Snapper ZT3000 manual Perform Safety Checks, Burnish PTO Clutch, Functional Tests

Page 8

Simplicity / Snapper ZTR

Perform

Safety Checks

WARNING

Disengage the PTO, stop the engine, set the parking brake, and wait for moving parts to stop before leaving operator's position for any reason.

If the unit does not pass the test, do not operate it. Under no circumstance should you attempt to defeat the purpose of the safety system.

Burnish PTO Clutch

1.Select a safe area to operate the mower deck. With the ground speed control levers in the neutral position, the parking brake engaged, the PTO switch disengaged, and an operator in the seat, start the tractor engine. Run the engine at full throttle.

2.Engage the PTO switch and run the deck for fifteen seconds. Disengage the PTO switch and wait for the mower drive belt to stop.

3.Repeat step 2 above ten times, and then re-check the mower blade stopping time. (Stopping time must be five seconds or less.)

Functional Tests

1.Check for loose bolts, screws, nuts, etc.

2.Start the engine and check all controls for proper operation: ground speed control levers, parking brake lever, throttle and choke cables, electric PTO clutch, attachment lift, etc.

3.Stop the engine and check for fluid leaks: oil, gasoline, or transmission oil.

4.If any control fails to operate properly during testing or seems to be out of adjustment, check and readjust it according to the following Adjustments section.

4. Turn the key to OFF to end testing.

Mower Blade Stopping Check

Mower blades and mower drive belt should come to a complete stop within five seconds after the electric clutch switch is turned off.

With the ground speed control levers in the neutral position, the parking brake engaged, the PTO clutch switch disengaged, and an operator in the seat, start the tractor engine. Run the engine at full throttle. Engage the PTO clutch switch and wait several seconds. Disengage the PTO clutch switch and check the time it takes for the mower drive belt to stop. If the mower drive belt does not stop within five seconds, adjust the PTO clutch according to the instructions in the PTO Clutch Adjustment section.

Seat Switch Connection

Check that the seat switch wire harness (D, Figure 2) is connected to the seat switch.

TP 300-7337-01-CH-SMN

8

8/2007

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Dealer Setup Adjustment Instructions Safety Rules Simplicity / Snapper ZTRQuick Setup List Battery Activation Installation Charge BatteryInstall Battery UncratingInstall Ground Speed Control Levers Rider AssemblySeat & Safety Switch Assembly Check Fluid Levels Reduce & Check Tire PressuresFill & Check Engine Oil Check /Fill Transmission OilTorque Mower Blades LubricationGrease Oil Arm PivotPerform Safety Checks Seat Switch ConnectionBurnish PTO Clutch Functional TestsTest 1 Engine should not crank if Test 2 Engine should crank ifTest 3 Engine should Shut OFF if Test 4 Blade Brake CheckOperator Adjustment Seat AdjustmentsGround Speed Control Lever Adjustment Return-To-Neutral Neutral Adjustment Simplicity / Snapper ZTR Speed Balancing AdjustmentParking Brake Adjustment Suspension Adjustment Select modelsPTO Clutch Adjustment Blade Brake CheckMower Deck Leveling Orient Blades Front-to-BackRoller Bar Leveling Roller Bar Leveling Eccentric and LocknutTransmission Oil Filter Change Change Interval Every 200 Hours Filter Part NumberHydraulic Pump Drive Belt Replacement PRY Belts Over PulleysMower Belt Replacement Release Belt Tension Belt Tension Lever Guard Notch

ZT3000 specifications

The Snapper ZT3000 is a robust and versatile zero-turn mower designed for homeowners and landscapers seeking efficiency and precision in their lawn care routine. With its powerful engine and user-friendly features, the ZT3000 has quickly become a popular choice among lawn enthusiasts.

One of the standout features of the Snapper ZT3000 is its heavy-duty 11-gauge steel frame, providing durability and stability while navigating various terrains. This construction ensures that the mower can withstand the rigors of frequent use, making it a reliable investment for maintaining large lawns.

The ZT3000 is powered by a reliable Kohler engine, which delivers impressive horsepower and torque. This power enables the mower to tackle tough grass and diverse landscapes with ease. Its responsive acceleration allows operators to swiftly navigate around obstacles, making mowing more efficient and enjoyable. With a top speed of 7 mph, this machine presents a brisk pace for completing mowing tasks in less time.

One of the key features of the Snapper ZT3000 is its patented, foot-operated deck lift, which allows users to adjust the cutting height with ease. This feature enables quick customization of the cutting height from 1.5 inches to 4.5 inches in increments, ensuring a precise cut tailored to the specific needs of your lawn. The mower's wide 42-inch or 52-inch cutting deck not only allows for a larger mowing area but also enhances maneuverability in tight spaces.

Safety is also a priority with the ZT3000. It is equipped with an automatic blade brake system, which stops the blades within seconds when the operator leaves the seat. This feature adds a layer of safety when maneuvering or engaging in tasks outside of mowing.

Additionally, the Snapper ZT3000 offers a comfortable seating experience with an ergonomic high-back seat that minimizes fatigue during extended mowing sessions. The intuitive controls and responsive steering levers provide ease of operation, making it accessible for both novice and experienced users.

In summary, the Snapper ZT3000 combines rugged performance, innovative technology, and user-friendly features. Its powerful engine, durable construction, adjustable cutting height, and safety systems make it an ideal choice for anyone looking to achieve a well-manicured lawn with minimal effort.
Top Page Image Contents