Snapper NZM27 613KH, NZM25523KWV, NZM25613KWV Traction Belt Tension, Traction Belt Replacement

Page 10

Section 5 - ADJUSTMENTS & REPAIR

WARNING

UNHOOK TRACTION

REMOVEANTI-

DRIVE IDLER SPRING

ROTATION BRACKET

DO NOT attempt any maintenance, adjustments or service with engine running. STOP engine. STOP blades. Set brake. Remove key. Remove spark plug wires and secure away from spark plugs. Engine and components are HOT. Avoid serious burns, allow sufficient time for all parts to cool.

5.3TRACTION BELT TENSION

The traction drive belt tension does not require adjustment. If the belts are slipping, they will have to be replaced.

LOCK NUT

J -BOLT

FIGURE 5.9

5.4TRACTION BELT REPLACEMENT

1.Remove clutch to deck belt• See Figure 5.10•

2.Turn lock nut out to the end of J-Bolt, reducing spring tension• Unhook traction idler spring from bolt in frame• See Figure 5.9

3.Remove anti-rotation bracket. See Figure 5.10

4.Disconnect the electric clutch from main wire harness.

5, Remove traction belts from around engine pulley and hydro pumps.

6, Install new belts and route around engine pulley

and hydro pump pulleys.

7, Reconnect electric clutch to main wire harness. 8, Reinstall anti-rotation bracket and tighten nuts securely.

9, Reattach traction idler spring. Run lock nut all the way to the end of the threads on the J-Bolt. See Figure 5.10.

10.Reinstall electric clutch to deck belt onto electric clutch.

REMOVECLUTCH

TO DECK BELT

FIGURE 5.10

5.5BLADE BRAKE/ELECTRIC CLUTCH ADJUSTMENT The blade switch engages the electric clutch when pulled out to the "ON" position• When the blade switch is in the "ON _'position the cutting blade(s) are engaged• The blade switch disengages the electric clutch when the blade switch is pushed in to the "OFF" position. When the blade switch is in the "OFF" position the cutting blade(s) are disengaged. The electric clutch is adjustable• The blades should stop rotation in 7 seconds or less• If the electric clutch fails to stop the blades rotation in

7seconds, adjustment is necessary.

1.Insert a feeler gauge into the three slots on the electric clutch•

2.Check gap through all three slots in the side of the clutch. The gap should be set at .015•

3.If gap is incorrect rotate nuts in or out to achieve

the correct gap. See Figure 5.11.

NOTE: Electric Clutch is shown removed from the machine• Removal is not necessary for adjustment•

GAP SHOULD BE .015

f

H

ROTATE NUTS

IN OR OUT

TO ACHIEVE

CORRECTGAP

FIGURE 5.11

23

Page 9 Page 11
Image 10
Page 9 Page 11
Contents SNAPPER.coonough.,3o2os3 Safety Messages and Symbols Parking Brake Lever Operation Wear Hearing ProtectionPull Switch UP to Roll Barprotectivestructuredecalsi Operating Instructions PRE-START Check ListFolding the Roll BAR Protective Structure Safety Interlock System Checks2, Stopping Machine Engine Must not Start if2. Fuel Filter MaintenanceAnnually END of Each Season Deck RemovalAdjustments & Repair Neutral Position AdjustmentsMower Deck Adjustment Levelness Neutral Position Adjustments Mower Deck & ComponentSection Traction Belt Replacement Traction Belt TensionBelt Replacement Tracking AdjustmentMower Drive Belt Replacement Belt RemovalBearing Replacement Hydraulic SYSTEM, Purging SNAPPERo.coonouo

NZM21523KWV, NZM19483KWV, NZM25613KWV, NZM25523KWV, NZM27 613KH specifications

The Snapper NZM25523KWV, NZM25613KWV, NZM19483KWV, NZM21523KWV, and NZM27613KH are a series of innovative and high-performance lawn mowers designed to cater to the diverse needs of both residential and commercial users. These models showcase a range of cutting-edge features, technologies, and characteristics, making them stand out in the competitive outdoor power equipment market.

At the heart of these Snapper mowers is their powerful and efficient engine, designed to deliver robust performance while maintaining low emissions. The engines are paired with a reliable drivetrain, ensuring smooth self-propelling capabilities that significantly reduce the effort required for mowing large lawns. Users can select the desired mowing speed to suit their preferences and terrain, providing a customizable mowing experience.

One of the key features across these models is the innovative cutting system. Snapper mowers utilize a three-in-one cutting action, which allows for bagging, mulching, or side discharge of grass clippings. This versatility not only improves convenience but also empowers users to choose the best option for their specific lawn care needs. The finely engineered cutting deck design also ensures an even cut, enhancing the overall appearance of the lawn.

Durability is a hallmark of Snapper products. Each model features a heavy-duty steel construction and a robust deck that can withstand the rigors of frequent use. Users can expect these mowers to provide years of reliable service with minimal maintenance, thanks to their high-quality components and user-friendly design.

These mowers are also designed with ease of use in mind. Features such as an adjustable cutting height allow users to customize their mowing experience, ensuring optimal results for various grass types and conditions. Additionally, the ergonomic handles provide comfort during operation, reducing fatigue for the operator.

The Snapper NZM series also incorporates technological advancements such as easy-start systems for quick ignition and enhanced maneuverability. The compact design of these mowers promotes easy storage and transportability, making them an ideal choice for homeowners with limited space.

In summary, the Snapper NZM25523KWV, NZM25613KWV, NZM19483KWV, NZM21523KWV, and NZM27613KH represent a commitment to quality, efficiency, and versatility in lawn care tools. With their powerful engines, innovative cutting systems, durable construction, and user-friendly features, these mowers are well-equipped to tackle any mowing challenge, ensuring a beautifully manicured lawn every time.
Top Page Image Contents