Snapper SPLH141KWE SP520 Truarc #5133-50, Except Kohler 23HP, Used on Kohler 23HP, Kohler 15HP

LOOP HANDLE & CONTROL ASSEMBLIES

Item	Part No	Qty	Description	Note
1	7011138	1	IGNITION KEY, Pair
2	7012685	1	NUT, 5/8-32 Hex (Ignition Switch)
3	7012686	1	NUT, 1/2-27 Hex (Special)
4	7014341	2	RETAINING RING	Truarc #5133-50
5	7017817	1	SWITCH, Ignition, 2-Pole, Recoil Start	(except Kohler 23HP)
5	7027698	1	SWITCH, Ignition	used on Kohler 23HP
6	7022166	1	ROD, Pivot, 1/2” Dia. x 18.542 w/2 retaining Ring Grooves
7	7027141	2	SWIVEL
8	7027225	1	SWITCH, OPC, Single Pole (NC)	used on Loop Handle except
				Kohler 23HP
8	7023355	1	SWITCH, OPC, (NO/NC)	used on Kohler 18HP
9	7028856	2	CONTROL ROD (Traction)
10	7028857	4	BEARING, Nyliner
11	7074648	1	ROD, Operator Presence Control
12	7029139	1	SPRING, OPC- Loop Handle
13	7029715	1	SWITCH, Toggle
14	7034827	1	PANEL, Left
15	7034828	1	PANEL, Right
16	7041748	1	BAIL, Operator Presence Control (Weldment)
17	7091303	4	BOLT, 5/16-18 x 1” Short Neck Carriage, GR 5
18	7090977	2	NUT, 1/4-20 Hex Jam
19	7091222	2	BOLT, 1/4-20 x 1-3/4” Hex Head Cap, GR 5
20	7091030	2	BUSHING, 1/2” Machine
21	7091122	8	SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap
22	7091297	2	NUT, 5/16-24 Hex, GR 5
23	7091299	4	NUT, 3/8-16 Hex Nyloc
24	7077873	2	SCREW, #12-14 x 1/2” Hex Flange Self-Tap
25	7091594	2	COTTER PIN, 1/2” Self-Locking
26	7091686	2	SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap
27	7034820	1	WELDMENT, Traction Lever, RH
28	7034821	1	WELDMENT, Traction Lever, LH
29	7043869	1	HANDLE, Loop (Weldment)
30	7029100	1	THROTTLE CONTROL, 40.50/1.46	used on Kawasaki 14HP &
				Kohler 15HP
30	7072597	1	THROTTLE CONTROL, 51.50/0.90	used on Kawasaki 17HP
30	7036431	1	THROTTLE CONTROL, 48.50/0.90	used on Kohler 23HP
31	7012080	4	CABLE TIE, 7”
32	7073118	1	* WIRE HARNESS	not shown; for all models except
				for Kohler 23HP
32	7073117	1	* WIRE HARNESS	not shown; used on Kohler 23HP

Footnotes:

NOTE: * See Electrical Wiring pages for Illustration.

PRO HYDRO		Manual No. 7006928
SERIES 1 & 2	5	TP 400-5023-4-CW-N