Snapper MR216017B Recycling Operation, Installation of Grass BAG Door Type, Optional Accessory

Page 9

Section 2 - OPERATING INSTRUCTIONS

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

2.6 RECYCLING OPERATION

NOTE: For best recycling results, cut up to a maximum of 1/3 of grass blade length and recycle ONLY when grass is dry.

1.Set all wheels in the highest cutting position (Notch 6).

2.Move engine speed control to “FAST” (Rabbit) position.

3.Move ground speed control to slowest speed setting.

4.Proceed mowing slowly. If grass is very dense, lower each rear wheel latch one notch lower than the front wheel latches to improve recycling performance.

INSTALLATION of GRASS BAG ADAPTER (Optional Accessory on Some Models)

STEP 1: Install the grass bag adapter and secure to the side and top of the deck with the two nuts provided with the machine. Slot in front edge of adapter must be under nut located on top of deck. See Figure 2.7.

SECURE ADAPTER

TO DECK WITH NUTS

SECURE

WITH NUTS

ADAPTER

FIGURE 2.7

INSTALLATION of RECYCLING PLUG (Optional Accessory on Some Models)

STEP 1: Once adapter has been installed, recycling may be desired. Insert recycling plug completely and securely into adapter. Install grass bag. See Figure 2.8.

INSERT RECYCLING PLUG

PLUGCOMPLETELY AND SECURELY INTO ADAPTER. INSTALL GRASS BAG.

ADAPTER

FIGURE 2.8

2.7INSTALLATION of GRASS BAG (Door Type, Optional Accessory)

Install grass bag by sliding connector over flange of bag adapter. See Figure 2.9.

POSITION BAG

BETWEEN HANDLES

SLIDE

CONNECTOR

CONNECTOR DOWN OVER BAG

ADAPTER FLANGE

BAG

ADAPTER

FIGURE 2.9

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Steel Deck Walk Mowers M Model Series Important Safety Instructions Operation Important Safety Instructions Table of Contents Nomenclature IntroductionStarting & Operation 2.2.1. Engine & Blade PRE-START Check ListCutting Height Adjustment Handle Height AdjustmentStarting & Operation StoppingRecycling Operation Installation of Grass BAG Door Type, Optional AccessoryOperating Instructions Remove Grass BAG From Handle BAG Adapter Remove Nuts Important Drain fuel tank before tipping mower Service After First 5 Hours 3.2.1. Change Engine OILCheck Grease Level in Transmission On NextStorage Procedure Service AnnuallyCheck Mower Blade Check Engine Drive BeltMower Blade Replacement 4.1.1. Standard Blade Wear Limit Blade SharpeningNinja Blade Wear Limit Wheel Drive Control Adjustment Cleaning Drive Disc & Driven Disc Driven and Drive Disc ServiceDrive Spring Repair/Replacement Driven Disc AdjustmentReplacing Rubber Driven Disc Driven Disc Assembly Install NEW Snap Rings Engine Drive Belt Replacement Stretch Type Belts Belt ServicePulley Position Transmission Poly-V Belt ReplacementProblem Probable Cause Corrective Action TroubleshootingClean Sponge Element Engine Manual Service Performed EachMAINTENANCE/REPLACEMENT Parts 100Disclaimer of Warranty Year Limited WarrantySnapper Product Registration Form Primary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Page Page Page Steel Deck Walk Behind Mowers M Model Series
Related manuals
Manual 46 pages 20.32 Kb

MR216017B specifications

The Snapper MR216017B is a robust and reliable lawn mower designed for homeowners seeking an efficient and effective way to maintain their lawns. This particular model stands out with a variety of features and technologies that enhance its performance and user-friendliness, making it an ideal choice for both novice and experienced gardeners.

One of the key features of the Snapper MR216017B is its powerful 163cc engine. This engine ensures consistent power and reliable starting, which is essential for tackling various types of grass and terrain. The self-propelled feature is another significant advantage, as it allows users to effortlessly navigate through their lawns without excessive physical exertion. This is particularly beneficial for larger properties or those with uneven ground.

The cutting deck of the Snapper MR216017B is designed for superior performance. With a 21-inch steel deck, it provides a wide cutting path that allows for faster mowing. The durable construction of the deck ensures longevity and resistance against wear and tear. Additionally, the mower comes with a 3-in-1 cutting system, which means it offers mulching, bagging, and side discharge options. This versatility enables users to select the best cutting method for their lawn care needs.

User comfort and convenience are also prioritized in the design of the Snapper MR216017B. It features an ergonomic handle that can be adjusted to multiple heights, accommodating various user preferences and ensuring a comfortable grip during operation. The readily accessible controls make it easy to switch between the different mowing modes and adjust the cutting height, allowing for customization based on grass length and type.

Moreover, the Snapper MR216017B incorporates innovative technologies that enhance its overall functionality. The mower's signature “Easy Start” system simplifies the starting process, reducing the hassle often associated with traditional mowers. The rear-wheel drive offers improved traction and maneuverability, especially on hilly or challenging terrains.

In summary, the Snapper MR216017B is equipped with a powerful engine, a versatile 3-in-1 cutting system, and features that enhance user comfort and convenience. With its durable construction and innovative technologies, this mower stands out as a reliable tool for maintaining a pristine lawn. Whether you are a seasoned landscaper or a first-time mower user, the Snapper MR216017B is designed to meet your lawn care needs effectively and efficiently.
Top Page Image Contents