatigue during extended mowing sessions. The position is customizable to suit different user preferences, allowing for an ergonomic driving experience. Furthermore, the intuitive control panel places essential functions within easy reach, making it straightforward to operate.

In addition to these features, the RP2167517BVE is compatible with various attachments, including baggers, mulchers, and snow blades, making it a multi-season workhorse for lawn and garden maintenance. The sturdy build of the mower is complemented by robust safety features, such as an automatic engine shut-off when the operator leaves the seat.

Another technological advantage of the Snapper RP2167517BVE is its tough construction, featuring a welded steel frame that stands up to rigorous use. The mower is also designed for easy maintenance, with access points that allow for quick cleaning of the deck and adjustments.

Overall, the Snapper RP2167517BVE combines power, comfort, and advanced technology to provide a superior mowing experience. Whether tending to a sprawling lawn or navigating tight spaces, this riding mower delivers performance and reliability that meet the demands of any homeowner.
Top Page Image Contents