Snapper MR216017B important safety instructions Operating Instructions

Section 2 - OPERATING INSTRUCTIONS

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

2.8INSTALLATION of GRASS BAG (Continued From Previous Page) (Door Type, Optional Accessory)

Attach grass bag hooks over middle handle cross bar. See Figure 2.10.

B. Position grass bag between handles. See Figure

2.12.Install grass bag by sliding connector over flange of adapter. Attach grass bag hooks over middle handle cross bar. See Figure 2.13.

LOWER HANDLES

HANDLE

BAG CONNECTOR

ATTACH BAG HOOKS OVER MIDDLE HANDLE CROSS BAR

MIDDLE HANDLE CROSS BAR

ADAPTER

FLANGE

FIGURE 2.12

FIGURE 2.10

2.9INSTALLATION of GRASS BAG

(Slide Closure Type, Optional Accessory on Some Models)

Install grass bag as shown. Adapter must be installed first, before grass bag can be installed.

A. Install the top wire to the grass bag. Tie the bag slider to the top wire. Fold bag opening into a "Z" and pull bag into slider. See Figure 2.11.

BAG

SLIDER

“Z” FOLD BAG AS SHOWN

HOOK BAG HANDLE

OVER LOWER

HANDLES

SLIDE CONNECTOR

OVER END OF

ADAPTER FLANGE

FIGURE 2.13

WARNING

DO NOT operate without entire Grass Bag or guard in place. Grass Bag components are subject to deterioration during normal use. Inspect frequently and replace worn or damaged components immediately.

FIGURE 2.11

10