Snapper ZT3000 manual Hydraulic Pump Drive Belt Replacement, PRY Belts Over Pulleys

Page 18

Simplicity / Snapper ZTR

Hydraulic Pump Drive Belt Replacement

To avoid damaging belts, DO NOT

PRY BELTS OVER PULLEYS.

1.Park the rider on a smooth, level surface such as a concrete floor. Disengage the PTO, engage the parking brake, turn off the engine, and remove the ignition key.

2.Remove the PTO drive belt (see MOWER BELT REPLACEMENT for removal instructions).

3.Loosen the nut towards the front of the machine on the spring anchor hook (H, Figure 25) to release the majority of the belt tension. Use caution and remove the nut to completely release the tension.

4.Remove the old belt and replace it with the new one. Make sure the V-side of the belt runs in the grooves of the crankshaft pulley and pump pulleys (B & C).

5.Reinstall the anchor hook (H) into the anchor tab and loosely fasten the nut. Adjust the spring until a measurement of 9” (22,86 cm) is achieved from the outside of the spring hooks. Tighten nut.

6.Reinstall the PTO drive belt.

B

A

D

E

F

C

C

G

H

Figure 25. Hydraulic Pump Drive Belt Replacement (Shown from Below)

A.Pump Drive Belt

B.Crankshaft Pulley

C.Transmission Pulley

D.Idler Pulleys (stationary)

E.Idler Pulley

F.Idler Arm

G.Spring

H.Spring Anchor Hook

TP 300-7337-01-CH-SMN

18

8/2007

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Dealer Setup Adjustment Instructions Safety Rules Simplicity / Snapper ZTRQuick Setup List Install Battery Battery Activation InstallationCharge Battery UncratingRider Assembly Seat & Safety Switch AssemblyInstall Ground Speed Control Levers Fill & Check Engine Oil Check Fluid LevelsReduce & Check Tire Pressures Check /Fill Transmission OilGrease Oil Torque Mower BladesLubrication Arm PivotBurnish PTO Clutch Perform Safety ChecksSeat Switch Connection Functional TestsTest 3 Engine should Shut OFF if Test 1 Engine should not crank ifTest 2 Engine should crank if Test 4 Blade Brake CheckSeat Adjustments Ground Speed Control Lever AdjustmentOperator Adjustment Return-To-Neutral Neutral Adjustment Simplicity / Snapper ZTR Speed Balancing AdjustmentParking Brake Adjustment Suspension Adjustment Select modelsPTO Clutch Adjustment Blade Brake CheckMower Deck Leveling Orient Blades Front-to-BackRoller Bar Leveling Roller Bar Leveling Eccentric and LocknutTransmission Oil Filter Change Change Interval Every 200 Hours Filter Part NumberHydraulic Pump Drive Belt Replacement PRY Belts Over PulleysMower Belt Replacement Release Belt Tension Belt Tension Lever Guard Notch

ZT3000 specifications

The Snapper ZT3000 is a robust and versatile zero-turn mower designed for homeowners and landscapers seeking efficiency and precision in their lawn care routine. With its powerful engine and user-friendly features, the ZT3000 has quickly become a popular choice among lawn enthusiasts.

One of the standout features of the Snapper ZT3000 is its heavy-duty 11-gauge steel frame, providing durability and stability while navigating various terrains. This construction ensures that the mower can withstand the rigors of frequent use, making it a reliable investment for maintaining large lawns.

The ZT3000 is powered by a reliable Kohler engine, which delivers impressive horsepower and torque. This power enables the mower to tackle tough grass and diverse landscapes with ease. Its responsive acceleration allows operators to swiftly navigate around obstacles, making mowing more efficient and enjoyable. With a top speed of 7 mph, this machine presents a brisk pace for completing mowing tasks in less time.

One of the key features of the Snapper ZT3000 is its patented, foot-operated deck lift, which allows users to adjust the cutting height with ease. This feature enables quick customization of the cutting height from 1.5 inches to 4.5 inches in increments, ensuring a precise cut tailored to the specific needs of your lawn. The mower's wide 42-inch or 52-inch cutting deck not only allows for a larger mowing area but also enhances maneuverability in tight spaces.

Safety is also a priority with the ZT3000. It is equipped with an automatic blade brake system, which stops the blades within seconds when the operator leaves the seat. This feature adds a layer of safety when maneuvering or engaging in tasks outside of mowing.

Additionally, the Snapper ZT3000 offers a comfortable seating experience with an ergonomic high-back seat that minimizes fatigue during extended mowing sessions. The intuitive controls and responsive steering levers provide ease of operation, making it accessible for both novice and experienced users.

In summary, the Snapper ZT3000 combines rugged performance, innovative technology, and user-friendly features. Its powerful engine, durable construction, adjustable cutting height, and safety systems make it an ideal choice for anyone looking to achieve a well-manicured lawn with minimal effort.
Top Page Image Contents