Snapper S150X manual Check Deck Rod Timing, Check Lift Rod Timing

Page 9

S150X 21HP, 23HP, 25HP & 27HP - 48” & 52” Mower Deck

Check Deck Rod Timing

1.Park machine on a flat, level surface. Disengage the PTO, stop the engine and engage the parking brake. Rear tires must be inflated to 15 psi (1,03 bar); front tires to 25 psi (1,72 bar).

2.To check the lift rod timing, measure and record the distance between the lift pivots and the rod pivots. Repeat for the other side of the machine. See Figure 15.

3.If the measurements for the rods are equal, no further adjustment is required. If the measurements are NOT equal (greater than 1/8” (3,17mm) difference), adjustment is required, continue with Step 5.

4.Lock the deck lift pedal in the 5” (12,7cm) position. Remove the cutting height adjustment pin and lower the mower deck.

5.To ensure that the deck is in the lowest position, push the pedal by hand towards the rear of the machine and install the height adjustment pin in the 3” (7.6cm) position to hold in place.

6.Block up the mower deck until all hanger chains are slack. Refer to Figure 16.

7.See Figure 15. To adjust the lift rod, loosen the jam nut on the clevis then remove the 1/2” clevis pin fastening the clevis the the lift pivot arm. Turn the clevis clockwise to shorten the distance between the rod pivots or counterclockwise to lengthen the distance between the rod pivots. Reinstall the clevis on the lift pivot arm and secure with the 1/2” clevis pin previously removed. Tighten the jam nut against the clevis.

8.Remove the blocks from under the mower deck.

9.Remove the the cutting height adjustment pin from in front of the deck lift pedal arm. Lift the mower deck and reinstall the adjustment pin in the desired mowing height.

Figure 15. Check Lift Rod Timing

Figure 16. Adjust Lift Rod Timing

10/2007

9

TP 300-7343-A-M1-SP

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Dealer Setup Adjustment Instructions S150X 21HP, 23HP, 25HP & 27HP 48 & 52 Mower Deck Quick Setup ListBattery Installation Connect BatteryUncrating Tractor Assembly Motion Control Handle AssemblySeat Assembly Install the Roll Bar Roll Bar AssemblyInstall the Upright Tubes Assemble the Top LoopRoll Bar Orientation Check Tire Pressures Check Fluid LevelsCheck the Engine Oil Level Check the Hydraulic Oil Level Tire PressureCheck Torque Mower Blades Check the Mower AssemblyCheck Lift Rod Timing Check Deck Rod Timing4 Locations Deck Leveling AdjustmentMower PTO Belt Spring-loaded Idler Stationary Idler Pulley Check Deck Drive BeltGrease LubricationOil Lubricating the Front CastersAdding Fuel Starting The EngineTo add fuel Functional Tests Perform Safety ChecksSeat Adjustment Suspension Seat Seat AdjustmentMotion Control Handle Adjustment Neutral Adjustment RH side shown Adjustment Linkage Rod Nuts Return-To-Neutral & Neutral AdjustmentParking Brake Adjustment Brake Spring Adjustment Nut Parking Brake AdjustmentS150X 21HP, 23HP, 25HP & 27HP 48 & 52 Mower Deck

S150X specifications

The Snapper S150X is a compact yet powerful lawn tractor designed for homeowners who crave efficiency and ease of use while maintaining their lawns. This versatile machine boasts an array of features, technologies, and characteristics that set it apart in the competitive lawn care market.

One of the standout features of the Snapper S150X is its robust 150cc engine, providing the power necessary to tackle a variety of mowing tasks. The engine is designed for optimal performance while maintaining fuel efficiency, ensuring that users can mow large areas without constant refueling. Coupled with a dual blade system, the S150X delivers a clean, precise cut that enhances the overall appearance of your lawn.

The S150X is equipped with an innovative pivoting front axle that allows for superior maneuverability. This design allows the tractor to navigate around tight corners and obstacles with ease, making it an excellent choice for yards with intricate landscaping or garden features. Additionally, the compact size of the S150X enables it to access smaller spaces that traditional lawn tractors may struggle to reach.

One of the significant advantages of the Snapper S150X is its user-friendly design. The seat is adjustable and ergonomically designed for comfort, ensuring that operators can mow for extended periods without discomfort. Its easy-to-use control panel features a simple ignition switch and an intuitive gearshift, making it accessible for users of all skill levels.

Moreover, the Snapper S150X comes with Snapper's innovative electric start feature, which eliminates the hassle of manually starting the engine. This convenience allows users to quickly start mowing their lawns without needing to crank the engine repeatedly.

The S150X also incorporates a durable steel frame and chassis, ensuring longevity and resilience against the rigors of regular use. The powder-coated finish adds an extra layer of protection against rust and weather elements, keeping the machine looking great for years.

For those concerned about maintaining a healthy lawn, the Snapper S150X offers a mulching capability, which finely chops the grass clippings and returns them to the soil, providing vital nutrients to the lawn and promoting healthy growth.

In conclusion, the Snapper S150X combines power, agility, and ease of use, making it an excellent lawn tractor choice for homeowners. With features like its 150cc engine, pivoting front axle, and user-friendly design, the S150X stands out as a reliable companion for lawn care enthusiasts looking to maintain a pristine outdoor space.
Top Page Image Contents