Snapper MR216017B important safety instructions Operation

Page 3

IMPORTANT SAFETY INSTRUCTIONS

SAFE HANDLING OF GASOLINE

(Continued From Previous Page)

3.DO NOT remove fuel cap or add fuel with the engine running. Allow the engine to cool before refueling.

4.DO NOT refuel the machine indoors.

5.DO NOT store the machine or fuel container inside where there is an open flame, spark or pilot light such as on a water heater or other appliances.

6.DO NOT fill fuel containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place the containers on the ground away from the vehicle before filling.

7.Remove gas-powered equipment from the vehicle or trailer and refuel it on the ground. If this is not possible, then refuel equipment using a portable container, rather than a gasoline dispenser nozzle.

8.DO NOT start gas powered equipment in enclosed vehicles or trailers.

9.Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. DO NOT use a nozzle lock- open device

10.If fuel is spilled on clothing, change clothing immediately.

11.Never overfill a fuel tank. Replace fuel cap and tighten securely.

OPERATION

1.DO NOT put hands or feet near or under rotating parts. Keep clear of discharge area while engine is running.

2.STOP engine when crossing gravel drives, walks, or roads, and under any conditions where thrown objects might be a hazard.

3.Mow only in daylight or good artificial light.

4.DO NOT operate mower while under the influence of alcohol or drugs.

5.After striking a foreign object or if mower vibrates abnormally, STOP the engine, disconnect and secure spark plug wire. Inspect the mower for any damage and repair the damage.

6.DO NOT mow near drop offs, ditches or embankments. Operator could lose footing or balance.

7.STAY ALERT for holes and other hidden hazards. Tall grass can hide obstacles. Keep away from ditches, washouts, culverts, fences and protruding objects.

8.DO NOT mow on wet grass. Always be sure of your footing. Keep a firm hold on the handle and walk, never run. Slipping could cause injury.

3

OPERATION

(Continued From Previous Column)

9.DO NOT leave the machine with the engine running. STOP BLADE and STOP ENGINE before leaving the operators position for any reason.

10.Before cleaning, repairing or inspecting make certain engine, blade and all moving parts have STOPPED. Disconnect and secure spark plug wire away from plug to prevent accidental starting.

11.STOP engine and wait until the blade comes to complete STOP before removing grass bag and/or clearing grass.

12.DO NOT operate mower without the entire grass catcher or guards in place. DO NOT point discharge at people, passing cars, windows or doors.

13.Slow down before turning.

14.Watch out for traffic when near or crossing roadways.

15.DO NOT operate engine in enclosed areas. Engine exhaust gases contain carbon monoxide, a deadly poison.

MAINTENANCE AND STORAGE

1.DO NOT store mower or fuel container inside where fumes may reach an open flame, spark or pilot light such as in a water heater, furnace, clothes dryer or other gas appliance. Allow engine to cool before storing machine in an enclosure. Store fuel container out of reach of children in a well ventilated, unoccupied building.

2.Keep mower and engine free of grass, leaves or excess grease to reduce fire hazard and engine overheating.

3.When draining fuel tank, drain fuel into an approved container outdoors and away from open flame.

4.Keep all bolts, especially blade bolts, nuts and screws properly tight. Check that all cotter pins are in proper position.

5.Always provide adequate ventilation when running engine. Engine exhaust gases contain carbon monoxide, a deadly poison.

6.Service engine and make adjustments only when engine is stopped. Removed spark plug wire from spark plug and secure wire away from spark plug to prevent accidental starting.

7.DO NOT change engine governor speed settings or overspeed engine.

8.Check grass bag assembly frequently for wear or deterioration to avoid thrown objects and exposure to moving parts. Replace with new bag if loose seams or tears are evident. Replace slider or bag adapter if broken or cracked.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Steel Deck Walk Mowers M Model Series Important Safety Instructions Operation Important Safety Instructions Table of Contents Nomenclature IntroductionStarting & Operation 2.2.1. Engine & Blade PRE-START Check ListStopping Handle Height AdjustmentCutting Height Adjustment Starting & OperationRecycling Operation Installation of Grass BAG Door Type, Optional AccessoryOperating Instructions Remove Grass BAG From Handle BAG Adapter Remove Nuts On Next Service After First 5 Hours 3.2.1. Change Engine OILImportant Drain fuel tank before tipping mower Check Grease Level in TransmissionCheck Engine Drive Belt Service AnnuallyStorage Procedure Check Mower BladeMower Blade Replacement 4.1.1. Standard Blade Wear Limit Blade SharpeningNinja Blade Wear Limit Wheel Drive Control Adjustment Driven Disc Adjustment Driven and Drive Disc ServiceCleaning Drive Disc & Driven Disc Drive Spring Repair/ReplacementReplacing Rubber Driven Disc Driven Disc Assembly Install NEW Snap Rings Engine Drive Belt Replacement Stretch Type Belts Belt ServicePulley Position Transmission Poly-V Belt ReplacementProblem Probable Cause Corrective Action Troubleshooting100 Service Performed EachClean Sponge Element Engine Manual MAINTENANCE/REPLACEMENT PartsDisclaimer of Warranty Year Limited WarrantySnapper Product Registration Form Primary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Page Page Page Steel Deck Walk Behind Mowers M Model Series
Related manuals
Manual 46 pages 20.32 Kb

MR216017B specifications

The Snapper MR216017B is a robust and reliable lawn mower designed for homeowners seeking an efficient and effective way to maintain their lawns. This particular model stands out with a variety of features and technologies that enhance its performance and user-friendliness, making it an ideal choice for both novice and experienced gardeners.

One of the key features of the Snapper MR216017B is its powerful 163cc engine. This engine ensures consistent power and reliable starting, which is essential for tackling various types of grass and terrain. The self-propelled feature is another significant advantage, as it allows users to effortlessly navigate through their lawns without excessive physical exertion. This is particularly beneficial for larger properties or those with uneven ground.

The cutting deck of the Snapper MR216017B is designed for superior performance. With a 21-inch steel deck, it provides a wide cutting path that allows for faster mowing. The durable construction of the deck ensures longevity and resistance against wear and tear. Additionally, the mower comes with a 3-in-1 cutting system, which means it offers mulching, bagging, and side discharge options. This versatility enables users to select the best cutting method for their lawn care needs.

User comfort and convenience are also prioritized in the design of the Snapper MR216017B. It features an ergonomic handle that can be adjusted to multiple heights, accommodating various user preferences and ensuring a comfortable grip during operation. The readily accessible controls make it easy to switch between the different mowing modes and adjust the cutting height, allowing for customization based on grass length and type.

Moreover, the Snapper MR216017B incorporates innovative technologies that enhance its overall functionality. The mower's signature “Easy Start” system simplifies the starting process, reducing the hassle often associated with traditional mowers. The rear-wheel drive offers improved traction and maneuverability, especially on hilly or challenging terrains.

In summary, the Snapper MR216017B is equipped with a powerful engine, a versatile 3-in-1 cutting system, and features that enhance user comfort and convenience. With its durable construction and innovative technologies, this mower stands out as a reliable tool for maintaining a pristine lawn. Whether you are a seasoned landscaper or a first-time mower user, the Snapper MR216017B is designed to meet your lawn care needs effectively and efficiently.
Top Page Image Contents