Snapper NZM25523KWV, NZM27 613KH Tracking Adjustment, Mower Drive Belt Replacement, Belt Removal

Page 11

Section 5 - ADJUSTMENTS & REPAIR

5.6TRACKING ADJUSTMENT

If the machine does not track straight when the Motion Control Levers are in the maximum forward

speed position, perform the following adjustment. Rear tire pressure must be set to 12 PSi before making this adjustment.

1.Loosen bolts that secure adjustment plates and slide plates all the way forward. Retighten bolts.

2.Start machine and drive in smooth flat open area at maximum forward speed.

3.If machine tracks to the right, loosen bolts that secure the left adjustment plate. Move plate rearward to slow the left wheel. Retighten bolts.

4.If machine tracks to the left, loosen bolts that secure the right adjustment plate. Move plate rearward to slow the right wheel down. Retighten bolts. See Figure 5.12.

5.Drive machine again. Repeat adjustment as necessary until machine tracks straight.

LOOSEN BOLTS.

SLIDE PLATE TO

MAKE MACHINE

TRACK STRAIGHT

5.7MOWER DRIVE BELT REPLACEMENT

Inspect mower drive belt. Replace belt if it shows signs of excessive wear, damage and/or is broken.

5.7.1.BELT REMOVAL

1.Remove power unit footrest.

2.The engine to deck belt must be removed before

the deck belt can be removed. Remove engine to deck belt.

3.Disconnect deck belt tension spring.

4.Remove old deck belt. Note the belt routing. See Figure 5.12.

5.7.2.BELT REPLACEMENT

1. The deck belt must be installed first and the

engine to deck belt installed last.

2.Route deck belt around blade pulleys and idler pulley in the same position as old belt was removed. See Figure 5.13.

3.Reconnect idler pulley spring.

4.Reinstall engine to deck belt.

5.Reinstall power unit footrest.

RIGHT

DECK

BELT

ELECTRIC

CLUTCH 7

FIGURE 5.12

ENGINE TO

DECK BELT

LEFT

BELT ROUTING

FIGURE 5.13

24

Image 11
Contents SNAPPER.coonough.,3o2os3 Parking Brake Lever Operation Wear Hearing Protection Safety Messages and SymbolsPull Switch UP to Roll Barprotectivestructuredecalsi PRE-START Check List Operating InstructionsEngine Must not Start if Safety Interlock System Checks2, Stopping Machine Folding the Roll BAR Protective StructureDeck Removal MaintenanceAnnually END of Each Season 2. Fuel FilterNeutral Position Adjustments Adjustments & RepairSection Neutral Position Adjustments Mower Deck & ComponentMower Deck Adjustment Levelness Traction Belt Tension Traction Belt ReplacementBelt Removal Tracking AdjustmentMower Drive Belt Replacement Belt ReplacementBearing Replacement Hydraulic SYSTEM, Purging SNAPPERo.coonouo

NZM21523KWV, NZM19483KWV, NZM25613KWV, NZM25523KWV, NZM27 613KH specifications

The Snapper NZM25523KWV, NZM25613KWV, NZM19483KWV, NZM21523KWV, and NZM27613KH are a series of innovative and high-performance lawn mowers designed to cater to the diverse needs of both residential and commercial users. These models showcase a range of cutting-edge features, technologies, and characteristics, making them stand out in the competitive outdoor power equipment market.

At the heart of these Snapper mowers is their powerful and efficient engine, designed to deliver robust performance while maintaining low emissions. The engines are paired with a reliable drivetrain, ensuring smooth self-propelling capabilities that significantly reduce the effort required for mowing large lawns. Users can select the desired mowing speed to suit their preferences and terrain, providing a customizable mowing experience.

One of the key features across these models is the innovative cutting system. Snapper mowers utilize a three-in-one cutting action, which allows for bagging, mulching, or side discharge of grass clippings. This versatility not only improves convenience but also empowers users to choose the best option for their specific lawn care needs. The finely engineered cutting deck design also ensures an even cut, enhancing the overall appearance of the lawn.

Durability is a hallmark of Snapper products. Each model features a heavy-duty steel construction and a robust deck that can withstand the rigors of frequent use. Users can expect these mowers to provide years of reliable service with minimal maintenance, thanks to their high-quality components and user-friendly design.

These mowers are also designed with ease of use in mind. Features such as an adjustable cutting height allow users to customize their mowing experience, ensuring optimal results for various grass types and conditions. Additionally, the ergonomic handles provide comfort during operation, reducing fatigue for the operator.

The Snapper NZM series also incorporates technological advancements such as easy-start systems for quick ignition and enhanced maneuverability. The compact design of these mowers promotes easy storage and transportability, making them an ideal choice for homeowners with limited space.

In summary, the Snapper NZM25523KWV, NZM25613KWV, NZM19483KWV, NZM21523KWV, and NZM27613KH represent a commitment to quality, efficiency, and versatility in lawn care tools. With their powerful engines, innovative cutting systems, durable construction, and user-friendly features, these mowers are well-equipped to tackle any mowing challenge, ensuring a beautifully manicured lawn every time.