Snapper ZT3000 manual Mower Belt Replacement, Release Belt Tension Belt Tension Lever Guard Notch

Page 19

Simplicity / Snapper ZTR

Mower Belt Replacement

To avoid damaging belts, DO NOT

PRY BELTS OVER PULLEYS.

1.Park the rider on a smooth, level surface such as a concrete floor. Disengage the PTO, engage the parking brake, turn off the engine, and remove the ignition key.

2.Raise the mower deck to transport position. Pull the belt tension lever (A, Figure 27) towards the rear of the machine to release tension on the mower belt. Secure the lever in the guard notch (B).

3.Remove the old drive belt and install the new one as shown in Figure 26. Note that the back of the drive belt must ride against the back-side idler pulleys (B). Use the belt tension lever (A, Figure 26) to release tension on the idler pulley for installation.

A	C
	C
B	A
	A
A
	D

Figure 26. Mower Belt Routing

A.Arbor Pulleys

B.Back-Side Idler Pulleys

C.PTO Pulley

D.Belt Tension Release Lever

Figure 27. Release Belt Tension

A.Belt Tension Lever

B.Guard Notch

8/2007

TP 300-7337-01-CH-SMN

Image 19

Contents Dealer Setup Adjustment Instructions Simplicity / Snapper ZTR Safety RulesQuick Setup List Uncrating Battery Activation InstallationCharge Battery Install BatterySeat & Safety Switch Assembly Rider AssemblyInstall Ground Speed Control Levers Check /Fill Transmission Oil Check Fluid LevelsReduce & Check Tire Pressures Fill & Check Engine OilArm Pivot Torque Mower BladesLubrication Grease OilFunctional Tests Perform Safety ChecksSeat Switch Connection Burnish PTO ClutchTest 4 Blade Brake Check Test 1 Engine should not crank ifTest 2 Engine should crank if Test 3 Engine should Shut OFF ifGround Speed Control Lever Adjustment Seat AdjustmentsOperator Adjustment Simplicity / Snapper ZTR Speed Balancing Adjustment Return-To-Neutral Neutral AdjustmentParking Brake Adjustment Select models Suspension AdjustmentBlade Brake Check PTO Clutch AdjustmentOrient Blades Front-to-Back Mower Deck LevelingRoller Bar Leveling Eccentric and Locknut Roller Bar LevelingChange Interval Every 200 Hours Filter Part Number Transmission Oil Filter ChangePRY Belts Over Pulleys Hydraulic Pump Drive Belt ReplacementRelease Belt Tension Belt Tension Lever Guard Notch Mower Belt Replacement

ZT3000 specifications

The Snapper ZT3000 is a robust and versatile zero-turn mower designed for homeowners and landscapers seeking efficiency and precision in their lawn care routine. With its powerful engine and user-friendly features, the ZT3000 has quickly become a popular choice among lawn enthusiasts.

One of the standout features of the Snapper ZT3000 is its heavy-duty 11-gauge steel frame, providing durability and stability while navigating various terrains. This construction ensures that the mower can withstand the rigors of frequent use, making it a reliable investment for maintaining large lawns.

The ZT3000 is powered by a reliable Kohler engine, which delivers impressive horsepower and torque. This power enables the mower to tackle tough grass and diverse landscapes with ease. Its responsive acceleration allows operators to swiftly navigate around obstacles, making mowing more efficient and enjoyable. With a top speed of 7 mph, this machine presents a brisk pace for completing mowing tasks in less time.

One of the key features of the Snapper ZT3000 is its patented, foot-operated deck lift, which allows users to adjust the cutting height with ease. This feature enables quick customization of the cutting height from 1.5 inches to 4.5 inches in increments, ensuring a precise cut tailored to the specific needs of your lawn. The mower's wide 42-inch or 52-inch cutting deck not only allows for a larger mowing area but also enhances maneuverability in tight spaces.

Safety is also a priority with the ZT3000. It is equipped with an automatic blade brake system, which stops the blades within seconds when the operator leaves the seat. This feature adds a layer of safety when maneuvering or engaging in tasks outside of mowing.

Additionally, the Snapper ZT3000 offers a comfortable seating experience with an ergonomic high-back seat that minimizes fatigue during extended mowing sessions. The intuitive controls and responsive steering levers provide ease of operation, making it accessible for both novice and experienced users.

In summary, the Snapper ZT3000 combines rugged performance, innovative technology, and user-friendly features. Its powerful engine, durable construction, adjustable cutting height, and safety systems make it an ideal choice for anyone looking to achieve a well-manicured lawn with minimal effort.