Snapper S150X manual Roll Bar Orientation

Page 6

S150X 21HP, 23HP, 25HP & 27HP - 48” & 52” Mower Deck

5.Install the top loop (A, Figure 10) onto the upright tubes (B). From the outside, install the 1/2-3” bolt (C) through the top loop and upright tube, then through the retainer pin assembly (D), as shown in Figure 5E. Loosely install the 1/2” side lock nut on the bolts. Repeat this process for the other side.

6.Tighten the hardware installed in steps 3 & 4 for securing the roll bar upright tubes to the roll bar pocket. Tighten the hardware until there is no movement in the upright tubes.

7.Tighten the 1/2”-3 bolts and hex side lock nuts (C & E) securing the top loop (A) to the upright tubes (B). Do not over-tighten. The top loop should pivot snugly

with the retainer pins removed.

8.Raise the top loop (A) until the rubber stops (F) contact the upright tubes.

9.Push or pull the top of the roll bar forward against the rubber stops and install the retainer pins and hair pin

clips to secure the roll bar in the raised position.

Figure 9. Roll Bar Orientation

A

E

A

 

 

 

 

 

 

 

 

 

 

 

C

D

E

E

D

C

F

D

 

 

 

 

 

B

 

 

 

 

B

 

 

 

 

 

 

 

B

 

 

 

 

 

Figure 10. Install Top Loop (Right Side Shown)

A.Top Loop

B.Upright Tube

C.1/2” x 3” Bolt GD.5

D.Retainer Pin Assembly

E.1/2” Side Lock Nut

F.Rubber Stop

TP 300-7343-A-M1-SP

6

10/2007

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Dealer Setup Adjustment Instructions Quick Setup List S150X 21HP, 23HP, 25HP & 27HP 48 & 52 Mower DeckBattery Installation Connect BatteryUncrating Tractor Assembly Motion Control Handle AssemblySeat Assembly Install the Upright Tubes Roll Bar AssemblyInstall the Roll Bar Assemble the Top LoopRoll Bar Orientation Check the Engine Oil Level Check the Hydraulic Oil Level Check Fluid LevelsCheck Tire Pressures Tire PressureCheck the Mower Assembly Check Torque Mower BladesCheck Deck Rod Timing Check Lift Rod TimingDeck Leveling Adjustment 4 LocationsCheck Deck Drive Belt Mower PTO Belt Spring-loaded Idler Stationary Idler PulleyOil LubricationGrease Lubricating the Front CastersAdding Fuel Starting The EngineTo add fuel Perform Safety Checks Functional TestsSeat Adjustment Seat Adjustment Suspension SeatMotion Control Handle Adjustment Return-To-Neutral & Neutral Adjustment Neutral Adjustment RH side shown Adjustment Linkage Rod NutsParking Brake Adjustment Parking Brake Adjustment Brake Spring Adjustment NutS150X 21HP, 23HP, 25HP & 27HP 48 & 52 Mower Deck

S150X specifications

The Snapper S150X is a compact yet powerful lawn tractor designed for homeowners who crave efficiency and ease of use while maintaining their lawns. This versatile machine boasts an array of features, technologies, and characteristics that set it apart in the competitive lawn care market.

One of the standout features of the Snapper S150X is its robust 150cc engine, providing the power necessary to tackle a variety of mowing tasks. The engine is designed for optimal performance while maintaining fuel efficiency, ensuring that users can mow large areas without constant refueling. Coupled with a dual blade system, the S150X delivers a clean, precise cut that enhances the overall appearance of your lawn.

The S150X is equipped with an innovative pivoting front axle that allows for superior maneuverability. This design allows the tractor to navigate around tight corners and obstacles with ease, making it an excellent choice for yards with intricate landscaping or garden features. Additionally, the compact size of the S150X enables it to access smaller spaces that traditional lawn tractors may struggle to reach.

One of the significant advantages of the Snapper S150X is its user-friendly design. The seat is adjustable and ergonomically designed for comfort, ensuring that operators can mow for extended periods without discomfort. Its easy-to-use control panel features a simple ignition switch and an intuitive gearshift, making it accessible for users of all skill levels.

Moreover, the Snapper S150X comes with Snapper's innovative electric start feature, which eliminates the hassle of manually starting the engine. This convenience allows users to quickly start mowing their lawns without needing to crank the engine repeatedly.

The S150X also incorporates a durable steel frame and chassis, ensuring longevity and resilience against the rigors of regular use. The powder-coated finish adds an extra layer of protection against rust and weather elements, keeping the machine looking great for years.

For those concerned about maintaining a healthy lawn, the Snapper S150X offers a mulching capability, which finely chops the grass clippings and returns them to the soil, providing vital nutrients to the lawn and promoting healthy growth.

In conclusion, the Snapper S150X combines power, agility, and ease of use, making it an excellent lawn tractor choice for homeowners. With features like its 150cc engine, pivoting front axle, and user-friendly design, the S150X stands out as a reliable companion for lawn care enthusiasts looking to maintain a pristine outdoor space.
Top Page Image Contents