Snapper S150X manual Uncrating, Battery Installation, Connect Battery

Page 3

S150X 21HP, 23HP, 25HP & 27HP - 48” & 52” Mower Deck

Uncrating

1.Using a reciprocating utility saw or equivalent, cut crate away from bottom skid. Remove crate. Remove shrink-wrap plastic.

2.Cut nylon banding from front of the frame and rear rear bumper.

IMPORTANT NOTE

When cutting crate from bottom skid, use caution around tractor tires and mower rollers.

3.Open the hydraulic release valves. To open the release valves, turn the release valve, which is located on front of the pump, counter-clockwise 2 full turns MAX. See Figure 1 for valve location.

4.Push down on the parking brake lever (A, Figure 2) to release the parking brake.

5.Be sure there are no nails or sharp objects on the bottom skid to puncture the tractor’s tires. Roll the tractor forward off the bottom skid.

6.After moving the tractor, re-engage the pumps (drive position) by turning the release valves clockwise and tighten to 80-120 in/lbs (9-13.5 N.m.).

Battery Installation

WARNING

BATTERY SAFETY RULES

•Battery acid causes severe burns. Avoid contact with skin.

•Wear eye protection while handling the battery.

•To avoid an explosion, keep flames and sparks away from the battery, especially while charging.

•When installing the battery cables, CONNECT THE POSITIVE (+) CABLE FIRST and the negative (-) cable last. If not done in this order, the positive terminal can be shorted to the frame by a tool.

Connect Battery

1.Connect the red positive battery cable (B, Figure 3) to the positive battery post.

2.Connect the black negative battery cable (A) to the negative battery post.

A

Figure 1. Hydraulic System By-Pass

A.Hydraulic Release Valve (left-hand pump shown)

A

Figure 2. Disengaging the Parking Brake (lever shown in disengaged position)

A. Parking Brake Lever

A

B

Figure 3. Connect the Battery

A.Positive (+) Cable & Terminal

B.Negative (-) Cable & Terminal

10/2007

3

TP 300-7343-A-M1-SP

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Dealer Setup Adjustment Instructions S150X 21HP, 23HP, 25HP & 27HP 48 & 52 Mower Deck Quick Setup ListBattery Installation Connect BatteryUncrating Tractor Assembly Motion Control Handle AssemblySeat Assembly Assemble the Top Loop Roll Bar AssemblyInstall the Roll Bar Install the Upright TubesRoll Bar Orientation Tire Pressure Check Fluid LevelsCheck Tire Pressures Check the Engine Oil Level Check the Hydraulic Oil LevelCheck Torque Mower Blades Check the Mower AssemblyCheck Lift Rod Timing Check Deck Rod Timing4 Locations Deck Leveling AdjustmentMower PTO Belt Spring-loaded Idler Stationary Idler Pulley Check Deck Drive BeltLubricating the Front Casters LubricationGrease OilAdding Fuel Starting The EngineTo add fuel Functional Tests Perform Safety ChecksSeat Adjustment Suspension Seat Seat AdjustmentMotion Control Handle Adjustment Neutral Adjustment RH side shown Adjustment Linkage Rod Nuts Return-To-Neutral & Neutral AdjustmentParking Brake Adjustment Brake Spring Adjustment Nut Parking Brake AdjustmentS150X 21HP, 23HP, 25HP & 27HP 48 & 52 Mower Deck

S150X specifications

The Snapper S150X is a compact yet powerful lawn tractor designed for homeowners who crave efficiency and ease of use while maintaining their lawns. This versatile machine boasts an array of features, technologies, and characteristics that set it apart in the competitive lawn care market.

One of the standout features of the Snapper S150X is its robust 150cc engine, providing the power necessary to tackle a variety of mowing tasks. The engine is designed for optimal performance while maintaining fuel efficiency, ensuring that users can mow large areas without constant refueling. Coupled with a dual blade system, the S150X delivers a clean, precise cut that enhances the overall appearance of your lawn.

The S150X is equipped with an innovative pivoting front axle that allows for superior maneuverability. This design allows the tractor to navigate around tight corners and obstacles with ease, making it an excellent choice for yards with intricate landscaping or garden features. Additionally, the compact size of the S150X enables it to access smaller spaces that traditional lawn tractors may struggle to reach.

One of the significant advantages of the Snapper S150X is its user-friendly design. The seat is adjustable and ergonomically designed for comfort, ensuring that operators can mow for extended periods without discomfort. Its easy-to-use control panel features a simple ignition switch and an intuitive gearshift, making it accessible for users of all skill levels.

Moreover, the Snapper S150X comes with Snapper's innovative electric start feature, which eliminates the hassle of manually starting the engine. This convenience allows users to quickly start mowing their lawns without needing to crank the engine repeatedly.

The S150X also incorporates a durable steel frame and chassis, ensuring longevity and resilience against the rigors of regular use. The powder-coated finish adds an extra layer of protection against rust and weather elements, keeping the machine looking great for years.

For those concerned about maintaining a healthy lawn, the Snapper S150X offers a mulching capability, which finely chops the grass clippings and returns them to the soil, providing vital nutrients to the lawn and promoting healthy growth.

In conclusion, the Snapper S150X combines power, agility, and ease of use, making it an excellent lawn tractor choice for homeowners. With features like its 150cc engine, pivoting front axle, and user-friendly design, the S150X stands out as a reliable companion for lawn care enthusiasts looking to maintain a pristine outdoor space.
Top Page Image Contents