Introduction | Snapper ZM6102M, MZM2301KH, ZM5202M, MZM5203M

Section 1 - FAMILIARIZATION

MOTION CONTROL	OPERATOR’S SEAT
MOTION CONTROL
LEVER (JOYSTICK)	FUEL TANK

ENGINE SPEED

AUXILLARYCONTROL

FUEL TANK

CHOKE CONTROL

BLADE
ENGAGEMENT
SWITCH	DECK LIFT LEVER
	DECK LIFT LEVER
KEY SWITCH	FOOTREST
	FOOTREST
PARKING
BRAKE
LEVER

DISCHARGE

DEFLECTOR

FIGURE 1.1

IMPORTANT

The figures and illustrations in this manual are provided for reference only and may differ from your specific model. Contact your Snapper dealer if you have questions

1.1 INTRODUCTION

This manual has been prepared for the operator’s of the SNAPPER MID MOUNT Z-RIDER. Its purpose, aside from recommending standard operating procedures and routine service requirements, is to promote SAFETY through the use of accepted operating practices. Read, Understand and Follow the IMPORTANT SAFETY INSTRUCTIONS on Pages 2 thru 4 of this manual and All SAFETY messages on the MID MOUNT Z-RIDER and its attachments before operating. SNAPPER recommends returning the MID MOUNT Z-RIDER to an authorized SNAPPER dealer annually for inspection and addition of any new devices which might upgrade the safety of the mower.

1.2 NOMENCLATURE

The nomenclature information above, Figure 1.1, shows the essential parts of the SNAPPER MID MOUNT Z- RIDER. It is recommended that all operators of this equipment become thoroughly familiar with the controls, components, and operation of this machine before operating. Specific details involving the engine are found in the separate engine owner’s manual. Study these manuals before operating and keep both handy for future reference. For the nearest SNAPPER dealer in your area, check the yellow pages under the heading LAWN MOWERS. For engine parts and service, look for the engine manufacturer’s dealers under the heading, ENGINES - gasoline.